Mini Heat Shrink Heat Gun!
Вставка
- Опубліковано 27 сер 2024
- Another "must have" inexpensive, highly useful, compact tool for electronics hobbyists and technicians, as well as automotive technicians. There are many other great uses for this mini heat gun. Enjoy the video!
Link to Heat gun:(LOWEST price online!)
110V: bit.ly/2gE8zkB
220V: bit.ly/2fJThWF
*Try these money saving coupon codes: affiliate6 or aff7off or f8aaf1 or 781622 or 5719ed or elec* or ask if other codes are available!
(Purchases help support my channel, which is absolutely necessary)
**Link to the Mustool DMM shown in this video:
• Great DMM(Digital Mult...
**For GREAT deals(Usually cheaper than EBAY) on electronics, drones, automotive tools, household items, phone accessories, locksmith tools, & much more, please visit the link below. (Your purchase supports my channel!)
All Items: bit.ly/2cgYr14
Flash Deals: bit.ly/2cb6CZB
*Be sure to use one of the above money saving coupon codes!*
**This channel is NOT being fully funded with video ads alone. As a result, I must also rely on viewer donations to ensure more quality content is produced well into the future. All donations, big or small, would be greatly appreciated. Please visit the link below. Thank you!
www.patreon.co...
Thanks For Watching!
**If you enjoy watching my videos, then be sure to SUBSCRIBE, POST LINKS to my videos on other websites & blogs, rate "THUMBS UP", and check out my video playlists. Doing so helps to ensure that many more videos will be uploaded to my YT channel in the future. (Views are absolutely essential to ensure this channel remains in an active state)**
Thanks for this. I was looking everywhere for the temperature rating!
Glad I could help! Be sure to look over my video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites. Thanks
ua-cam.com/users/electronicsnmoreplaylists
This comes in handy for those days when the sack sweat gets bad. It's quick, easy, and you never have to worry about getting too close to the fan blades. If you've never taken a fan blade to the nuts let me tell you it stings.
Just got the same exact type and it works well. Thanks for this review.
Great to hear! Be sure to look over my extensive video playlists below for many other videos of interest to you(especially my product reviews), use supplied Amazon/Banggood links to support my channel when making purchases(No added cost to you), and share links to my videos with many others on social networking sites. Thank you
ua-cam.com/users/electronicsnmoreplaylists
Does it melt plastic as well?
Is the heat gun powerful enough to melt solder
Thanks! I had forgotten that I had an Embossing Heat Tool in storage. Electronic Heat Tool - UHCIDA of America, AC 120V, 60HZ, 380W. I'm pretty sure I paid more for it than the model you've posted. It ought to work perfectly. Various nozzles might be a great option.
Vacuum forming? I wish! I'd really like to get my hands on a decent one. One that truly works... for my RC aircraft (small to large parts).
I should also build myself some custom nozzles for my heatguns. Thanks!
4FunRC They're easy to make. I made a small unit for dental retainers and other small parts which works perfectly.
Gonna try to use this with a temperature controller for heating a mushroom fruiting chamber.
Got mine in the mail today! Looks (and works) great. I'll put it at the local makerspace for good use. Thanks!
Torsan1977 Great to hear!
I must be a silly dude? I am using my solder iron to heat up the shrink tube. And in some cases I light up a candle and use that heat (sideways, to not burn anything). Both work very well and I did not buy any extra tools.
I've done that too. This tool makes it very easy. Do all your soldering, apply the heat shrink to all your connections, then use this inexpensive tool to shrink everything up.
Thanks But i think the heat so low to make real soldering in mainboard
You are great👏👏
Will this melt solder? Like self soldering wire connectors?
I wonder If i can use this to mass remove old solder resistors, capacitors etc on board where parts are good but board bad. will it work to mass desolder and have it just drop out? inquiring minds. thxz
This is one of the good product for small work
It sure is. Be sure to use the coupon code if you decide to buy one at the link in the video description area. Thank!
Doesn't seem too loud. How loud would you say it is?
Well done bro.. liked.. is your mini heat gun powerful enough to melt soldering wire contacts and for desoldering?
