I just purchased the klein 11-1 impact ratcheting screwdriver couple days ago and I love it. That was my first Klein ratcheting screwdriver I purchased.
I just bought the 11&1 @Home depot Saturday. & $21 bucks. I went to Lowes right after and checked out the tough built tool boxes and the Klein Mod box tool boxes. That Klein orange is so awesome. I'm sold. Klein and knipex are my go to tools. A great video brother. Have a great weekend. 😊
I know… they just keep coming out with them. 😂 I wouldn’t have bought it if I wasn’t wanting to get another one if this type to make flip screwdrivers for specific things. I thought why not get it and share it. I did buy the last one knowing I was giving it away. 😂
@@MORGANSMaintenance Jokes aside, the video is very good - after watching it I know everything about the tool I will never buy :) I just realised the only exchangeable screwdriver I have is Wera and I don't have any ratcheting ones. That shows my need for screwdrivers. But I have 3 cordless impact drivers, 3 cordless light-duty drill-drivers, 1 cordless heavy-duty hammering drill-driver, 1 cordless heavy-duty drill, 1 corded light-duty drill-drivers, 2 corded heavy-duty drills (non-stationary ones). And two full SYS1 Sortainers with bits in every possible length and variation. Not to mention two backup boxes with the same assortment I keep in home.
@@MORGANSMaintenance 5 angle grinders, 3 SDS+ hammer-drills, uncountable amount of accessories for power tools I've used only once etc. Recently I needed to fix my own bed - these planks underneath the mattress got loose. I was trying to use screws to fix them and when looking for some clamps, I've found my Makita heavy-duty pneumatic stapler. I forgot I had it and it saved me a ton of time.
Bought the 11 in 1 rcht and I absolutely love it. I swapped out the whole 5/16” side for a Malco stubby 1/4” 5/16” flip bit for HVAC use. I kept the 3/8” bit but replaced the bit holder with my old HVAC 8in1 bit holder (PH2, Slotted, thermostat driver and schrader) It is now an essential part of my EDC.
i agree with you on the placement of the controls on most ratcheting screwdrivers. I want to love them but they always cause me more headache than benefit. I wanna try this one but i got so many that I hate I'm scared to buy another one.
I bought and use it, but I use it more in the locked position than ratcheting. The only real advantage to this one is if you buy the newer KNect sets that work with it. They only fit in the ratcheting version
Looks like the handle has a wire clip inside that locks onto the grooves in the centre of the 1/2" hexagon drive to keep it in position. I usually end up using my other hand to change the ratchet direction on the handle so the ratchet position doesn't affect me the same.
It’s a friction fit for sure. Maybe Klein is moving more in that direction instead of the ball bearings. That’s probably the more effective way to use a ratcheting screwdriver… my muscle memory just won’t let me do it 😂
I stood in the store for an hour, debating on what to buy. After watching this, I want to go try the Ratcheting driver but I walked out with the standard 11 in 1. Nice info. My question is, how much slop do you have in the handle? Does the teeth grind any? How smooth function is it after some heavy use?
It’s not the best ratcheting screwdrivers in the world… but for the price it’s pretty good. I’m not a big ratcheting screwdriver person so mine hasn’t got extreme heavy use (as a ratcheting) since I’ve picked it up. I don’t use a ratcheting screwdriver enough that most of the time I forget it’s even an option and I leave it in the locked position... too much muscle memory in my old brain of a regular screwdriver motion. 😂. The amount I have used it, it has worked fine. I also have so many screwdrivers, I swap around a lot. Hopefully some others can help you out with a better heavy use scenario that use a ratcheting style 100% One thing to keep in mind is that I believe the KNECT 1/4” set I believe only works with the ratcheting. I could be wrong on that, but I think that is true. So if you are thinking about getting that in the future, that may be a part of the decision.
Goodday sir,forgive my ignorance. You mentioned you're go to screwdriver. The particulars of this screwdriver will be appreciated,or is it the same as the one aforementioned? Thanks Cobus🐳
This is a ratcheting screwdriver option for the one I mention as “my go to” which is this one Klein Tools 11-1 IMPACT Screwdriver - It's What Else You Can Do With The Screwdriver that Matters! ua-cam.com/video/PZIu7NTHCYc/v-deo.html They are the same screwdriver… one is a ratcheting version and one is not.
