Hi thank you for your videos, im having a problem with my 2014 bmw 328d there is a clicking in the CD port ive ejected a CD out of it however now bluetooth and navigation will not work. I can accept calls on bluetooth but can't send the call signal from the idrive. Navigationa stays on the green loading screen and my media says the radio is always checking for a CD. The only things that seem to work are Radio and AUX.
Hey friend Great vid! I did it and removed the stuck dvd from the nav of my E60 M5. After plugging everything back and assembling it, vents aren’t responding to changes on the idrive. Air blows only to the feet. Everything else works but the vents are not to any change. Any tips? Power reset maybe by disconnecting the battery?
@@LMAutoRepairs thanks for responding. No, they are not grayed out. I can change them to my hearts desire. I’ll plug ista and run diagnostics. Thanks bro
Indeed strange... Check the basics... fuses etc... Check live data, and actuate the flaps... though the LIN bus fault with all the motors might indicate a common issue to all...
@@LMAutoRepairs after hours of searching the web I found one article that references my issue. The Climate Control Module is the culprit. Apparently it’s an issue and it’s not known why it goes bad. Maybe it was about to go bad and my tinkering accelerated it. Any how, I found one online and ordered it.
Hi thanks for helping us by your videos.I have one question, how can I clean crash data in srs control modul on toyota cars,which kind of tools I need to have and how I can use it,and do you have any video about that.Thanks a lot.
Hi I some videos coming up soon... but on Patreon first... Most of that work is done on the bench with programmers... some cars can be done through OBD, but not all... Thank you for watching and for your comment!
Hi LM, i got a citroen C4 grand picasso 2015. My local garage changed the clutch 2 days ago, but now they can not program the gear box as they can’t connect the to ECU. I would like to drop the car to you if you have a time. I am in NW london. Thank you
Hi I am quite busy right now... plus, is not like if I have a garage or anything like that... I do this as a part time... Have you checked fuses etc? Which tool are they using to program it? Thank you for watching!
Hello LM, sorry for the late replay My car running fine when came to garage when ask the mechanic to change the clutch, after they changed the clutch no communication with the ECU. is there is any special procedures to do it before the gear clutch is open. Thank you
@@AbdirisaqGuled Hi I never done one, so not really sure... But try to disconnect the battery... leave it off for a few minutes, connect it back on and try the procedure again...
@LM Thank you bro, we just done the programming just now, we disconnected the battery about ten minutes, then after few tries we success at last. Thank you. We watched one of your videos that you have mentioned the battery must not go lower. And that helps us. Once again i am really thanking you.
Thanks man, this helped for "Business CD" radio from 2004!
☺️
👍👍👍
LM Auto: could still prevent the radio from working? Because CD inside there spinning and the navigation screen display not coming on
Hi thank you for your videos, im having a problem with my 2014 bmw 328d there is a clicking in the CD port ive ejected a CD out of it however now bluetooth and navigation will not work. I can accept calls on bluetooth but can't send the call signal from the idrive. Navigationa stays on the green loading screen and my media says the radio is always checking for a CD. The only things that seem to work are Radio and AUX.
I have the same problem, did you solve the problem?
Is all this equipment still hook up to dash board while you are repairing it thats how you knew it was working
Hi any tips or reason why mines not move when turning the cog
Hey friend
Great vid!
I did it and removed the stuck dvd from the nav of my E60 M5. After plugging everything back and assembling it, vents aren’t responding to changes on the idrive. Air blows only to the feet. Everything else works but the vents are not to any change. Any tips? Power reset maybe by disconnecting the battery?
Possibly...
Try that...
The i-drive options for the vents are not grayed out are they?
👍👍👍
@@LMAutoRepairs thanks for responding. No, they are not grayed out. I can change them to my hearts desire. I’ll plug ista and run diagnostics. Thanks bro
No luck mate. Ista gives me: 00E706 IHKA LIN bus fault. Air distribution flap motors. I don’t get it. Everything was working fine.
Indeed strange...
Check the basics... fuses etc...
Check live data, and actuate the flaps... though the LIN bus fault with all the motors might indicate a common issue to all...
@@LMAutoRepairs after hours of searching the web I found one article that references my issue. The Climate Control Module is the culprit. Apparently it’s an issue and it’s not known why it goes bad. Maybe it was about to go bad and my tinkering accelerated it. Any how, I found one online and ordered it.
Hi thanks for helping us by your videos.I have one question, how can I clean crash data in srs control modul on toyota cars,which kind of tools I need to have and how I can use it,and do you have any video about that.Thanks a lot.
Hi
I some videos coming up soon... but on Patreon first...
Most of that work is done on the bench with programmers... some cars can be done through OBD, but not all...
Thank you for watching and for your comment!
Nice and quiet now 🤫 😊, thanks for sharing it Luis 👍👍👍
Indeed Igor!
Thank you for watching and for your comment!
Awesome great help
😊
👍👍👍
Hi LM, i got a citroen C4 grand picasso 2015. My local garage changed the clutch 2 days ago, but now they can not program the gear box as they can’t connect the to ECU.
I would like to drop the car to you if you have a time. I am in NW london. Thank you
Hi
I am quite busy right now... plus, is not like if I have a garage or anything like that... I do this as a part time...
Have you checked fuses etc?
Which tool are they using to program it?
Thank you for watching!
Hello LM, sorry for the late replay
My car running fine when came to garage when ask the mechanic to change the clutch, after they changed the clutch no communication with the ECU. is there is any special procedures to do it before the gear clutch is open. Thank you
@@AbdirisaqGuled
Hi
I never done one, so not really sure...
But try to disconnect the battery... leave it off for a few minutes, connect it back on and try the procedure again...
@LM
Thank you bro, we just done the programming just now, we disconnected the battery about ten minutes, then after few tries we success at last. Thank you.
We watched one of your videos that you have mentioned the battery must not go lower. And that helps us.
Once again i am really thanking you.
@@AbdirisaqGuled
That's great news!
Well done!
👏👏👏👏
Lol
Thanks!
nice job. thanx
Thanks!
👍👍👍
Good job Luis! 👍☺️
Thanks!
For watching and for your comment Niamh!
👍👍👍
That's a good tip, thanks.
Thanks!
👍👍👍
Does the single cd control the idrive as mine is not working I’ve got no radio no sat nav no air con
Hi
Yes... The mask has the same functionality as the ccc... or I mean, it works on the same principle...
Thank you for watching and for your comment!
drive unavailbe error on mercedes w204, i will do the same process?as i know there arent any stucked cds
Hi
That seems a different issue...
Have you scanned the unit, see if has any codes?
Thank you for watching!
hello.there arent any fault codes on the unit.
@@panayiotistsivitanos
Hi
You might have a faulty drive then...
yes thats possible
Time for a new pair of jeans man.
😂😂😂😂😂
As well...
Thank you for watching!
👍👍👍
😀
Thanks!
👍👍👍
You are a professional...
@@SHAKH700 👍