You can get the part directly from Tesla at a local service center, they should have most things in stock. Look on the Tesla.EPC site to find part number.
Need Advice: model 3 makes a humming noise around 42 mph from front wheel assembly, cabin is filled with noise that is not audible at low speeds.. it is usually louder at constant speed or gradually slowing down with regen applied. Tesla's service center has zero clue what that is. Any thoughts? thnx
Same here after diagnosis they told me I needed to replace the knuckle and also lateral link will need to be installed since there was no link installed on vehicle. The compliance link, lateral link, and toe link will need to be replace
Love your vidoes but i need sincere help, i picked up 2020 model y from auction which did not come with key. i got the salavged parts ( door, seat airbag ) replaced except the pyro fuse ( which i just ordered and waiting). I booked appointment w/ tesla to change ownership but they are not doing it as it is salvage car. they are not making new key as well . im stuck without key and car siting for over a year now. please guide me how should i proceed ? I reached out to previous owner he does not have key although he tranferred phone access to me , so i have the app now but it does not start w/ app or open or close it is always asking for a physical key to link the phone . Any help would be greatly appreciated.
Tesla will make a key for your car, they are just lazy. Schedule mobile service to add a key for you it's $80. Make sure you verify the Pyro fuse is legit Tesla part and not modified or tampered with. It should ohm out across the buss bar lugs on fuse. You do have physical access with app under controls and enable remote start driving. You won't be able to do so until the fuse is replaced. The phone can't be used as a Bluetooth key until its paired with a physical key.
Bro I was trying to make a turn at a higher speed in my M3LR & smacked a curb and broke my rim but that’s nothing , . It’s the front passenger side and instead of wheel being centered it got pushed back so when it’s straight the wheel is practically rubbing on wheel well and when I turn to the left (the direction was going when it the curb) it rubs hella bad, not sure if it’s just rhe lower control arm or hub or man I just need help geez 😭😭
Hi, I am buildind a two motor monster truck with the Tesla model 3 components and calculating the torques.... Could you please measure for me the diameter and the lenght of the 29 piece spline on the cv axle from the motor side, and the smallest diameter of the whole axle? Thank you very much, Peter
You should join my Discord group we specialize in rebuilding and repairing Tesla and have over 150 members. I am also going to be starting a conversion project soon and we might be able to help each other out! Here is the link: discord.gg/KEYebwhXHx
Replacing the knuckle after impact is the smartest move
Thanks for the video brother.
I think I need to order bracket, but can't find schematics or part number nor do I know where to order it from. Awesome, thanks, Fernando
You can get the part directly from Tesla at a local service center, they should have most things in stock.
Look on the Tesla.EPC site to find part number.
Need Advice: model 3 makes a humming noise around 42 mph from front wheel assembly, cabin is filled with noise that is not audible at low speeds.. it is usually louder at constant speed or gradually slowing down with regen applied. Tesla's service center has zero clue what that is. Any thoughts? thnx
Any history on the car?
How old, miles, any damage to that area?
Could be bearings, if AWD possibly axle...
Same here after diagnosis they told me I needed to replace the knuckle and also lateral link will need to be installed since there was no link installed on vehicle. The compliance link, lateral link, and toe link will need to be replace
@@TeslaRebuilders 7Ok , 2018 early model 3 RWD version. No accident
@@stevencraig7297 how much they quoted you? and did you get it done?
@@svm2020 for all of that around 3800 but the humming is definitely the knuckle
Which ratchet do u use ?
Love your vidoes but i need sincere help, i picked up 2020 model y from auction which did not come with key. i got the salavged parts ( door, seat airbag ) replaced except the pyro fuse ( which i just ordered and waiting). I booked appointment w/ tesla to change ownership but they are not doing it as it is salvage car. they are not making new key as well . im stuck without key and car siting for over a year now. please guide me how should i proceed ? I reached out to previous owner he does not have key although he tranferred phone access to me , so i have the app now but it does not start w/ app or open or close it is always asking for a physical key to link the phone . Any help would be greatly appreciated.
Tesla will make a key for your car, they are just lazy. Schedule mobile service to add a key for you it's $80. Make sure you verify the Pyro fuse is legit Tesla part and not modified or tampered with. It should ohm out across the buss bar lugs on fuse.
You do have physical access with app under controls and enable remote start driving. You won't be able to do so until the fuse is replaced. The phone can't be used as a Bluetooth key until its paired with a physical key.
Bro I was trying to make a turn at a higher speed in my M3LR & smacked a curb and broke my rim but that’s nothing , . It’s the front passenger side and instead of wheel being centered it got pushed back so when it’s straight the wheel is practically rubbing on wheel well and when I turn to the left (the direction was going when it the curb) it rubs hella bad, not sure if it’s just rhe lower control arm or hub or man I just need help geez 😭😭
Sure dude join our Discord community and we can help you figure it out.
discord.com/invite/N8M6Gd29
Did it fix the problem?
Yes it was the bad bearing, but now I realize the shock is bad also. Have to remove and replace it next.
@@TeslaRebuilders you've got golden hands. Keep it up bro
I have a few question how do I get ahold of you ?
Hi, I am buildind a two motor monster truck with the Tesla model 3 components and calculating the torques.... Could you please measure for me the diameter and the lenght of the 29 piece spline on the cv axle from the motor side, and the smallest diameter of the whole axle? Thank you very much, Peter
You should join my Discord group we specialize in rebuilding and repairing Tesla and have over 150 members. I am also going to be starting a conversion project soon and we might be able to help each other out!
Here is the link: discord.gg/KEYebwhXHx
U need to set it on jack stand , floor jack alone is not enough
Yea I put blocks under them now as Jack stands are too high really.
I have some 6x6 wood blocks that work great, thanks for the concern.
3.6k nzd at tesla