🏸 Get your hands on these grips at Yumo! bit.ly/shopyumo. Here are some of our favorites! bit.ly/YY-AC102EX bit.ly/VictorNonSlip bit.ly/YY-AC402EX And for grip powder: bit.ly/YonexGripPowder Happy Gripping!
I am returning to badminton after a long period, and my two rackets grips have had a lot of wear and tear, so thank you ... I have now managed to replace the grip.
Very nicely done.. I am one of those who starts off with the square end and finishes with sticky end.. It avoids the sticking yonex piece again and cutting the grip at the end..
Wow!! You make it so easy. I bought 4 grips a week ago and kept wondering where to start, should I take the old grip off or not, but I'm glad I saw your video and clear instructions about the procedure. So, I'll attempt doing my rackets without removing the old grip. Thanks you once again.
I usually use two different thickness grip (kinda like how Lin Dan uses towel in the middle and bare wood for the top for better touch and control). I use thicker grip in the palm section, either towel or PU grip is fine. I use thinner super grap in the top for the thumb and pointer finger to rest on. For me this gives you the best of thick vs thin grips. Thick enough to not strain your hand on clears and smashes but thin enough for control when at the net and for easier switching of hand grips for different shots. You can do this with either two layers of yonex super grap for a minimal difference in thickness or use supergrap and thick grip for a more pronounced effect. You can use cushion wrap to increase the overall thickness and cushioning if needed on the handle.
Greetings from Europe, appreciated even in 2023! Now I can dust off my speedminton rackets after 3-4 years as I found recently the grip falling apart.. Thank you!
normally i remove the plastic cover and the original factory grip leaving the wood exposed before applying a thin overgrip or towel grip. This decrease the thickness dramatically, improves control. Once I tried this, i never look back and removed all of the original factory grip from my racket collection
Hello! Great video,my mom played badminton when she were a Child and they had really good raquets then. Everthing without the grip is good så im using this very much
Best way is to take off the original grip, put electrical tape or some sort of tape to protect the wood handle. Adds about 1.5g to 4g depending overlap etc. Then put on your favorite grip whether it be a replacement or overgrip or two overgrips etc.
I used some 25mm wide physiotherapists strapping tape around a strip of old bicycle inner tube cut to 20mm wide as I have big hands and they didn't have a large-grip racquet in stock (and I'm a tight-arse.).
Hello! The thickness the overgrip adds is quite minimal. Depending on the overlapping, you can somewhat adjust the thickness as well. For those who want their handle thinner, then removing the base grip before any other applications would work!
I've only watching this because i accidentally sliced the grip of my selfie stick upon opening the package. 😂 😅 Was looking for something similar to these grip tapes
please also keep in mind that every overgrip (approx. 6-10g) will change the balance point of the racket and also add weight to it !!! A head heavy racket can easily turn into a even balanced or head light racket or vise versa if you take the original grip off !!! ;-)
Awesome! I bought a big roll of grip tape though and I probably don't want to peel them all. How long of a grip tape should I peel out before cutting it?
If you purchased a big roll of badminton grip tape, they should be sectioned off by strands as you pull. If not, I would recommend measuring out yourself how much grip tape you typically use on your racket as some people prefer more thick (more overlap) or more thin (less overlap) for their handles!
If the old grip is completely worn and black dye keeps coming off onto your hand, can you use these grips to re tape it? Maybe just double wrap as you're going up?
If I use the second method and I didn't notice the sticky end of the grip is not at the right position until I reach the upper handle that would be awkward.
something is not right.. when you cut the grip at the end, the sharp end tip is at the bottom end , this way \ . But when you finished the wrap, the sharp end tip is ended on top, this way / . How is that possible.
Sorry ser , my english not good I have a question using Indonesian Saya pengguna satu lapis grip karet , saat bermain badminton saya mengeluarkan keringat yang banyak dan grip tidak dapat menyerap keringat yang terlalu banyak itu dan pertanyaan nya , apa grip karet yang cocok untuk dapat menyerap keringat saya yg terlalu banyak ? G5 is my best size
im watching this video but i dont have the Yonex Tape.I used double sided tape.And its okay but its sticky inside.I didnt Cut tge white ones cause i needed them
🏸 Get your hands on these grips at Yumo! bit.ly/shopyumo.
Here are some of our favorites!
bit.ly/YY-AC102EX
bit.ly/VictorNonSlip
bit.ly/YY-AC402EX
And for grip powder:
bit.ly/YonexGripPowder
Happy Gripping!
