I have a 330i and I either have a blank screen that flashes once in a while, or just the BMW logo stuck, and maybe one out of every 20 or so times it just works normally. It's the middle of the night right now, but I'm going to try this tomorrow. I have a CCC system like the one in the video with the cd and dvd slots. I hope this works, I drive a lot for work and having no music is annoying.
Yup, this should work, if it does not it is the motherboard soldering of the CCC. Please consider subscribing to my UA-cam Channel for free if you haven't already to show your support. Yup music is a must, backup music is the sound of the N52.
@@DocMackGarage No luck, it didn't change anything. Was stuck on the BMW logo, did the same thing as you did in the video and the logo went away and came back, but stayed stuck. Tried many times and couldn't get anything more than a stuck logo or a blank screen that would flash white once in a while. So frustrating.
I’ve been noticing that the monitor is not bright on very cold mornings (20°) and will brighten up after a couple of starts, and as it warms up. Is this standard, or will this reset fix this issue too? I’ll give it a try and let you know.
@sshale85 it is worth a try but there is a chance some moisture is getting into the fuse box causing that as the drain channels might be frozen and the time. Please consider subscribing to my UA-cam Channel for free if you haven't already to show your support
@tzamball8301 You are most welcome, please consider subscribing to my UA-cam Channel for free if you haven't already to show your support. I would appreciate it.
I take you mean I Drive as Xdrive means AWD. Yours is an NBT system. . You will need to hold down the volume button for 25 seconds and that should reboot it. Please consider subscribing to my UA-cam Channel for free if you haven't already to show your support. Additionally if you would like there is a thanks button on the video where you can donate.
You are most welcome. Please consider subscribing to my UA-cam Channel for free if you haven't already to show your support. I will have more videos out soon .
Thank you for the tip, I have a 2010 550i CIC system the control works scrolling but not selecting/ pressing down. I have replaced this one time before, it was working after I did. Now it happened again and I rebooted it nothing changed. Any advice ?
How would this work for 2008 750i yesterday it got stuck now it says change menu:push disable display:press the ac controls show at the bottom it boots to menu then the screen goes blank with those options on the right side of the screen my idrive controller has no resistance when i twist and when i click menu the screen doesn't respond nor when i press down on the controller idk what happened is there a way to reset this please let me know. 2008 bmw 750i e65
@StudioSasha Hi there, It is a bit more complex and requires some coding in CAPPL. Please consider subscribing to my UA-cam Channel for free if you haven't already to show your support, I will have more BMW videos which may be of help .
what about when screen works and all buttons works but still center roller or the menu button doesnt work and i have checked that all the electric wires are connected back at the ccc?
My CCC system shows the menu with the arrows but not displaying any words close to the arrows, like climate, entertainment... I did hard reset the words appear but they disappear after awhile. I think the problem it is the resolution... because if I search through menu it is too big and I cannot distinguish anything... Do you have any idea what can I do? I have a 2009 X6 E 71. Thanks
Hi, the instructions I provided worked . If it keeps disappearing, pull the fuse for the CCC system for 1 day then plug it back in. Some settings might change. Please remember to subscribe to my UA-cam Channel for free if you haven't already
My idrive is a ccc. It has stoped showing My parking sensors . The bong works intermittently but no picture anymore . Any ideas. I've tried the 3button trick . Or do you know what fuse can I check.
@RiskysHome This will work for the CCC unit , I also mentioned how to do for CIC. If you have a soldering issue on the CIC it won't work. Please consider subscribing to my UA-cam Channel for free if you haven't already to show your support
Hi, try holding down the volume button only for 30 seconds. Please consider subscribing to my UA-cam Channel for free if you haven't already to show your support.
Hi, i have a 2008 650i and my idrive screen shows the bmw logo and then the screen shuts off and shows the logo again, it keeps doing this on loop. I tried the reboot you showed but it didnt work. Any help? (Love your videos by the way)
@saifshaikh2681 Thank you. Please consider subscribing to my UA-cam Channel for free if you haven't already to show your support . Is yours a CCC or CIC ?
