Hydraulic Pump + AC Compressor = Useful Unit
Вставка
- Опубліковано 9 тра 2023
- In this video we show you the connection of a hydraulic pump with an air conditioning compressor.
It is a useful device and has many advantages.
- The hydraulic system works only when we turn it on, thanks to which the oil, pump, seals wear much slower.
- The engine is not loaded all the time, so the fuel consumption is lower.
- In addition, the battery and starter have a much easier start of the engine when the hydraulics are not permanently connected.
This is part of a big project we are working on right now and we decided to show this element separately to show how it is made and how it works.
Check out our other videos
• Engine starter + Hydra... - Engine starter + Hydraulic pump = Something COOL
• This Machine is Great ... - This Machine is Great for Shredding Branches
• Custom Trike: Motorcyc... - Making Racer Trike with Car Wheels
That is pure genius!! It totally solves a problem I’ve been having on my own build…. It has never occurred to me to use the electric clutch on an a/c compressor. That alone got my subscription!
I can do what you do but you do it much faster and I really enjoy watching it's nice to have a complete machine shop an excellent to see that your ideas are fully formed nicely done
Very nice, I can think of a lot of uses that could be applied to, one being a lift gate for a pickup or maybe a hydraulic crane for loading and offloading steel or wood onto a trailer. Good work, be watching for your intended application.
So, essentially, a hydraulic pump with a magnetic clutch? Very cool!!! Love your videos!!!
Nice work. I made a similar unit over 10 years ago using an ac clutch from a 1991 bronco. I made it for my 3 yard dump truck. It held strong, never slipped, and never failed. I sold that truck last year and that clutch unit was still going well. That unit you made will work great and hold up to anything you throw at it.
You are the only other person I've heard of doing this.
Nice work!
Не понимаю я по вашему пишите по нашему по русски
@@user-kd8us5mh8o не ленись, учи английский…
@@user-kd8us5mh8o Хорошая работа. Я сделал аналогичный агрегат более 10 лет назад, используя сцепление переменного тока от bronco 1991 года выпуска. Я сделал его для своего трехметрового самосвала. Он держался крепко, никогда не скользил и не выходил из строя. Я продал этот грузовик в прошлом году, и сцепление все еще работало хорошо. Этот агрегат, который вы сделали, будет отлично работать и выдержит все, что вы в него бросите.
Вы единственный человек, о котором я слышал, который делает это.
Отличная работа! это то что он написал. а так что слабо через переводчик перевести?
It took me a minute to figure out what you were doing. I thought you were using the AC compressor but what you wanted was the magnetic clutch assembly and the housing was convenient since you could install a different shaft to couple to the hydrolic pump. Nifty home made hydrolic pump.
Genius. You just gave me the idea for building a log splitter, and other projects I have rattling around in my brain. So, thank you.
Jestem pod wrażeniem pomysłów. SZACUN. Pozdrawiam z Gdańska
This was cool just to see the tear down of and axial piston compressor. It's always fun to see the inside of things that you have only seen in animations.
You made a home made pto. For those that dont know what that means. It stands for powe take off. It is how hydraulic units work on things like tow trucks and other construction equipment. Very nice you are a great craftsman.
Semua pekerjaan yang anda pertontonkan dalam video video anda memang layak untuk ditonton,dan sangat banyak menginspirasi orang lain...lanjutkan teman
Majster twoje konstrukcje, są MEGA~GIGA~TURBO~ZAJEFAJNE... NO😊
Skąd ty bierzesz pomysły na takie cudeńka? Ciekawe jaki będzie efekt końcowy!!!? Czekam z niecierpliwością. Pozdrowienia dla całej ekipy.
I was waiting for you to use the A/C compressor for a pump and the pump for a motor. I was thinking high volume oil flow. But what you did works too!
Zawsze mnie zastanawia jak dużo jest / nie jest pokazane: wygląda jak robione "na żywo" wedle ogarniętej wcześniej samej zasady działania, ale pewnie jakieś liczenie, czy prototypowanie się przynajmniej zdarza. Świetna inwencja, jak zwykle :D
Импровизация, хорошее воображение, немного знаний в механике, обработке, свойства металлов, пару станков.
That is thinking outside the box and using what is available to you. Looks loke a great project coming. Well done. 👍👍👍👍👍
You just built a 5,000 dollar unit for maybe 200 bucks in parts. Hats off to you 😁❤
11
8
knowledge equals capital 😊
Hardly $5,000 as you claim. You can buy a complete, capable, and powerful log splitter brand new for less than half of what you claim.
@@user-yy6ul9xk8nمن المشاركات المكتوبة
I'm surprised the aircon clutch holds torque that well! Nicely done. I like how you did that internal keyway.
Pretty sure it won't hold the torque!
@@davidut55I mean, it need to compress 400psi of refrigerant
What a wonderful idea I want to convert my lawnmower into fully hydraulic and this is how I’m going to do it
Ya got this ya make it look easy to build understand and not a whole lot of tools thks for sharing your project with us keep making projects like this ya got this
Helal olsun usta uzun videoyu kisa sure icinde cektiginiz icin ayrica teşekkürler elinize saglik
First thought I had was log splitter.. Great production!
That is a very nice way to modify the OEM "mower" pulley. Apparently it is common for people to modify mowers for high speed by flipping over that pulley assembly, which then has to be hacked in some such fashion. So cool!
That is the best idea ever. I have wanted to build a tracked hydraulic vehicle. I was thinking of using zero turn lawnmower transaxles.
Put a heavy duty microswitch to the lever by using a "B" cam, so the microswitch become depressed when you pull the lever in either direction, thus the pump only works when needed.