I like the small size, it would make it easier to get in confined areas. The larger heat guns can be awkward. And the price is cheap enough.
If it wasn't as compact as it is, I would never have bought one because I already have a large heat gun. Thanks for watching
Excellent video!!! Thank you so very much!!!
You're very welcome!
You can solder with the heat gun as well.
Not sure if it gets hot enough like a hot air reflow gun.
Nice tool for that sort of work. It's one of those unique tools out there. You do have to have a need for this product as most multifunction soldering stations will handle this task. Nice tool for automotive work.
You're not going to want to drag a bulky hot air station under the dashboard of a vehicle or boat. I have one, and I sure won't. I don't see any reason not to buy one for a measly 11 + dollars.
I missed the price somehow in the video. Yes it's worth it.
$11? That's even better! I was thinking they were $14 (which is good already).
Burfurd64 coupon code makes it $11.55 shipped
Oh, I see. Thanks.
cool and thank you.
You're welcome!
That distinctive NY / NJ accent.
Long Island to be exact. :-) Moved away 27 years ago.
Knew it! Haha good on u man.
shower head - heating element- can be used for repairs on this unit
very informative.... thanks for sharing this video
Useful tool, wonder why there's a bridge rectifier on the universal motor but no R.F. suppressor cap?. J.
No filter cap, and it works just fine.
Just what i'm needing! haha thanks again! And of course subbed, great channel :o)
You're welcome!
Is this powerfull enough to melt the new heat schrink with Solder type connectors?
Thumbs up...just ordered one
ymmmmij Great to hear! Be sure to check out my product review playlist and share. Thanks!
Can you attach different nozzles?
Sweet find!
This item I actually bought, but it worked so well, that I had to make a video showing it. Usually I don't take the time to make a video for "cheap" items/gadgets. I was able to get the price reduced for my viewers. Glad you liked the video!
Sorry I did not see: where did you get this one?
Hi friend, do you think that it's suitable for that type of heat shrink that comes with a solder ball in the middle?
Can this heat gun remove stress marks on plastic?
Can this melt glue on some electronic devices?
Can we use this for soldering or desoldering SMD?
No, not hot enough. Refer to my other video below. Thank you!
ua-cam.com/video/YHc3f0nPEFo/v-deo.html
@@electronicsNmore Thank you for the prompt response. Really enjoyed watching the video you referred to.
This heat gun never worked for my phone. It doesn't get hot enough to melt the adhesive.
It should get hot enough, but it's not the right tool for the job.
@@electronicsNmore is not, I almost broke a glass back using this heat gun because it cooled to fast.
@@marcelfernandezromero8905 You're using the wrong tool!
@@electronicsNmore yeah the wrong heat gun. The prying tool was plastic.
Very nice review. As a long-time user of matches and lighters to do heat shrink and tired of the soot, this small sized tool looks perfect. Just ordered one using your link. Thanks for sharing your knowledge.
Thanks for your support Jim!
could melt solder the hot air?
No, the unit does not get hot enough. The unit below can melt solder. Use one of the coupon codes in the video description area. Thanks for watching!
bit.ly/2A8fldk
whether it is a good option for downloading the screen, ie, points to a tablet ?
Aleksandar Bancilov I don't understand you.
However this. to remove the broken glass from the tablet is necessary to heat the glass.
@@bancilov83 You cannot download a screen. Impossible. If you meant heating the glass to remove the adhesive, then it could work. However a proper temperature-regulated heat gun would be best suited for it, otherwise you'll cook the LCD controller too.
this doesnt get hot enough to do soldering jobs, needed to reflow chip this doesnt cut it
has this helped you? would you recommend it for 5-6 euros?
Hi friend, do you think that it's possible to convert it to 12v DC?
Hi! I do some small resin work and needing a gun to just blast the air bubbles out. I dont really wanna buy the bulky sized heat guns, so would you recommend it for that?
Ideal for that, just hold it at the right distance from the surface.
Where were you before I bought a hot air station? Main use I have for it is shrinking such tubes :) This would've done the job much cheaper. Quite a nice solution if just need to shrink the tubes and other lo-temp uses.