@saifshaikh2681 Thank you, if this does not work , try to get it scanned. It could be an issue with the CCC itself where the soldering has come apart causing that .
What was the issue to start off with. Did you replace the whole controller or just the plastic ? You might have to code it. Also please consider subscribing to my UA-cam Channel for free if you haven't already.
Please help. I’ve replaced my 06 330i e90 CCC unit with one from a 08 335i e90. Everything works I’ve managed to code with NCS expert all buttons on unit work and steering wheel radio idrive functions work as well. BUT my iDrive controller doesn’t work at all. It has no resistance to it so you can easily spin it etc. What do you think the issue is and how do I resolve it? I just ordered a used one off eBay just in case. Thank you.
@Aydoxz Try taking the fuse out for the IDrive CCC and the CID for 1 hr , then plug the fuse back and try again . Also make sure to subscribe to my UA-cam Channel for free if you haven't already.
I have a 2010 Bmw 328i xDrive that has a CIC system turning on flashing BMW then turning off afterwards, in a repeated process and I tried the soft reset which worked one time but the problem came back.
It sounds like the actual CIC unit might be faulty . It was more common on the CCC. You could try pulling the fuse for the CIC then reinsert it back after an hour. Otherwise you may need to recode it. Please consider subscribing to my UA-cam Channel for free if you haven't already.
hi. i have a 2008 520d lci that it has only one area with cd. how can i reset the ccc system? by pressing the power button and the eject doesn't do anything. any advice?
I have this same issue, one cd slot for both dvd and cd, it’s single button ccc I drive on 2008 320i edition m sport touring. The menu button has stopped selecting on press, so it will only scroll 🤷♂️
I have a problem, my ccc stopped working, then I bought another one, I got the second one without a joystick, so I use this one with a static joystick, I have a problem that whatever I scroll with the joystick switches too quickly, more precisely, I can never choose what I want
@@DocMackGarage its CCC i changed the guards responsible for the mechanism also and that didint help but today it fixed itself randomly while driving and started working and now after a cold start it doesnt work just like before
@sim it sounds to me like the ccc system hardware has an issue with the circuit board soldering . Please consider subscribing to my UA-cam Channel for free if you haven't already
@sim if it is software then same fix, but of it turns out to be hardware I.e the ccc board fault, it will require replacement and coding which could cost around 1500.
@motown862000 I suspect that language was stored in the module for the idrive. Leave it a few days and see how it goes. Also make sure to subscribe to my UA-cam Channel. I have more bmw videos to come too.
I also have a 04 530i and the screen is stuck on bmw and randomly flickers and shuts off I tried pressing both ejects and the volume but nothing happens I recently bought a xtrons display and it works just no audio cuz car doesn’t have a factory aux so I looked it up and I need to enable aux with the stock display but it doesn’t work and really frustrating Not sure if I have a problem with my oem display but as of now maybe my plans of action are as follows 1: buy and install working oem display 2: enable aux activator 3:install xtrons display Would be nice to not have to buy another oem display just to rip it right out Lmk if any suggestions Would really appreciate it
You are brilliant! This totally worked. THANK YOU!!
You are most welcome. Please consider subscribing to my UA-cam Channel for free if you haven't already to show your support
It work for me. I changed to android device and my i drive knob stop working. I done that and working again. Thank you.
You are most welcome, please consider subscribing to my UA-cam Channel for free if you haven't already to show your support.
I have a 330i and I either have a blank screen that flashes once in a while, or just the BMW logo stuck, and maybe one out of every 20 or so times it just works normally. It's the middle of the night right now, but I'm going to try this tomorrow. I have a CCC system like the one in the video with the cd and dvd slots. I hope this works, I drive a lot for work and having no music is annoying.
Yup, this should work, if it does not it is the motherboard soldering of the CCC. Please consider subscribing to my UA-cam Channel for free if you haven't already to show your support. Yup music is a must, backup music is the sound of the N52.