@@konadayz426 I’m not sure. I’ve only bought this one that is a ratcheting screwdriver. I have a couple of the non ratcheting. Maybe someone can chime in and help us out
Klein seems to be getting closer to a lot of their tools to have interchangeable ‘bits’. I like the flexibility of them. I saw this one on their website and thought the ratcheting was a typo as I was buying the other ratcheting new one with the orange bits. Wish I would have looked harder because the one you showed would be perfect for me. I usually keep the ratcheting locked but I find it a great feature when space is limited
I’ve been the same on most ratcheting screwdrivers because I don’t like having to use my other hand to change it… so I just leave it in the fixed position. That and it’s hard to teach an old dog new tricks 😂 I’ve been a manual screwdriver person most my life.
I’m the same about ratcheting screwdrivers, the placement always seems off, or the back drag is too much. I have Vessel ratcheting and like being able to dial it. I might have to pick this up to replace my Klein 11-n-1. I’ll set up the barrel of my current one with a specialty set up and keep that beside the new one. Thanks for the video.
I just received Milwaukee 15” structured tool tote. Unboxing tomorrow. I don’t have Veto bags but some of the original packout tool bags. You almost convinced me to get a Veto, but I do love my packout. It’s as pricey as Veto, so if I don’t like it it’s going back and I’ll ask you for a Veto selection.
@@brianhall9019 yeah I looked at those too. They do look nice. There is something about the pockets of a Veto. They are just different… or at least that’s what my mind tells me to justify the price 😂
I’ve never accessed a Veto. A lot of pockets collapse in on themselves. I’ll let you know what I think of it. It’s $269…but snagged Home Depot buy more save more deal ($50 off $199, $90 of $299) I threw in a $35 packout 1/2 organizer and got it all for $215…I can justify anything..😂😂😂
32501Hd comes in set mod case with bits now 47 pieces i believe they did this because people say dont put in impact and they included an impact shaft separate
Thanks for the great video on the new Klien 11-1 impact-rated Ratcheting screwdriver, I have one on order arriving tomorrow. In your Klien non-ratcheting screwdriver video you showed a magnetizer but there wasn't a link to it can you post that link for me thanks?
Well, I guess I haven't bought a new Klein screwdriver in a couple of weeks. Here we go again! haha. I'm glad it fits my current sheath design too. Nice of Klein Tools to consider that. ;)
Awesome video. I have both impact screwdrivers. Where can I get that nice holder or holster for the screwdriver that you said you saw in Johnathan video? I’m sorry o don’t know who Johnathan is, either. Great work. Thanks 🙏🏼
It’s been awhile since I made this video but I believe it was a Riley Knife and Tool Sheath Klein Tools Screwdriver Holster from Riley Knife & Tool - Fits your favorite EDC? #tools #klein ua-cam.com/video/KXGpHC6sqzI/v-deo.html There is a link in the description of that video, but I believe it’s www.rileyknifeandtool.com
Can you put the three-piece Klein nut driver shaft on it? That seems like the ultimate screwdriver, but I don't know if if that would be a good idea due to how long it would make the screwdriver.
You can put it on there since it has a 1/4 shaft. It is only a little bit longer than in the normal flip socket handle, you just have to attach it to the middle piece and get rid of either your 3/8 or 5/16 attachment.
I keep seeing videos about Klein shifting over to Lowe’s and being a big deal. Our Lowe’s had one sad end cap with two offerings and that was it for Klein there.
Mine has a lot of hand tools, but the section is pretty small. They don’t have much of the bags/mod box/etc. My Home Depot didn’t carry much in store either, now they have almost nothing
You are the second person to tell me that. I believe it’s because some people were having issues with the shaft coming out a little too easy. If you kinda shook your screwdriver they would sometimes pop out. I don’t know if they added the ball bearing to help with that… but maybe 🤷♂️
Klein should be sending you a pay check if they arent. Just curious, do you ever hit the ratcheting switch by mistake? It looks so close to the handle where ill hold it. Regardless im gunna check it out.
