Hola: Buenas tardes. Quisiera comentarle un problema que tengo con un Mercedes Benz clase S 400 Hybrid del año 2010. Problema : Fusible de 60A fundido (del aire acondicionado). Compresor de aire acondicionado (Cambiado por uno nuevo) pero sigue sin funcionar por causa del fusible en mal estado. Pregunta: Como puedo solucionar o cambiar este fusible de 60A. En la casa Mercedes no lo tienen como recambio. Que solución: crees o me aconsejas, para realizar la reparación. Le agradecería una ayuda si es posible. Gracias por atenderme Un cordial saludo nota: (no hablo ni tampoco escribo en ingles) estoy en Isla Mallorca (ESPAÑA) nombre: Martín Martínez
The volume level is far2 low& requires adjustment &reposting IMO. I'm really interested &can't hear well even @50% volume wherein 15% is normal. U can tell when the volume sync is way off when commercial play & blow u out of the room.
Sorry, but I can hear it find on the small speaker on my laptop. I did this video early in the COVID year before I got a microphone. I am using a mic on all newer videos. Thanks for watching.
Is the clutch even on in the Lincoln, if not, start there? If the compressor is not pumping correctly, the low side pressure will be high and high side pressure will be low.
Hi Roshan, I think I got that compressor off a older 2-mode hybrid system that was used in the 2007 - 2008 Durango or Tahoe. These compressors are very expensive! Good Luck.
Not really because for example a prius AC compressor has CAN communication lines which communicate with the cars computer. They controls are a lot more complex than a house AC. A house AC technician would have a hard time diagnosing it.
@@ronaldoquintos1675 I guess you haven’t worked on any of the 20SEER American standard heat pump units with variable speed three phase DC scroll compressors. Yes, they are just as complicated.
![Lp. Последняя Реальность #107 РОДНОЙ ДОМ [Финал] • Майнкрафт](http://i.ytimg.com/vi/IK3QKzKUlHM/mqdefault.jpg)
😮GREAT VIDEO 😮
Does it have a condenser to run system
Спасибо большое!
Good day. What is the correct procedure in checking resistance in a Nissan Leaf a/c compressor?
Can it be converted to onboar air compressor?
Hello sir I have Toyota electeric compressor the same in the right side of your video can I test it outside the car
Qhat goes out on hybrid compressor when it tryst to run it sounds like clutch noise you typically hear on regular vehicles
Wow good job
Mr. Pentane thanks, very informative video.
👍.
What's the common fault in elrctric compressor.
And durability. 🎉
Is there a number for Mr Pentane? I need some assistance
Hola: Buenas tardes.
Quisiera comentarle un problema que tengo con un Mercedes Benz clase S 400 Hybrid del año 2010.
Problema : Fusible de 60A fundido (del aire acondicionado).
Compresor de aire acondicionado (Cambiado por uno nuevo)
pero sigue sin funcionar por causa del fusible en mal estado.
Pregunta: Como puedo solucionar o cambiar este fusible de 60A.
En la casa Mercedes no lo tienen como recambio.
Que solución: crees o me aconsejas, para realizar la reparación.
Le agradecería una ayuda si es posible.
Gracias por atenderme
Un cordial saludo
nota: (no hablo ni tampoco escribo en ingles)
estoy en Isla Mallorca (ESPAÑA)
nombre: Martín Martínez
The volume level is far2 low& requires adjustment &reposting IMO. I'm really interested &can't hear well even @50% volume wherein 15% is normal.
U can tell when the volume sync is way off when commercial play & blow u out of the room.
Sorry, but I can hear it find on the small speaker on my laptop. I did this video early in the COVID year before I got a microphone. I am using a mic on all newer videos. Thanks for watching.
Hi, can i run the three phase motor on this hybrid compressor using a variable frequency drive?
Most of them, yes. Should be ~240v and no idea what the ideal frequency would be.
Nice
.
I believe the compressor on my Lincoln mkz is needing to be replaced, how would I diagnose that the compressor is broken?
Is the clutch even on in the Lincoln, if not, start there? If the compressor is not pumping correctly, the low side pressure will be high and high side pressure will be low.
Which car is that compressor with the built-in invertor from? That may be perfect for ev conversions.
Hi Roshan, I think I got that compressor off a older 2-mode hybrid system that was used in the 2007 - 2008 Durango or Tahoe. These compressors are very expensive! Good Luck.
@@ProfessorPentane I need your assistance with my truck! How can I contact you?
Why assume this is an AC motor? “3phase”?
Masala
I have an Acura ilx hybrid can I drive with ac off until I can change the ac compressor it’s very noisy
Yes you can
Am an Ac Tecnican but am looking for work
I fix all kind of AC Compressor with big experience
Where are you living
I want to now type of refrigerant in highbrid ac compressor
134A
Sir praies comperaser
Is there a way to make this to work on 12volts dc ?
Hi John, I know no way to convert a high voltage compressor to work on 12 volts. Thanks for watching, PP.
@@ProfessorPentane thanks for replying ..
@@ProfessorPentane do you know what type of oil a hybrid compressor would need?
@@ramiromoreno1386, POE oil.
Pretty much the same as residential AC compressors then. Very interesting
I think normal residential AC units have single phase motors.
@@ghenkhoash2440you're correct yes they do. I meant in their mechanical construction..
Not really because for example a prius AC compressor has CAN communication lines which communicate with the cars computer. They controls are a lot more complex than a house AC. A house AC technician would have a hard time diagnosing it.
@@ronaldoquintos1675 OK, like VRV AC
@@ronaldoquintos1675 I guess you haven’t worked on any of the 20SEER American standard heat pump units with variable speed three phase DC scroll compressors. Yes, they are just as complicated.
I have 2010 prius with broken AC compressor. Can i still drive it without fixing it? Will it overheat my hybrid system?
NO !
your hair looks like it's been in a few electrical shock sessions
I like his hair style, like its his trademark
I hate when they combine components, no matter which part goes out you end up replacing the whole thing. it's a waste of good parts and money.