I’ve been playing badminton since I was a kid. This is the first time I’ve replaced my racquet grip to my satisfaction! Thank you
Bro i have you managed play with a single grip have not you have rashes on your hand
@@DeviHaldarprobably his skin is tougher
Bro I change grip after 2 weeks 😂😂😂 or 3 weeks maximum 😂😂
I am returning to badminton after a long period, and my two rackets grips have had a lot of wear and tear, so thank you ... I have now managed to replace the grip.
I just did the grip myself using the first method. It looks okay. Hope it lasts long. Thanks !!
Glad to know the video helped! :)
Did it last long?
@@36kirby94 yes
@@rammohan959 I am at peace with this closure
so does it last for this 3 years? Wrap-Beginner here too
I've been struggling with the cutting the grip edge part, so your tips really help in tidying thing up. Thanks!
@@jemrylie I accidentally cut in the wrong direction. Still works fine but had to be careful with the final yonex tape. Will see how long it lasts.
Very nicely done.. I am one of those who starts off with the square end and finishes with sticky end.. It avoids the sticking yonex piece again and cutting the grip at the end..
I think that is how it's supposed to be done else why would the glue part would he on the narrow end rather than broad end
@@krishna_o15 but then why they give the yonex black tape?
@@naman1312 branding on every part also broad part is always used at bottom
@@krishna_o15 hmmm
for long term use, sticky end just helps in placing the black tape better@@naman1312
Thanks so much. I've just used your info to wrap my rackets handle.....much easier than I thought
Wow!! You make it so easy. I bought 4 grips a week ago and kept wondering where to start, should I take the old grip off or not, but I'm glad I saw your video and clear instructions about the procedure. So, I'll attempt doing my rackets without removing the old grip. Thanks you once again.
Your racket looks soo cool.
I usually use two different thickness grip (kinda like how Lin Dan uses towel in the middle and bare wood for the top for better touch and control).
I use thicker grip in the palm section, either towel or PU grip is fine. I use thinner super grap in the top for the thumb and pointer finger to rest on.
For me this gives you the best of thick vs thin grips. Thick enough to not strain your hand on clears and smashes but thin enough for control when at the net and for easier switching of hand grips for different shots.
You can do this with either two layers of yonex super grap for a minimal difference in thickness or use supergrap and thick grip for a more pronounced effect.
You can use cushion wrap to increase the overall thickness and cushioning if needed on the handle.
show me how
Without cutting the leftover grip i just wrap it all the way down. Leaving gaps between. It gives me good feel while holding my racquet.
Complete and perfect video, thanks
Greetings from Europe, appreciated even in 2023! Now I can dust off my speedminton rackets after 3-4 years as I found recently the grip falling apart.. Thank you!
Great to hear!
awesome tutorial!, just wrapped my large hardrock Tommy Lee drumsticks with it, thanks Tommy :)
!! wtf
Large hard cock
normally i remove the plastic cover and the original factory grip leaving the wood exposed before applying a thin overgrip or towel grip. This decrease the thickness dramatically, improves control.
Once I tried this, i never look back and removed all of the original factory grip from my racket collection
it's all preference :3
I always Wrap the grip the other way around. So much better . You don't have to cut it off or used additional adhesive...
Hello! Great video,my mom played badminton when she were a Child and they had really good raquets then.
Everthing without the grip is good så im using this very much
Just bought my first racket & overgrip! This video helped me a lot. Thanks dude!
Always wrapped mine with the stick end finishing at the top of the racket. No need for Yonex sticker and cutting. Just faster.
puting my grip was hard before i watched this video and after i watched this video its was too easy
2nd method is better for me...i don't like to use Yonex adhesive sticker and DON'T like to cut the grip as well
Thanks for a great tutorial! I followed it and applied it beautifully!
Thankyou bro I was new to change my grip
I too did my first grip but not perfect and I hope it does the job.
thanks my guy, now i have grip tape on my tablet pen, i can finally become god and get loads of pp in osu
lol same
Thanks a lot. Never thought it would be so easy
Usefull tips, easy to follow and a good example. thanks
Thank you for your support😃
Best way is to take off the original grip, put electrical tape or some sort of tape to protect the wood handle. Adds about 1.5g to 4g depending overlap etc. Then put on your favorite grip whether it be a replacement or overgrip or two overgrips etc.
I used some 25mm wide physiotherapists strapping tape around a strip of old bicycle inner tube cut to 20mm wide as I have big hands and they didn't have a large-grip racquet in stock (and I'm a tight-arse.).
I always do the Lee Chong Wei style always ending with the adhesive end tip
A very good video. I did my first upper wrap in one go. Thank you!
Bravo🎉
It was so helpful😊
We’re so glad!