I haven’t on this one yet. I do on my Vessel from time to time. They are the only two I use. I know Klein or Milwaukee could at least send me some swag 😂
Thanks for trying the old school 11 in 1 shaft! Interesting that it doesn't fit though. I've discovered at least one reason for the 12 point design. I'll make a video about it soon so keep your eyes peeled 😉 Also I love the fact that your 111st tool review is on an 11 in 1. You timed it perfectly!
That’s pretty cool, I didn’t even notice that. I think it’s the ball bearing on the OG shaft, without it it would probably go. Appreciate you again for letting me know 👍
@@MORGANSMaintenance I haven't opened it yet because I think the packaging is wrong. The package shows the ball detent on it like the older 11-1 impact version
@@mozzberg590 👍👍.. if I remember right, the ratcheting is held in with a ring… now the bit holders of the 11-1 are still ball bearing. I don’t think they have two options though, so I’d say if yours has the black ratcheting adjustment it should be the right one.
Yeah I’ve seen that. I haven’t decided if I’m getting it yet. It’s a little pricey for the sizes you get… but who am I kidding, I’m sure I’ll get it 😂 Appreciate it 👍👍
@sykotictendencies6032 true… anytime I can find ways to loose handles in my main bag is a win. My Lowe’s still isn’t carrying it yet, I’ve been waiting till I can just go in and get it.
I have a double ECX that I use occasionally too. It’s not impact rated, but I rarely take bits out of these and put them in my impact anyway. It’s just nice to have the option
Can I ask if any of you all have had trouble with this screwdriver? I bought one last night at lowes and opened it and the whole mechanism came apart first thing. Then I went back to exchange it today and on the new one the half inch hex part where the two impact sections go is stuck in the handle. Are any of you all having problems?
It’s at Riley Knife and Tool… I have a video here with links in the description Klein Tools Screwdriver Holster from Riley Knife & Tool - Fits your favorite EDC? #tools #klein ua-cam.com/video/KXGpHC6sqzI/v-deo.html I will have to look up exactly what the website is
The new one they made like that because their new impact pass through socket set you can actually fit the sockets in the end of the screwdriver handle and make a pass through ratcheting nut driver
@MORGANSMaintenance other brands have them such as husky gearwrench etc. And they are hit and miss I mean it's a specialty tool not something you would use all the time unless you wanted to it would beat having to have shallow and deep well sockets but unfortunately klein is known for electrical tools however if they expanded into a full blown 1/4 3/8 1/2 impact rated set of pass through sockets I'm sure they would make a killing
Lowes is the only place I can find this, but when I go to place the order it says item removed from your cart. But it's still in my cart. I tried this today, and I tried it a few days ago and the same thing! Anyone know where I can waste my dang $ already!?
@@wyattbreymeyer4033 yeah 11-1’s are my go to bag screwdriver. Get a lot done and only takes up one slot. My pouches I set up per job and run dedicated since I know what fasteners I’m getting into
It’s at Riley Knife and Tool… I have a video here with links in the description Klein Tools Screwdriver Holster from Riley Knife & Tool - Fits your favorite EDC? #tools #klein youtu.be/l rileyknifeandtool.com/?post_type=produc
It’s at Riley Knife and Tool… I have a video here with links in the description Klein Tools Screwdriver Holster from Riley Knife & Tool - Fits your favorite EDC? #tools #klein ua-cam.com/video/KXGpHC6sqzI/v-deo.html I will have to look up exactly what the website is but I believe it’s Rileyknifeandtool.com
So close to perfect they need to make it all magnetic so i dont need the single bit and make the nut driver like there multi nut driver so they hold the nuts lol
I wanna like them, but they tend to just get left in the “fixed” position. I just been turning my wrist for too long and My muscle memory hasn’t been programmed to use them. I know many people really really like them.