@@DocMackGarage No luck, it didn't change anything. Was stuck on the BMW logo, did the same thing as you did in the video and the logo went away and came back, but stayed stuck. Tried many times and couldn't get anything more than a stuck logo or a blank screen that would flash white once in a while. So frustrating.
@NoobGaming-pl3bp Try pulling the fuse to tye CCC, then plugging it back, otherwise it could be broken solders.
@@NoobGaming-pl3bpAny luck?
I’ve been noticing that the monitor is not bright on very cold mornings (20°) and will brighten up after a couple of starts, and as it warms up. Is this standard, or will this reset fix this issue too?
I’ll give it a try and let you know.
@sshale85 it is worth a try but there is a chance some moisture is getting into the fuse box causing that as the drain channels might be frozen and the time. Please consider subscribing to my UA-cam Channel for free if you haven't already to show your support
Thank you!!!!! It works!!!
@tzamball8301 You are most welcome, please consider subscribing to my UA-cam Channel for free if you haven't already to show your support. I would appreciate it.
@@DocMackGarage already did, next second it fixed :D
Got a 2014 328i with stuck xdrive showing BMW and nothing else. It has only one slot for DVDs. Please, could you tell me what to do in this case?
I take you mean I Drive as Xdrive means AWD. Yours is an NBT system. . You will need to hold down the volume button for 25 seconds and that should reboot it. Please consider subscribing to my UA-cam Channel for free if you haven't already to show your support. Additionally if you would like there is a thanks button on the video where you can donate.
Thank you very much!!!
Tried it today and it worked, may it continue, fingers crossed!!
🤞
You are most welcome. Please consider subscribing to my UA-cam Channel for free if you haven't already to show your support. I will have more videos out soon .
Thank you for the tip, I have a 2010 550i CIC system the control works scrolling but not selecting/ pressing down. I have replaced this one time before, it was working after I did. Now it happened again and I rebooted it nothing changed. Any advice ?
Hi, you rebooted it the CIC way ?
the exact thing is happening with my 2011 528i, have you figured it out yet?
How would this work for 2008 750i yesterday it got stuck now it says change menu:push disable display:press the ac controls show at the bottom it boots to menu then the screen goes blank with those options on the right side of the screen my idrive controller has no resistance when i twist and when i click menu the screen doesn't respond nor when i press down on the controller idk what happened is there a way to reset this please let me know. 2008 bmw 750i e65
Hi ! Thanks for Video. I have BMW 528i E60 LCI 2010 . I need Disable welcome Gong Complete .. You have any idea ?
@StudioSasha Hi there, It is a bit more complex and requires some coding in CAPPL. Please consider subscribing to my UA-cam Channel for free if you haven't already to show your support, I will have more BMW videos which may be of help .
Is this done with engine on or just power on or non at all. Just curious my dads beemer has the same problems
I did this with the key on, Engine off. Please make sure to subscribe to my UA-cam Channel for free if you haven't already .
Thank you 🙏🏾
You are welcome, please consider subscribing to my UA-cam Channel for free if you haven't already to show your support
what about when screen works and all buttons works but still center roller or the menu button doesnt work and i have checked that all the electric wires are connected back at the ccc?
@@eliaspartanen8441 Did someone replace the IDrive knob ?
My CCC system shows the menu with the arrows but not displaying any words close to the arrows, like climate, entertainment...
I did hard reset the words appear but they disappear after awhile. I think the problem it is the resolution... because if I search through menu it is too big and I cannot distinguish anything... Do you have any idea what can I do? I have a 2009 X6 E 71. Thanks
Hi, the instructions I provided worked . If it keeps disappearing, pull the fuse for the CCC system for 1 day then plug it back in. Some settings might change. Please remember to subscribe to my UA-cam Channel for free if you haven't already
My idrive is a ccc. It has stoped showing
My parking sensors . The bong works intermittently but no picture anymore . Any ideas. I've tried the 3button trick . Or do you know what fuse can I check.