However, the combined station (iron+ hot air gun) was just a little bit more expensive, so I decided to buy the extra frill :)
I have a very nice hot air reflow station as well(shown on my channel), but this tool is more "portable". It's faster to use.
Yeah, I know you have, I saw that video. The small one is sure great for lugging around
if i want to open headlight possible i can use this ?
Exactly what I was looking for. The bigger heat guns draw too much current and matches are messy.
Yes, these units are great.
Will it work in opening a cellphone?
I've used it to soften adhesive.
Can I use it for shrink Wrap?
Yes
Is this good to separate display from unibody metal phone ? I'm having a hard time separating lcd from body...
Yes, a heat gun can help.
Hi Doug. May get one,looks like a useful addition to the bench.
Merry Christmas to you and yours.
Bobby
Merry Christmas to you too! :-)
thank you sir.
You're welcome!
Just got one of these today, and it works well.
I would have liked for there to be a cooling down (fan on but no heat) option, but hey! it was cheap ;-
BTW, the clip stand on yours seems to be mounted back-to-front.
Yes, you can't really complain for the price. :-)
Hey, I'm looking for one of these. Can you tell me some about the durability and the time you've been using it?
THANKS!
Small, compact, cool. Thank you for sharing
You're welcome!
Would this work for paracord?
Does it get hot enough to melt solder? For desoldering pcb's and stuff.
No, you need a hot air rework gun.
Will this be enough to melt additives covering the inside of mobile phone LCDs?
It may work, but not as good as a heat gun that can go well above 300F.
@@electronicsNmore thanks
will this work for the heat shrink solder sleeves?, like is it hot enough
Yes
I wish you had timed the zero to full heat output warm-up time but I think it seems to be about 15 seconds.
It gets hot very fast.
@@electronicsNmore Cool...
At that low price, you could attach multiple units to a glove and be "Edward Heater Hands"! ;)
Seriously though, for those who haven't checked the source yet, it's only $14 (110v).
Update: $11.55 with the coupon (shipped).
Burfurd9000 I got mine for 9.16
Can it be use on melting adhesive on glass back phones?
Should get hot enough. Look up the temp required online. See how hot specially designed units get.
Is it normal for this unit to smoke for after only being on for a 1 to 3 minutes, after it is cut off?
No. Inspect it carefully.
is that can be use for removing electronic parts on pcb board?
No, you need one of what's shown in my other video below. Thanks for watching!
ua-cam.com/video/YHc3f0nPEFo/v-deo.html
can we use it for soldering purposes?
No.
Looks like you could use this to solder SMD's?
No, not hot enough, and the nozzle is kinda big. :-)
Will this help separate broken glass phone display
Should definitely get hot enough, just don't make it too hot.
I realize that this is an older video so possibly the individual who made it no longer checks for questions, but I'll ask anyway. I build model kits and occasionally a part might be warped or misshapen, would this produce enough heat to soften the plastic therefore allowing me to reshape the part as needed?
Yes
What did u apply the rosin core solder with and which one did you use because it's not in the links below
Hi there. Visit the link below. Use any small, semi-firm brush. Thanks for watching!
bit.ly/35KEbgN
(Affiliate Link)
can this remove lcd in phone??
oh my hat. thats elcheapo. thanxs.
Yes, very inexpensive.
Yes, very inexpensive.
Can u use it for customizing shoes?
It can be used for many projects that require high levels of heat in a smaller area.
Hi so can we use r
To desolder things
No
Ok
Can I modify it so it becomes hotter
Can I use it to wrap or vinyl stickering on my whole bike?...
Should work, just be careful that you don't get too close to the plastic.
@@electronicsNmore thank you😍😍
was going to get it but I got the actual heat gun because ive read comments in Amazon that Ihis blew up
Nonsense. I use mine all the time.
Will this work to desolder micro USB port of a smartphone?
No. You need a hot air rework station like I show on my channel.
how did u remove the red plastic cover?
I think there's a screw. I have it in storage so I can't look.
Can I use it for vinyl wrap on small detailed?