Hi I am new to badminton how come people don't remove the old grip before applying the new grip? doesn't that make the handle thicker? Thanks
Hello! The thickness the overgrip adds is quite minimal. Depending on the overlapping, you can somewhat adjust the thickness as well. For those who want their handle thinner, then removing the base grip before any other applications would work!
Very very nice man
Nicely demonstrated
Helpful tutorial - thanks!!
I wished id watched this before trying to wrap my racket at school 3 yrs ago…
Thanks for sharing these tips !
I've only watching this because i accidentally sliced the grip of my selfie stick upon opening the package. 😂 😅
Was looking for something similar to these grip tapes
Now I know how to grip racket! Thx
helped me a lot. Thx!!
Thanks for the very easy tutorial
please also keep in mind that every overgrip (approx. 6-10g) will change the balance point of the racket and also add weight to it !!!
A head heavy racket can easily turn into a even balanced or head light racket or vise versa if you take the original grip off !!! ;-)
you mean if you do NOT take the original grip off?
Wow now i need to change my black knight
I have the Same racket! Gonna hope I don't screw up when I do it myself lol
Awesome! I bought a big roll of grip tape though and I probably don't want to peel them all. How long of a grip tape should I peel out before cutting it?
If you purchased a big roll of badminton grip tape, they should be sectioned off by strands as you pull. If not, I would recommend measuring out yourself how much grip tape you typically use on your racket as some people prefer more thick (more overlap) or more thin (less overlap) for their handles!
I wish i had scene this before wrapping my grip
Great explanation! Thank you 🙂 Result is great! 👍
Can u suggest best racquet within 60 $
Much Appreciated!
Well done.. thanks guy!
White on a white background?
If the old grip is completely worn and black dye keeps coming off onto your hand, can you use these grips to re tape it? Maybe just double wrap as you're going up?
I just bought a new racket, should I wrap the grip over or remove the original grip first?
Any advantage in wrapping it tighter? Like stretching it out a bit? Or personal preference?
personally it sounds like stretching the grip would weaken its integrity, so it would be quicker to wear (rip & tear).
Which process is better 1 or 2 !
It would be down to your own personal cosmetic preference! Either method works but the 2nd process would allow you to skip on the tape!
If I use the second method and I didn't notice the sticky end of the grip is not at the right position until I reach the upper handle that would be awkward.
thx for the tips =)
This helped a lot, thanks!
Good one👏🏻
Thank you! Very easy to follow.
If i had to cut i should keep the narrow edge at top
When we playing daily 2hours For how many months it will be useful bro ??
Amazing I will try it but first I will buy it.
I genuenly prefer II method but i use a bit slant at start
This video helps me thanx
Thanks guy 🎉
Great work 🤩🤩
Good job mate
Thanks for sharing!
Can we draw on this so I can customise my racket?
Sir can i put this grip on my original yonex grip which comes with the racket...the standard one ???
yes of course you can thats what overgrips are for ... cheaper solution that saves wear on original grip
In which racket u wrapped the grip bro.
I think it's a Yonex Racket
Yonex Duora6
can we apply it as car steering wrap ?
Thanks for the vid! It was helpful
thanks💗
something is not right.. when you cut the grip at the end, the sharp end tip is at the bottom end , this way \ . But when you finished the wrap, the sharp end tip is ended on top, this way / . How is that possible.
Hi , i just wanna ask How much is your Voltric Z Force II if you convert it to Philippine peso
By putting the small part up will it get lose , is it possible?
I need to place extra tape becayse that white thin not stick
Can I put an over grip on top of an anti slip grip??
Technicaly yes but it's your preference.
very well done
Can you tell me which grip comes along with the racket itself?
And it help me alot
If you cut the end, why not begin wrapping from the other end???
thanks king
Wow incredible
Hi, may I know what yonex racket did you hold at the beginning of the video? The one with white, blue and red colour?
nice tutorial!
hi, my leather grip is already torn and wear. where should i buy the leather grip to replace my old one
Can we remove the original grip and apply electrical tape and then apply the over grip
Very informative video Keep it up bro.
It's very good vidio thanks for thath i just gripped ma racket first time. Thanks
Thank you!
Very neat
nice work 👍
thanks
i also make a video on "how to repair badmintion string "
What racket did you use
Sorry ser , my english not good
I have a question using Indonesian
Saya pengguna satu lapis grip karet , saat bermain badminton saya mengeluarkan keringat yang banyak dan grip tidak dapat menyerap keringat yang terlalu banyak itu dan pertanyaan nya , apa grip karet yang cocok untuk dapat menyerap keringat saya yg terlalu banyak ? G5 is my best size
very helpful, thank you!
im watching this video but i dont have the Yonex Tape.I used double sided tape.And its okay but its sticky inside.I didnt Cut tge white ones cause i needed them