OMC Cobra upper oil seals replaced on the boat
Вставка
- Опубліковано 26 лют 2017
- Please see www.sterndrive.info/id207.html for OMC Cobra water pump adaptor parts and tech help.
Video includes the following
• Install water pump adapter seal
• Install seal with Loctite
• Water in the oil
• Water flush kit
• Install flush kit
• Remove oil from upper
• Replace outdrive top lid
• Remove water pump cover
• Remove water pump bolts
• OMC parts required
• OMC tools required
• Tap water pump adapter plate
• Use bottoming tap
• Install pins
• Removing the water pump adaptor
For more information contact order desk or tech service representative (416) 751-7326
Thanks for watching
Need drawings or tech help contact
T.C. Electronics/Marine
www.sterndrive.info ( 416 ) 751-7326
Glad to know about the double seal mod, and you saved me a headache with the tip about hose water pressure when flushing or testing the engine on my new boat. My driveway hose is at street pressure which is 110 psi.
Glad to see you esed air at
Nice Job, Wayne Coll, This really helped me after my W/p/housing replacement, I had no idea that there was a double seal available.....
Great Wayne. So helpful!
thank you boy for the info it really help me, really appreciate
Thanks for sharing
how do you test to make sure these are the seals
Wait!!!! The other seal at the end of the shaft I have oil leaking out of it. How do I remove that seal?
Is the second added seal the same as the one on the inside?
The upper oil drain plug/cap is stripped...how would one correct this problem with simplicity..it is an Aphla One stern drive.
I have a question I have the same unit and are getting some gear oil leaking out from the 2 small holes on the right side of the unit if your standing right behind it . Any help would be greatly appreciated
Hi Wayne I have 1987 omc 800 v6 4.3 and the gear lube on lower unit is coming out with the water do you a have a video with that type of issue the model on sterndrive is 984210 lower unit pour water whe intake drain plug at the bottom
Where an I order the new plate and seal
In tool and die we call those threads your putting in jack bolt holes
Can you make me one?
Where is this on the boat? Is this in the head? I’m confused
You are wrong!