Chapin 97902 Battery Push Sprayer Unbox and Setup
Вставка
- Опубліковано 2 жов 2024
- In this video we unbox and setup the Chapin 97902 Battery Push Sprayer.
Check out the product demo here: • Chapin 97902 Battery P...
Chapin 97902 Battery Push Sprayer: amzn.to/3WZeWjU
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Please
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣
╠╗║╚╝║║╠╗║╚╣║║║║║═╣
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
To Support the Channel, It's Free, Just Hit That Button.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Recording Equipment
Samsung S23 Ultra: amzn.to/478GTL3
DJI Osmo Action 3: amzn.to/3OhqPxY
DJI Osmo Action 2: amzn.to/3ODnnyO
Insta360: amzn.to/3zttkHD
DJI Wireless Lavalier Mic: amzn.to/3Om5ljc
74’’ Camera Tripod: amzn.to/43ZA9MQ
Vehicle Camera Mount: amzn.to/3HhPlLb
#btbuildthings #chapin #lawn #lawncare #outdoor #diy
99% of the viewers are not Subscribed. Please Subscribe to help support the Channel! 😊
Is there a follow up video for this?
Yes there is, right here: ua-cam.com/video/Q6ne1gNGuf0/v-deo.html
@@btshomedition ❤
Hey mate, did you have trouble purging yours? My pump is attempting to pump but no water is coming out?
No, I didn't have any issues with the pump. Make sure there is no debris in your hose. Possibly a bad pump?
Thx for sharing I was looking
No problem
Can I ask a question? What is the highest measurement that the spray tip can be adjusted off the ground?
It's about 20.5 inches.
@@btshomeditionthat's disappointing. Teejet recommends that you use a 1:1 ratio of height to distance with their 110 degree fan nozzles. If you want to use the wheel marks as your spacing guides (which is about 26") then you would want your nozzle tip to be 26" above the ground. I wonder how hard it would be to modify this? Like to mount the nozzle head above the clamp that holds the vertical bar?
Thanks for the video man, now I know how to put it together when arrives tomorrow, you are the only one
I am not iimpressed with your video.
To connect the on/ off swiitch I am at a loss how u connect the connectors. I had to leave it because the sun went down. I will resume after work tomorrow . This is a lousy video. I know this is voluntary but if you are going to do something do it right with no rush.
Sorry this video didn't meet your expectations. I will keep that in mind for future videos.
@@btshomedition I know I have been harsh with you brother man but the sections that is hard to see like the placement of the on/off switch needs to be highlighted in the future. I will resume tomorrow and let you know. I am just going to remove the handles and reinstall the switch then reinstall the handles.
@@btshomedition ok let me apologize for been harsh to the point of perhaps been a bit rude. I only hope u did not take it personally. I was able to finish the installation /config in about an hr. However where did u clamp H8 the loop clamp. I threaded the hose thru it and I am trying to figure out where should I clamp it. I have it loose right now. . Take care
No worries. I understand your frustration. Glad you were able to work through it.
@@btshomedition nice reply with no answer to his question, he didnt deserve an answer from you