They Made it to work with and fit there new line Klein KNECT coming out. i.e. Klein Tools 32-Piece Standard (SAE) 1/4-in Drive 6-point Set Deep Socket Set Item #5389731 | Model #65300 at lowe's try it out on your channel and let us know that you think. Check out the Klein KNECT in this Video: ua-cam.com/video/CO5MU3oU8ww/v-deo.html
I’ll give it to them…They keep coming out with stuff. I don’t use as much of their stuff as I used to, but they are still getting quite a bit of my money 😂
I just purchased the klein 11-1 impact ratcheting screwdriver couple days ago and I love it. That was my first Klein ratcheting screwdriver I purchased.
The impact 11-1 has been one of the better Klein Screwdrivers they have come out with… if you like ratcheting screwdrivers it is a good option 👍👍
I just bought the 11&1 @Home depot Saturday. & $21 bucks. I went to Lowes right after and checked out the tough built tool boxes and the Klein Mod box tool boxes. That Klein orange is so awesome. I'm sold. Klein and knipex are my go to tools. A great video brother. Have a great weekend. 😊
Two of my favorite brands also 👍👍
Appreciate it
I love my Modbox, it’s such a versatile system, and the larger wheels make rolling them, even down stairs, easy!
@@AndrewBehm I just got a few of them to try out. They do seem pretty noce
I like that gentle chuckle in your voice at the very beginning. Even you find that number of screwdriver hilarious.
I know… they just keep coming out with them. 😂
I wouldn’t have bought it if I wasn’t wanting to get another one if this type to make flip screwdrivers for specific things. I thought why not get it and share it.
I did buy the last one knowing I was giving it away. 😂
@@MORGANSMaintenance Jokes aside, the video is very good - after watching it I know everything about the tool I will never buy :)
I just realised the only exchangeable screwdriver I have is Wera and I don't have any ratcheting ones. That shows my need for screwdrivers. But I have 3 cordless impact drivers, 3 cordless light-duty drill-drivers, 1 cordless heavy-duty hammering drill-driver, 1 cordless heavy-duty drill, 1 corded light-duty drill-drivers, 2 corded heavy-duty drills (non-stationary ones). And two full SYS1 Sortainers with bits in every possible length and variation. Not to mention two backup boxes with the same assortment I keep in home.
@@Stefan_Kawalec we all have the same problem… just with different style of the drug 😂
@@MORGANSMaintenance 5 angle grinders, 3 SDS+ hammer-drills, uncountable amount of accessories for power tools I've used only once etc.
Recently I needed to fix my own bed - these planks underneath the mattress got loose. I was trying to use screws to fix them and when looking for some clamps, I've found my Makita heavy-duty pneumatic stapler. I forgot I had it and it saved me a ton of time.
@@Stefan_Kawalec I rarely get rid of tools myself… there is always the one job that will come up that I will kick myself for getting rid of it
I Love it! The 12 point feature works great with Kleins new pass thru socket sets.
I have seen that. May end up picking those up… I’m still undecided on it at the moment.
Thanks for the info 👍
Bought the 11 in 1 rcht and I absolutely love it. I swapped out the whole 5/16” side for a Malco stubby 1/4” 5/16” flip bit for HVAC use. I kept the 3/8” bit but replaced the bit holder with my old HVAC 8in1 bit holder (PH2, Slotted, thermostat driver and schrader) It is now an essential part of my EDC.
These Impact 11-1 are the best in my opinion because you can customize them for certain jobs.
👍👍
i agree with you on the placement of the controls on most ratcheting screwdrivers. I want to love them but they always cause me more headache than benefit. I wanna try this one but i got so many that I hate I'm scared to buy another one.
I bought and use it, but I use it more in the locked position than ratcheting.
The only real advantage to this one is if you buy the newer KNect sets that work with it. They only fit in the ratcheting version
I just got the Proto tools 11 in 1. Very nice finish. It has the smallest handle of any multi driver that I have felt. And made in the USA!
I will have to look into that one 👍
This is a really good review. You pointed out lots of good features and the design differences. I really appreciate it.
You are welcome. Thanks for watching and taking the time to comment 👍
Looks like the handle has a wire clip inside that locks onto the grooves in the centre of the 1/2" hexagon drive to keep it in position. I usually end up using my other hand to change the ratchet direction on the handle so the ratchet position doesn't affect me the same.
It’s a friction fit for sure. Maybe Klein is moving more in that direction instead of the ball bearings.
