ARNOZ Virtual Pinball Boards ( New Lineup )
Вставка
- Опубліковано 20 лип 2024
- Showcasing Arnoz's Shop new virtual pinball boards lineup
Virtual Pinball Chat ( Discord ): bit.ly/virtualpinball
Major Frenchy Website: www.majorfrenchy.com
Virtual Pinball Parts list: www.majorfrenchy.com/parts
CHAPTERS:
0:38 All Boards Overview
1:38 Dude's cab overview
3:14 Walter Driver Overview
4:07 Mos'Light Overview
5:25 Button Boars Overview
5:45 Connecting Boards
7:32 Connecting Buttons
8:51 Plunger POTAR
10:59 RGB Flashers
12:02 12V Flasher
12:47 Connecting 2nd Walter
13:01 Mos8
14:46 Configurator software
18:46 DOF
19:22 Online DOF Config tool
20:45 Testing Boards and DOF in a VPX table
All Arnoz boards are listed on his website: shop.arnoz.com/en/
In the video i used the following boards:
- DUDE'S CAB
- MOS8
- WALTER DRIVER
- 12V FLASHER
- FLASH25 + Plug ( 5X )
- BUTTON BOARD
- POTAR
- DTG STROB X2
- Configurator tool: - - dude.arnoz.com/DudesCab/Dudes...
- DOF download: mjrnet.org/pinscape/dll-update...
- Online DOF config: configtool.vpuniverse.com/logi...
- Major Frenchy DOF tutorial :www.majorfrenchy.com/dof
- Game Club Central 64 bit DOF installation guide: • Upgrading to 64-Bit Vi... - Ігри
Little details about these boards really do separate them from other options in my mind... love that you can set an LED falloff on the flashers!
Great video for great boards. Thank you for being awesome Major Frenchy! Thank you Arnoz for powering up and improve our hobby!
Thanks to you Major Frenchy and to Arnoz! Great video overview of some really nice hardware!
Really nice to see a new generation of controller. Arnoz is doing some amazing work
Thank you for going over boards with the masses
Gotta love Arnoz's stuff, they really work well. My whole cab is powered by Arnoz. What would be great though is if his boards could be stacked/attached togeather like RPi daughter boards are. That way we can just have one central control box so to speak. Obviously the fuses would need to be relocated to the top.
Great recommendation, i will mention it to him.
Great to see you back. Arnoz puts out the best stuff IMO
Thanks. It has been awhile. Glad to see you watching the videos
I just odered the new dudes board. Your vid comes very handy. Thx a lot :)
Glad I could help!
Great overview, bud. I don’t plan on building a new cab anytime soon, but I may just buy these boards in the mean time.
Thank you.
this is amazing
Nice review. I already have a rigmaster, which is overkill for my current setup. I am now telling myself i dont need new boards, i dont need new boards. If it aint broke....but the dude looks so nice!
Keep the Rigmaster, it's a good board
Makes me want to rebuild my cab. Very nice.
How have you been man. Still fixing pinball cabs? That will be one of my project one day. Buy a damaged one and rebuild
@@MajorFrenchyyep. Still fixing up real ones. It’s a hoot. You should try it. Pretty fun to get them working again! I need to get back into the virtual stuff. It was a lot of fun! Haven’t played it much since the babies were born… almost 3 years ago. 😂
Did you felt the deference in latency for the flipper buttons? Love that we now have a one tailored solution for every pincab needs and no need of the KLZ25. Great review 👍👍
Thank you for the comments. I personally did not feel a big difference. But very tough to measure the actual latency. I just went by what Arnoz told me. He has tweaked the Flipper ports to be faster than the regular Dude's cab ports. For folks that are entirely geared towards virtual pinball performance and have a real leaf switch, it probably will make a difference.
Merci petit chaton
Ca fais plaisir gros minet
i dont need a new hobby i dont need a new hobby i dont need a new hobby i dont need a new hobby i dont need a new hobby
You will be amazed by this hobby. You will be amazed by this hobby
nice Video thx im also order the Dudes Board, is it possible to share whit us the 3D Printing Plunger stuff? thx for that
Arnoz sell those as well and I believe he is actually giving away the file on the plunger page
Check Arnoz's actual plunger description page. He was nice enough to share the STL: shop.arnoz.com/en/3d/65-67-plunger-3d-print.html#/26-color-black
Is it possible to import a board like this to brazil? Does it work with addressable leds or do I have to buy a another sub board?
I think Arnoz ships worldwide. And this does not do addressable led. The Pinmos board does. I made tutorials on it in the past , you can check my list of videos
@MajorFrenchy thanks Frenchy. Ive been trying to contact the Cleveland guy but the extreme kit is too much to afford and pay the taxes. I don't mind solenoids much, but a shaker plunger and leds would be the sky for me. By the way my board is so simple it only lights one button
With the Dude's board...do no longer need a KLZ?
That is correct. And it does not work with the Pinscape
Having something to replace the kl25z is a god save!
Yeah. I stopped counting how many kl25z i blew over the years i stopped counting at 4 😅
Slightly NSFW at 4:51 that RGB button board has a little easter egg.
Not to blow your scoop, but all his boards do. 😄