Does the screen show the normal Idrive screen ? If not may be the CID
im stuck on the BMW logo and then it flashes, and again the BMW logo over and over i running to try that out ! anyway Thanks a lot
You are most welcome, please consider subscribing to my UA-cam Channel for free if you haven't already .
this worked for you?
cuz i’m having the same exact problem and can’t figure it out
@RiskysHome This will work for the CCC unit , I also mentioned how to do for CIC. If you have a soldering issue on the CIC it won't work. Please consider subscribing to my UA-cam Channel for free if you haven't already to show your support
My I drive keeps rebooting every minute or so. It is cic 2011 520d. The knob has many buttons near it and only 1 cd slot. What do i do please? :)
Hi, try holding down the volume button only for 30 seconds. Please consider subscribing to my UA-cam Channel for free if you haven't already to show your support.
Hi, i have a 2008 650i and my idrive screen shows the bmw logo and then the screen shuts off and shows the logo again, it keeps doing this on loop. I tried the reboot you showed but it didnt work. Any help? (Love your videos by the way)
@saifshaikh2681 Thank you. Please consider subscribing to my UA-cam Channel for free if you haven't already to show your support . Is yours a CCC or CIC ?
@ already subscribed 🫶🏼 and its a CCC
@saifshaikh2681 Thank you, if this does not work , try to get it scanned. It could be an issue with the CCC itself where the soldering has come apart causing that .
What if the I drive knob is reading that the knob is turning without it turning in your car and you have already replaced the knob
What was the issue to start off with. Did you replace the whole controller or just the plastic ? You might have to code it. Also please consider subscribing to my UA-cam Channel for free if you haven't already.
Please help. I’ve replaced my 06 330i e90 CCC unit with one from a 08 335i e90. Everything works I’ve managed to code with NCS expert all buttons on unit work and steering wheel radio idrive functions work as well. BUT my iDrive controller doesn’t work at all. It has no resistance to it so you can easily spin it etc. What do you think the issue is and how do I resolve it? I just ordered a used one off eBay just in case. Thank you.
Hi, have you tried resetting the IDrive as per the video to see of it makes a difference?
@@DocMackGarage tried it it didn’t do anything.
@@Aydoxz and you replaced it with a CCC and not a CIC ? Cheers
@@DocMackGarage yes it’s a CCC
@Aydoxz Try taking the fuse out for the IDrive CCC and the CID for 1 hr , then plug the fuse back and try again . Also make sure to subscribe to my UA-cam Channel for free if you haven't already.
I have a 2010 Bmw 328i xDrive that has a CIC system turning on flashing BMW then turning off afterwards, in a repeated process and I tried the soft reset which worked one time but the problem came back.
It sounds like the actual CIC unit might be faulty . It was more common on the CCC. You could try pulling the fuse for the CIC then reinsert it back after an hour. Otherwise you may need to recode it. Please consider subscribing to my UA-cam Channel for free if you haven't already.
My screen randomly never came back on today 2006 525i so I’ll try this
That is great, please consider subscribing to my UA-cam Channel for free if you haven't already.
How to reboot for e65 7 series
Which year is that ?
@@DocMackGarage 2005 sir
But how do you reset a 2006 bmw750li idrive
If yours is CCC it should be the same
This doesn’t work for E70 X5 pre LCI
Yours is CCC ? What year?
@@DocMackGarage 2008. I have a DVD player in the glove box
single menu button
@D Jansen your DVD player will have to be next to the other button , if not yours might be a different process. .
Appreciate you my boy
2008 750li e65 i tried this and unplugged the terminals for 30 mins still nothing my ccc doesnt even turn on and my seat controls not working either
Hi, question is is it the CCC or CID which is the issue ?
hi. i have a 2008 520d lci that it has only one area with cd. how can i reset the ccc system? by pressing the power button and the eject doesn't do anything. any advice?
Hi, does your idrive knob have one menu button only, or various buttons ?