That’s probably the more effective way to use a ratcheting screwdriver… my muscle memory just won’t let me do it 😂
I stood in the store for an hour, debating on what to buy. After watching this, I want to go try the Ratcheting driver but I walked out with the standard 11 in 1.
Nice info. My question is, how much slop do you have in the handle? Does the teeth grind any? How smooth function is it after some heavy use?
It’s not the best ratcheting screwdrivers in the world… but for the price it’s pretty good.
I’m not a big ratcheting screwdriver person so mine hasn’t got extreme heavy use (as a ratcheting) since I’ve picked it up. I don’t use a ratcheting screwdriver enough that most of the time I forget it’s even an option and I leave it in the locked position... too much muscle memory in my old brain of a regular screwdriver motion. 😂. The amount I have used it, it has worked fine.
I also have so many screwdrivers, I swap around a lot. Hopefully some others can help you out with a better heavy use scenario that use a ratcheting style 100%
One thing to keep in mind is that I believe the KNECT 1/4” set I believe only works with the ratcheting. I could be wrong on that, but I think that is true. So if you are thinking about getting that in the future, that may be a part of the decision.
Goodday sir,forgive my ignorance. You mentioned you're go to screwdriver. The particulars of this screwdriver
will be appreciated,or is it the same as the one aforementioned? Thanks Cobus🐳
This is a ratcheting screwdriver option for the one I mention as “my go to” which is this one
Klein Tools 11-1 IMPACT Screwdriver - It's What Else You Can Do With The Screwdriver that Matters!
ua-cam.com/video/PZIu7NTHCYc/v-deo.html
They are the same screwdriver… one is a ratcheting version and one is not.
What's the difference between the one you're showing 32500HDRT and the 32500HDRTG ? Oh and the HDRTG has that ball bearing on that center piece
@@konadayz426 I’m not sure. I’ve only bought this one that is a ratcheting screwdriver. I have a couple of the non ratcheting.
Maybe someone can chime in and help us out
Klein seems to be getting closer to a lot of their tools to have interchangeable ‘bits’. I like the flexibility of them.
I saw this one on their website and thought the ratcheting was a typo as I was buying the other ratcheting new one with the orange bits. Wish I would have looked harder because the one you showed would be perfect for me.
I usually keep the ratcheting locked but I find it a great feature when space is limited
I’ve been the same on most ratcheting screwdrivers because I don’t like having to use my other hand to change it… so I just leave it in the fixed position.
That and it’s hard to teach an old dog new tricks 😂 I’ve been a manual screwdriver person most my life.
I’m the same about ratcheting screwdrivers, the placement always seems off, or the back drag is too much. I have Vessel ratcheting and like being able to dial it. I might have to pick this up to replace my Klein 11-n-1. I’ll set up the barrel of my current one with a specialty set up and keep that beside the new one. Thanks for the video.
That’s why I end up just leaving them in fixed… which makes them not worth spending the extra money on.
👍👍
I just received Milwaukee 15” structured tool tote. Unboxing tomorrow. I don’t have Veto bags but some of the original packout tool bags. You almost convinced me to get a Veto, but I do love my packout. It’s as pricey as Veto, so if I don’t like it it’s going back and I’ll ask you for a Veto selection.
@@brianhall9019 yeah I looked at those too. They do look nice.
There is something about the pockets of a Veto. They are just different… or at least that’s what my mind tells me to justify the price 😂
I’ve never accessed a Veto. A lot of pockets collapse in on themselves. I’ll let you know what I think of it. It’s $269…but snagged Home Depot buy more save more deal ($50 off $199, $90 of $299) I threw in a $35 packout 1/2 organizer and got it all for $215…I can justify anything..😂😂😂
@@brianhall9019 we sound a lot alike 😂😂
32501Hd comes in set mod case with bits now 47 pieces i believe they did this because people say dont put in impact and they included an impact shaft separate
👍👍
Thanks for the great video on the new Klien 11-1 impact-rated Ratcheting screwdriver, I have one on order arriving tomorrow. In your Klien non-ratcheting screwdriver video you showed a magnetizer but there wasn't a link to it can you post that link for me thanks?