Maybe for small areas. Don't hold the nozzle too close.
nice .........
Can it be used to remove the smartphone LCD??
I'm sure you could use it, but you'd need to be very careful that the phone doesn't get too hot. I'd go with a temperature controlled unit.
can i use it to heat up pvc tubes or is it too small for that job?!
1/2" & 3/4" no problem, possibly 1" as well. Thanks for watching!
electronicsNmore cool ty!!
Weird, in another video it was around 300 C max, in here it is 300 F?
I just double checked. 315F is max.
the element would last longer if you had a switch goes fron heat to fan to cool element
No, the resistive element(wire) is just fine. It never gets that hot, and as soon as the power switch is turned off, it cools down fairly quickly. Thanks for watching
Well, yes, but you can't do this in that gun. The power for the low-voltage (!) fan is obtained by tapping across a short section of the heater. Essentially, it's a resistive divider.
Cool! I was just talking to a friend last week about that it would be nice to have a small heat gun instead of the huge one I have. But I have never seen one before. This is just what I was thinking about!
Are you sure the coupon code works for the 230V version aswell? It says invalid code when I try to check out.
Yes, just tested it. 220V version is only $11.55.
Ahh! there it worked! Copying it must have added a space or something. Happy to support you!
Torsan1977
Thank you very much for your support! Hundreds of people on Ebay have paid as much as $19.99.
can i use it straight 10 minutes?
Yes
Will it work for soldering?
No
ok, thanks
Can you melt a lead with this heat gun?
No
Would this melt the solder on ps4 hdmi port so I can solder a new one on
I don't think it gets hot enough.
Work with soldering paste
Can you use this for soldering and removing chips off boards? Is it warm enough?
Michael M Possibly, but for what you want, refer to the link in the video description area. At that website search using the term "hot air".
Can this melt solder?
No. You need a hot air rework station. I have a video showing one in action.
electronicsNmore ok thank you buddy I’ll go ahead and watch it
How much are they worth, its a lot more compact than mine.
I had Banggood price it very low. Only $11.55 shipped, AND you're actually supporting my work on this channel. :-)
thanks for this ...
where's the coupon and the link?
Hello. Right below the video player window. Click "show more" or the down arrow. :-) Thanks for watching!
Kate money air hitter gun
Its only 3$ here in our country 😁
Where is this?
Is it also shipped to Asia?
Yes
@@electronicsNmore Should I prefer 110V or 220V version? Thanks
@@tropicaldimitri7374 If any of your appliances that plug into the wall use 110 or 220 volts, check the BACK of the unit (turn it around). That is where you'll find the information.
Can you recommend a good adhesive to use within the heat shrink tubing IF you do NOT have adhesive-lined/marine heat shrink tubing handy? Something that won't promote corrosion or damage to the wire or insulation?
Silicone or E-6000
Thanks!
I could use a air dryer for that
LOL. No. A hair dryer's heat output is way under 200F, more like 125 -150F.
Funde estaño
Sorry mate, these things are junk! The cord is really short so you either need to extend it or use an extension cable, it struggles with anything bigger than small heatshrink and mine only lasted a few months before going bang and tripping the breaker.
I'm not even sure they would pass any electrical safety checks.
I'm now looking for another heat gun but something with a bit more quality. Unfortunately buy cheap and buy twice in this case is correct.
Mine still going strong, as a matter of fact, you can see it in my videos being used.
it did not do anything
It sure did.
not for electronic welding
No. You need a hot air reflow gun, like I show in another video.
ua-cam.com/video/YHc3f0nPEFo/v-deo.html
@@electronicsNmore Thanks
Can I dry my hair with this? I have a small head.....
If you don't mind the smell of burning hair or skin, sure. LOL
Hmmm... temperature looks to be around... 8888. Ok.
I see a clearly visible readout. You need a better display.
@@electronicsNmore
I was just trying to be funny.
I should have mentioned that I appreciated your video, and, based on it, purchased one of these for all my heat-shrinking needs.
(When your hand is in-frame, the camera's auto-exposure stops down and makes it more difficult to make out the numbers. When you move your hand away, the numbers become much clearer.)