Just one more important tip Julie..... don’t forget that when you are done cutting your design don’t forget to move the setting back to full cut-from kiss cut. I forgot, turned my machine off, was out of my craft room for a couple of days and when I went to use it again I couldn’t figure out WHY on earth I wasn’t getting a full cut on cardstock! Then the lightbulb hit me! 😻. Great video!
THANK YOU so very much. I just got the machine as a early christmas gift SDX125 (I am in the Netherlands) AND just did my first ever vinyl cut and thought this cant be right its a pain to weed. I am doing a project of 7 bags for my husbands team and was about to cry. So glad you made this video
Would you do a video on using the DX to cut glitter vinyl? Do you make any adjustments for the glitter with the auto blade? Or should I use the old Standard blade and make changes to cutting?
this is a great video. I am having some trouble with both my mats. One message is "mat can't be used" and the other "mat not recognized". any ideas what the problem might be? thank you
Thank you for watching Pat. We are sorry to hear that your ScanNCut is not cutting the same on your test cut and on your project. Please see the link below for further assistance: help.brother-usa.com/app/answers/detail/a_id/169472 If you are still experiencing the same issue, please contact Brother Customer Service at: www.brother-usa.com/support
I used my scan n cut to cut glitter vinyl. Oh the horror, the vinyl started to get stuck inside the machine now I cannot get some of the little pieces out of the machine. This is horrible, I did half cut and changed the pressure but as it cut the small pieces started to come loose. Not sure how to get this stuff out of my machine
Non-Brother vinyl has not been tested on the Brother ScanNCut SDX225. Below is a link to the Brother ScanNCut vinyl: www.brother-usa.com/search#q=vinyl&t=tab-Supplies-and-Accessories&layout=card We recommend using genuine Brother products for best results. You can refer to the link below for thicknesses and combinations: support.brother.com/g/b/faqend.aspx?c=us&lang=en&prod=hf_sdx225eus&faqid=faqh00101049_000
Hi Julie I just got my scan and cut 1200 sdx and brought everything I could even the vinyl roller I was wondering if I can use the Cricut vinyl rolls on this as I did have a cricut maker and I have loads of rolls of vinyl and iron on vinyl rolls there is not a lot of videos at the minute for this machine and was just hoping you would might be able to help thanks again lee
Just one more important tip Julie..... don’t forget that when you are done cutting your design don’t forget to move the setting back to full cut-from kiss cut. I forgot, turned my machine off, was out of my craft room for a couple of days and when I went to use it again I couldn’t figure out WHY on earth I wasn’t getting a full cut on cardstock! Then the lightbulb hit me! 😻. Great video!
Great reminder! I was admonishing myself to remember that too...but alas, I forgot. Thanks for being willing to mention that.
THANK YOU so very much. I just got the machine as a early christmas gift SDX125 (I am in the Netherlands) AND just did my first ever vinyl cut and thought this cant be right its a pain to weed. I am doing a project of 7 bags for my husbands team and was about to cry. So glad you made this video
I just bought this machine and am cutting Vinyl, these videos are super helpful! thank you
Thank you for watching! We are so glad that you are finding our videos helpful.
Thank you for doing this. Awesome! Hope you are well during these crazy times.
Thankyou so much for this video! It was exactly what I needed! Love your amazing tips and tricks Julie!
Thanks Julie - just what I needed.
Thank you Julie found this very helpful 😘
Thanks, helped a lot!!! more videos pleaseee!
Great video!
Thanks, Crissy!
Thank you for watching!
great video. Clear and c ocie. thank you x
Thank you for watching and glad you found the information helpful!
Would you do a video on using the DX to cut glitter vinyl? Do you make any adjustments for the glitter with the auto blade? Or should I use the old Standard blade and make changes to cutting?
this is a great video. I am having some trouble with both my mats. One message is "mat can't be used" and the other "mat not recognized". any ideas what the problem might be? thank you
good video can you do a video where you draw a pattern first on vinyl then cut it out with DX please
Great video, thank you. Where do you get the vinyl transfer material that you used to put the leaf on your bag?
Would Brother ever consider having the Canvas Workspace do curved lettering? I need to do a name on a marine floatation ring.
Our machine tests fine but when the actual pattern (same vinyl, same may?) is sent in to be cut it cuts the vinyl and paper. Thoughts?
Thank you for watching Pat. We are sorry to hear that your ScanNCut is not cutting the same on your test cut and on your project. Please see the link below for further assistance:
help.brother-usa.com/app/answers/detail/a_id/169472
If you are still experiencing the same issue, please contact Brother Customer Service at:
www.brother-usa.com/support
I used my scan n cut to cut glitter vinyl. Oh the horror, the vinyl started to get stuck inside the machine now I cannot get some of the little pieces out of the machine. This is horrible, I did half cut and changed the pressure but as it cut the small pieces started to come loose. Not sure how to get this stuff out of my machine
Hi Julie, please tell me about the transfer paper, what brand, the grid paper at the end,
Hi thanks for the videos , do you have a video available on start to finish on how to , vinyl fonts to then put on glass or mugs , ps
Can you use cricket vinyl on the brother? Where do you buy your vinyl?
Non-Brother vinyl has not been tested on the Brother ScanNCut SDX225. Below is a link to the Brother ScanNCut vinyl:
www.brother-usa.com/search#q=vinyl&t=tab-Supplies-and-Accessories&layout=card
We recommend using genuine Brother products for best results. You can refer to the link below for thicknesses and combinations:
support.brother.com/g/b/faqend.aspx?c=us&lang=en&prod=hf_sdx225eus&faqid=faqh00101049_000
What kind of transfer paper did you use here? Where can I buy it? Thank you
Can one use clear contact paper as transfer paper?
What vinyl do you use and where did you purchase it?
I'm new and I'd like to know this too.
Hi Julie I just got my scan and cut 1200 sdx and brought everything I could even the vinyl roller I was wondering if I can use the Cricut vinyl rolls on this as I did have a cricut maker and I have loads of rolls of vinyl and iron on vinyl rolls there is not a lot of videos at the minute for this machine and was just hoping you would might be able to help thanks again lee
Where do I get the vinyl from on the rolls as I love in the uk thanks
Can you use any type of vinyl?
The maximum recommended thickness for vinyl is 0.2mm for best results.