It was this one here amzn.to/47MBZCk
I use this one most of the time and it holds bits amzn.to/48URQQq
@@MORGANSMaintenance Thank you very much for the link.
@@nscaledelights 👍
Well, I guess I haven't bought a new Klein screwdriver in a couple of weeks. Here we go again! haha. I'm glad it fits my current sheath design too. Nice of Klein Tools to consider that. ;)
You know you’ve made it when they start building screwdrivers around your sheaths and not the other way around 😂😂
Where can one buy such a sheath? Would love to have one for my Klein!
Awesome video. I have both impact screwdrivers. Where can I get that nice holder or holster for the screwdriver that you said you saw in Johnathan video? I’m sorry o don’t know who Johnathan is, either. Great work. Thanks 🙏🏼
It’s been awhile since I made this video but I believe it was a Riley Knife and Tool Sheath
Klein Tools Screwdriver Holster from Riley Knife & Tool - Fits your favorite EDC? #tools #klein
ua-cam.com/video/KXGpHC6sqzI/v-deo.html
There is a link in the description of that video, but I believe it’s www.rileyknifeandtool.com
Can you put the three-piece Klein nut driver shaft on it? That seems like the ultimate screwdriver, but I don't know if if that would be a good idea due to how long it would make the screwdriver.
You can put it on there since it has a 1/4 shaft. It is only a little bit longer than in the normal flip socket handle, you just have to attach it to the middle piece and get rid of either your 3/8 or 5/16 attachment.
I keep seeing videos about Klein shifting over to Lowe’s and being a big deal. Our Lowe’s had one sad end cap with two offerings and that was it for Klein there.
Mine has a lot of hand tools, but the section is pretty small. They don’t have much of the bags/mod box/etc.
My Home Depot didn’t carry much in store either, now they have almost nothing
Sir what is the name of the sheath you used for this driver? Where can I get one? Thanks!
It’s at Rileyknifeandtool.com
He has a few different options. I have a few videos about them and the stubby versions
I just got one of the ratcheting 11 in 1 and it has ball bearing retention. They must have reverted to the older design.
You are the second person to tell me that.
I believe it’s because some people were having issues with the shaft coming out a little too easy. If you kinda shook your screwdriver they would sometimes pop out.
I don’t know if they added the ball bearing to help with that… but maybe 🤷♂️
Klein should be sending you a pay check if they arent. Just curious, do you ever hit the ratcheting switch by mistake? It looks so close to the handle where ill hold it. Regardless im gunna check it out.
I haven’t on this one yet. I do on my Vessel from time to time. They are the only two I use.
I know Klein or Milwaukee could at least send me some swag 😂
Good Spot ; hope it shows up here in Kanuckastan soon !
👍👍
@@MORGANSMaintenance I checked my Local Home Depot , they had never heard of it , hopefully I stirred up some interest !
I picked this up at Home Depot the other day as Lowes did not have it.
I just saw that Home Depot had it yesterday. My Lowe’s hasn’t had it in stores yet, only online
Thanks for trying the old school 11 in 1 shaft! Interesting that it doesn't fit though. I've discovered at least one reason for the 12 point design. I'll make a video about it soon so keep your eyes peeled 😉
Also I love the fact that your 111st tool review is on an 11 in 1. You timed it perfectly!
That’s pretty cool, I didn’t even notice that.
I think it’s the ball bearing on the OG shaft, without it it would probably go.
Appreciate you again for letting me know 👍
My original one fits. Was the first thing I did. Weird that his doesn’t.
I just picked one up today and mine has a ball bearing on the shaft, still has the 12pt on the handle
@@Rungziggy you got a ratcheting version too?
@@JonathanLD312 yes 11-1 ratcheting 32500HDRT. Just picked up yesterday from HD
What is that Klein handle directly in front of you on your videos? Is it a bit holder or coffee thermos
It’s a coffee thermos, I found it on eBay
I hope the malco bit can fit inside that new ratcheting 11-in-1 rachet driver!
It does… all the same stuff I have used in my regular one works in the ratcheting one
I just picked up this and the socket kits, 1/4 and 3/8 mod box kit
👍👍
My Lowe’s just put out some of the pass thru sets and the deep wells I reviewed in last little bit. I think I might buy the 1/4” pass thru.