I love watching your videos. Of course I don't understand anything, BUT it's very exciting, good luck and success. Greetings from Tbilisi!
Nice video, I like the test in the end , this goes through wood like butter ,greetings from Spain
Wow so awesome you turn the compressor work into different types 👍👍
This was awesome to see ....I cant wait to see the next project !!! Always something cool and interesting !!
Everything solid as a rock!
I like that.
Regards from Belgium
Aż się boję co żeś znowu wymyślił, lecz mimo tych obaw czekam efekt końcowy. 😎
The entire video was impressive.
What was most impressive is he found a scrap yard AC compressor with a working clutch.
That’s very resourceful! I’m just trying to grasp the reason for it though. Cause a hydraulic circuit will be able to drain back to the tank when it’s not being used while the pump is still going.
The only real benefit I see of this setup would be if you were running a hydraulic motor from the pump, you’d be able to start and stop it electrically.
That is my thoughts as well.
Он не знает принцип работы распределмтеля
Либо очень плохо заводиться мотор
I picked up an alternator with a hydraulic pump attached to the back. I like the use of the clutch so you don't have the starter turning the pump while trying to start the engine.
Oglądam twoje filmiki jak coś robię bardzo pomagają w sprawach technicznych . Pozdrawiam
Excellent work 👍👍👍Thank you for sharing. Be safe🇨🇦
Браво, снимаю шляпу перед мастерами. Классный аппарат получился👍
Excellent work you are great mechanic.
I'm imagining some kind of tree stump annihilator. Great use of a decent clutch!
Damn. You guys have unlimited imagination. Awesome job
thank you teacher❤❤❤
Great job, thank you brother. You are so talented
Great job! Thanks for sharing!
👍🏻👍🏻
Bạn thật sự là một kỹ sư chuẩn. Làm những điều đó rất nhiều mất nhiều thời gian của bạn và đã có một kết quả hợp lý.
Nice show of skills… common sense plays a massive role in all of this.
Nicely done and entertaining video. It was not what I expected, but the repurposing of the clutch performs those functions needed for the track loader application.
Wow... Pretty fantastic work, dude! 😃
Looking forward to the next parts!
Stay safe there with your family! 🖖😊
Skills! Looking forward to following along as usual.
The master at work!!! 👍
Nicely done. 100 points awarded :)
Absolute genius idea!
I have never seen such homemade crafts in the Russian UA-cam segment. class
Brilliant. Loved it.
Amazing talent and understanding of the process
My MOSTEST favorite channel.
Very excited to see what kind of tracked vehicle you're making.
Great work. Anxious for next video. Greetings from Brazil.
verry nice !!! thats some real inspiration for my tractor loader build !!!
az ilyen preciz szep munkat nagyon tudom szeretni mutatja a tudasodat sok minden jot neked
I marvel at your imagination and ingenuity
Very nice build!
I would expect to do something with the compresing part of the a/c unit though...
They have been used as onboard air compressors by off-roaders.
That would have been a convenient use.
They have been used as onboard air compressors by off-roaders.
That would have been a convenient use.
Congrats to the master very talented
Awesome as always 👍👍. Cheers, Stuart 🇦🇺
Excellent video ! 👍
Very impressive. Well done!
Very nice, and inspiring!
bardzo fajny projekt
Poland brother mind blowing work you are awesome ❤❤❤
Wow congratulations for the First work 😊👏👏🔝🔝
Nice work big admire of your engineering
Is making a cnc machine on your list? Thinking of some of the fabrication you do it would be very useful. Thanks for all the videos.
Great video...
Amazing skills.
Nice work as always 👍👍
I've been trying to think of a way to put a hydraulic PTO on my riding mower so I can convert the blade drive system from belt to a belt and chain hybrid! This will work PERFECTLY for that!!!!
Good job mister well done
That really is a fantastic idea!
Such an extraordinary work. wish you are in Canada and we are mates.
show, excelente trabalho
I'm sure will be an amazing project
Your shenanigans are strong, subed 😎💯
Very nice work done
Ok by 1:45 ( and I think I did ff to get here) this
Very smart clever
Editing of excellent cam and sound, has easily
Gotten me to the conclusion of a . Very very. Well done vid
Marvelous masterpiece.
Thats pretty cool.
And seeing the tracks, im guessing you are building a skidloader?
Super cool i l❤ve your work guys Fantastic 👍😊👍
Great work as always 😄😄
true definition of engineering
Smart call never thought of using a clutch off an AC compressor i did the stupid thing off buying it off the shelf lol, i guess my only question would be how much load it can handle when its actually working
Очень хорошо!
very nice. im starting mine today
1960s main frame computers used a similar setup to run magnetic tape drives. The ones with the tape reels that start and stop really fast.
very good with details
How about making a car alternator welder next? Could be a fun project
this is a really cool setup but can i ask why the hydraulic pump needs a clutch vs just direct drive and allowing it to run open circut? i could see the need for a clutch if this pump was on a vehicle to avoid long run times when the pump isnt needed. but why here?
Thanks to you i got a good idea. Thank you 👍
Quem sabe fazer fais tudo o que vem na imaginação 😎😎
Freaking AWESOME!!
Keep up with the good work
Große Klasse!!!👍👍👏👏
Great Job!
Как всегда шикарное решение и исполнение. Удачи и новых идей.
Он по ходу Русофоб! Коменты на Русском не читает!
@@user-pw4ee3ii9y почему вы так пишите?а откуда вы знаете что он русофоб?потому что вы так говорите?вы себе некоторые вещи говорите-побольше оптимизма дружище-с уважением
@@user-pw4ee3ii9y Не Русофоб а противник политики сближения с роzzией, человек, ненавидящий руzzkue комментарии👆👆👆