It has only the central knob and one menu button, not various buttons
@Makis Sgantsos hi, I mean the one on the centre console near the handbrake / e brake .
@@DocMackGarageyes i speak about the same. Only the center button and one button "menu". Only these are existing there
@@makissgantsos3259 How many eject buttons do you have ?
Thanks
You are welcome, please consider subscribing to my UA-cam channel for free if you haven't already to show your support.
How do I reset my CCC when I only have a single CD inlet so therefore only one eject button? Please help me! My iDrive display has turned upside down
Hi, Can you please advsie the model and year of the car? Are you sure it is CCC and not CIC ?
I have this same issue, one cd slot for both dvd and cd, it’s single button ccc I drive on 2008 320i edition m sport touring. The menu button has stopped selecting on press, so it will only scroll 🤷♂️
Hi! Sorry for the late reply, its a 2009 BMW 1-series 118D. Thank you!
?? Please help🙏🏼
Hello Peeps, can you try holding down. The one button plus volume and see what happens.
I have a problem, my ccc stopped working, then I bought another one, I got the second one without a joystick, so I use this one with a static joystick, I have a problem that whatever I scroll with the joystick switches too quickly, more precisely, I can never choose what I want
Is it a compatible part and did you code the car ? Vo might need to be done too
Didint work on 320D e91 2007 the screen only keeps showing the BMW logo then black screen and then logo again
Is yours CCC or CIC ?
@@DocMackGarage its CCC i changed the guards responsible for the mechanism also and that didint help but today it fixed itself randomly while driving and started working and now after a cold start it doesnt work just like before
@sim it sounds to me like the ccc system hardware has an issue with the circuit board soldering . Please consider subscribing to my UA-cam Channel for free if you haven't already
@@DocMackGarage and what might be the fix for the problem? Because my screen flickers the same way as in your video, is it the same fix or different?
@sim if it is software then same fix, but of it turns out to be hardware I.e the ccc board fault, it will require replacement and coding which could cost around 1500.
Any idea why my idrive is in Dutch language and there's no option to go back to English and most options aren't available?
Did you change your battery or disconnect it before this happened ?
@@DocMackGarage I recently purchased the car it was like that when I bought it I replaced the battery and registered/coded it to the car
@motown862000 I suspect that language was stored in the module for the idrive. Leave it a few days and see how it goes. Also make sure to subscribe to my UA-cam Channel. I have more bmw videos to come too.
my i drive keeps freezing ? one minute my music will be playing next thing it freezes and i can’t move anything ?
Give what I suggested a go and let me know.
Not working for my 2004 530i.. 😭
What symptoms are you experiencing?
My ccc has never worked in my 04 530i I’m actually getting a new car cuz I’m so tired of dealing with it
You could just reball the ccc module pcb board.
This fixes majority of problems.
It's actually easier than most think.
@@zaupdc can you explain more on this? I have a 08 550 screen stays off
@@zaupdc
What do you mean by reball? Can you explain what we can do here?
I also have a 04 530i and the screen is stuck on bmw and randomly flickers and shuts off
I tried pressing both ejects and the volume but nothing happens
I recently bought a xtrons display and it works just no audio cuz car doesn’t have a factory aux so I looked it up and I need to enable aux with the stock display but it doesn’t work and really frustrating
Not sure if I have a problem with my oem display but as of now maybe my plans of action are as follows
1: buy and install working oem display
2: enable aux activator
3:install xtrons display
Would be nice to not have to buy another oem display just to rip it right out
Lmk if any suggestions
Would really appreciate it
Mine doesn’t turn on, no matter what buttons I press it doesn’t boot
Could be your CID
I have a black screen
No bmw logo , just a black screen ? Could be your CID
@@DocMackGarage I disconnected the battery for one hour, after reconnecting batt, idrive working, thanks
@SamsosDen You are welcome, please consider subscribing to my UA-cam Channel for free if you haven't already to show your support.
@@DocMackGarage subscribed
Didn’t work for me was exactly the same stuck BMW sign
What model do you have ?