@@MORGANSMaintenance I haven't opened it yet because I think the packaging is wrong. The package shows the ball detent on it like the older 11-1 impact version
@@mozzberg590 so you got the kit with a screwdriver inside the mod box? I saw that one too, but didn’t really look at it.
@@MORGANSMaintenance no, I got the 32500HDRT and the 1/4 and 3/8 modbox
@@mozzberg590 👍👍.. if I remember right, the ratcheting is held in with a ring… now the bit holders of the 11-1 are still ball bearing.
I don’t think they have two options though, so I’d say if yours has the black ratcheting adjustment it should be the right one.
I’m not sure if the sockets from the 3/8 will fit in the ratcheting screwdriver handle
👍… I’ll check it out and see. Thanks for the heads up
Its also compatible with the new Klein Knect pass through socket set
Yeah I saw that… I may end up picking it up, but haven’t 100% decided yet. Pretty pricey for the sizes you get.
The ratcheting one goes with the pass through wrench kit . The extension fits in the 12 point screwdriver handle and makes a long shank nut driver .
Yeah I’ve seen that. I haven’t decided if I’m getting it yet. It’s a little pricey for the sizes you get… but who am I kidding, I’m sure I’ll get it 😂
Appreciate it 👍👍
@@MORGANSMaintenance I got the set yesterday haven’t used it yet but it’s easier to carry than all the different nut drivers so I figure it’s a win .
@sykotictendencies6032 true… anytime I can find ways to loose handles in my main bag is a win.
My Lowe’s still isn’t carrying it yet, I’ve been waiting till I can just go in and get it.
Check this out from Klein . I think this will answer your question about why the handle is setup with the 12 point . Klein KNECT 65300 very cool.
Yeah I looked at those the other day. I may end p getting the 3/8 set. It is pretty cool. 👍
I swapped out the torx bit for a P3 and the square for a Milwaukee ECX bit on mine.
I have a double ECX that I use occasionally too. It’s not impact rated, but I rarely take bits out of these and put them in my impact anyway. It’s just nice to have the option
@@MORGANSMaintenance right, not sure if mine is either but I don't torque those screws to hard so I'm good with it on a drill.
Found something cool. Wiha insulated bits fit nicely in the little 1/4 in the middle
👍👍… so the middle section that you put the impact ends in?
Bits like these? amzn.to/3QNE8Y0
Yeah they hold decent. I figured since the bit has a suction when I pull it out I'd try it and it works great.
I've looked everywhere for an adapter to 1/4 and can't find one anywhere.
@@ReebyPlaysGames yeah I think they do all that on purpose… want to to be a returning customer for bits and drivers when one breaks.
Can I ask if any of you all have had trouble with this screwdriver? I bought one last night at lowes and opened it and the whole mechanism came apart first thing. Then I went back to exchange it today and on the new one the half inch hex part where the two impact sections go is stuck in the handle. Are any of you all having problems?
I haven’t had an issue with mine yet, maybe some others will chime in.
Hi! Can we get that sheath?
It’s at Riley Knife and Tool… I have a video here with links in the description Klein Tools Screwdriver Holster from Riley Knife & Tool - Fits your favorite EDC? #tools #klein
ua-cam.com/video/KXGpHC6sqzI/v-deo.html
I will have to look up exactly what the website is
rileyknifeandtool.com/?post_type=produc
Where do i get that holder for your screw driver?
Rileyknifeandtool.com I have a video for them, and also the stubby versions
Fwiw, both versions of the 11-in-1 were available in my usual Home Depot (Knoxville, TN) this weekend, 05/25/2024.
👍👍
The new one they made like that because their new impact pass through socket set you can actually fit the sockets in the end of the screwdriver handle and make a pass through ratcheting nut driver
👍👍
Yeah I’ve had a few people mention those to me. I may pick up a set of those
Appreciate it
@MORGANSMaintenance other brands have them such as husky gearwrench etc. And they are hit and miss I mean it's a specialty tool not something you would use all the time unless you wanted to it would beat having to have shallow and deep well sockets but unfortunately klein is known for electrical tools however if they expanded into a full blown 1/4 3/8 1/2 impact rated set of pass through sockets I'm sure they would make a killing
That screwdriver also fits the pass thru 1/4 inch socket set.
