Electric Hot Air Gun 110V/220V Heat Gun 300W review
Вставка
- Опубліковано 16 кві 2019
- Electric Hot Air Gun 110V/220V 300W Heat Gun DIY Review
Purchase link: bit.ly/2UGQg2U
Name: Soft pottery Hot air gun Heat shrinkable sheet setting tool Rubber stamp DIY handmade pottery clay heated clay hair dryer
Size: length 22.5cm, diameter 4.5cm
Power: 220V EU Plug/ 110V US Plug
Rated power: 300W
Material: plastic case, stainless steel inner air outlet
Thank you.
Subscribe for more future creative project videos.
Subscribe Lahistech Here: bit.ly/2JHtlyc - Наука та технологія
I have one and it actually works very well for what I bought it for which is phone repair. It will heat up a back ( or front) glass enough to remove it.
I can't speak for anything else
I bought one of these came yesterday its fine for heatshrink thats it but can only be run for ten minutes then needs to be switched off to cool down or it will melt.
V9pp0
There is no thermal switch and thermal fuse on the nichrome wire. Nor a current fuse on the input. This is not safe. Be careful everyone.
It's recommended to use no more than 10 minutes continuously by the specifications in it.
You can use this for ic like WTR2965?
I like the way Hooby Electronic India reviews products that are always open to see the components inside😁
Thanks I am not from india Btw.
@@LahisTechLT sorry sir
@@LahisTechLTwhere are u from
Can i have a separate switch for the heating element and just use the blower function??
Try replace with glow plug 12 v.i watch other channel works..gud ist thatch
Todos os vídeos do UA-cam são bons mas o problema esses esses anúncios que atrapalha
Can it make plastic bottles shrink?
Akhirnya, I found what I was looking for, thank you, I was looking for this to open the Honda Vario motorcycle headlight head, but it doesn't seem strong enough to melt the glue because the glue on the lamp head is very strong.
Use a haidryer
jadinya gimana bang? bisa ga buat buka reflektor motor?
Seems useful I've always used hairdryer to heat-up glue and it takes a while
this is kinda cheap so i might buy 1 useful vid:) (not the part where u de-solder 3:40 and try melting lead lol 2:20)
110V~220V/300W!在台灣稱之熱風槍!
Almost bought one...
if you can add a thermo-couple to prevent the melting point of the plastic body, will be great, i liked the content of this videos, thank you for sharing.
Is that an asbestos heating element? If so, that seems like a major hazard.
It can be useful for removing lcd smart phones and also for 8 pins ic even mor pins by the way is good for smd components ofcourse if you make the outdoor of heating smsller it means more tigh which can make the heating stronger for removing components!!!
Like a nozzle perhaps... 😀... Focus it to a narrower point... 😁
looks
How to buy green megarment seat in this video thembeil
It's avilable on Ebay, Banggood, etc ua-cam.com/video/SEojo38w0rA/v-deo.html
I was wondering was socket did you use and were did you purchase it from?
They are on eBay for around 12 to 15 dollars
can it might be use in removing smart phone LCD?
Yes
can it remove charging pins
@@jctechvlog yes it's My Question ?
@@jctechvlognope
Link open nhi ho rha
Sir price
Ok
इसका प्राइस क्या है
🎉🎉🎉
I bet I can rework this.... 😳
Price
What modification did you make that increased his temperature? I stopped the video and came back and couldn't see it. Thanks.
I didn't do any modification.
jika PCB sederhana tidak bisa dibongkar itu sampah
Mak sudnya apa d bongkar d pasang lagi
Dia lg review brang nya
Where I can get coil..?
JITu. Ok
Holy shit that thing is so cheaply made and the outside cover hides it well
Why dont you use your own voice to communicate?
SAYAN DALAL this way is better.
Because his videos will have greater range. Everyone from all languages will be able to do his projects.
Its not successful item failed 😂
It's bad product
Ok
Ok