I’ve seen that… not at my Lowe’s yet, but I’ve seen a few videos.
Thanks for the heads up 👍
My Lowe’s had a ton of them
@@bigdaddy4975 mine does have a slot for them at least now. I just looked today… but they are out
@@MORGANSMaintenance Amazon with just these two tools you can do 95 % of all jobs
Lowes is the only place I can find this, but when I go to place the order it says item removed from your cart. But it's still in my cart. I tried this today, and I tried it a few days ago and the same thing! Anyone know where I can waste my dang $ already!?
Lowes is the only place it’s available for now… I’m not sure what’s going on with your cart
Riley sheath link?
Rileyknifeandtool.com
Found it Riley knifes n tools 👍🏼
👍
bit holders are great for different sizes of the same type of screws, otherwise 11-1 is elite
@@wyattbreymeyer4033 yeah 11-1’s are my go to bag screwdriver. Get a lot done and only takes up one slot. My pouches I set up per job and run dedicated since I know what fasteners I’m getting into
Whete can i get the riley sheath? Thanks
It’s at Riley Knife and Tool… I have a video here with links in the description Klein Tools Screwdriver Holster from Riley Knife & Tool - Fits your favorite EDC? #tools #klein
youtu.be/l
rileyknifeandtool.com/?post_type=produc
Which Malco size shank is that?
It’s the shorted one they sell (I believe 2”)… I think 2-3/4” is the longest you can fit of something into the shaft.
@@MORGANSMaintenance awesome, thanks brother.
@@Jesus_Strong 👍
Klein killing me with their new screwdriver models. They’ve been churning them out pretty fast.
I know… it’s like a new one every week.
I got one and I love this due to the new socket set works with cause of the new design so I bought both and it’s a life saver
@@adubcollectibles3201 👍
Nice tool. Now we need metric version. Regards from Europe 😅
As many people that have requested it, you would think someone would make it. 👍
Where can I get the sheath
It’s at Riley Knife and Tool… I have a video here with links in the description Klein Tools Screwdriver Holster from Riley Knife & Tool - Fits your favorite EDC? #tools #klein
ua-cam.com/video/KXGpHC6sqzI/v-deo.html
I will have to look up exactly what the website is but I believe it’s Rileyknifeandtool.com
excellent, they learned from Vessel
I definitely like the placement of it better… more likely to use it than just leave it in the fixed position 👍
So close to perfect they need to make it all magnetic so i dont need the single bit and make the nut driver like there multi nut driver so they hold the nuts lol
They have you sell as many prototypes as possible before they give you the tool you will never replace 😂
👍
Thank You 👍👍
Hello everybody, I am "Buddy"
Hey buddy 👍
This one is damn near impossible to find. Even online. No one has it.
Home Depot just started carrying it too. I noticed it today.
Not a racheting screwdriver type of guy lol
I wanna like them, but they tend to just get left in the “fixed” position.
I just been turning my wrist for too long and My muscle memory hasn’t been programmed to use them. I know many people really really like them.
They Made it to work with and fit there new line Klein KNECT coming out. i.e. Klein Tools 32-Piece Standard (SAE) 1/4-in Drive 6-point Set Deep Socket Set
Item #5389731 | Model #65300 at lowe's try it out on your channel and let us know that you think.
Check out the Klein KNECT in this Video: ua-cam.com/video/CO5MU3oU8ww/v-deo.html
Someone mentioned those yesterday. I will have to give them a look.
Thanks 👍👍
I'm tired of klein...they are always trying to get my money😂
I’ll give it to them…They keep coming out with stuff. I don’t use as much of their stuff as I used to, but they are still getting quite a bit of my money 😂
Cha-ching is what I hear when you're site pop's up in my menu Good product as usual ... Thx from Eddy Pu.D
Glad I can help you spend your money 😂👍👍
where are the bits?
@@joblow9752 this one comes with the bits in a 11-1 style. They are all combo bits in each end