Honest!Simplistic!Accurate!No BS!!Functionality!Reliability!Driveable!Affordable Ripp is Amazing in every aspect.Saving for my kit now that my 11 Charger is paid off.Can't wait,should be real soon
This guy is awesome hes a good representation of ripp. Everything just straight forward and no bullshit. I saw a video of sprintex on the dyno and they had 37’s up front and stock tires in the back. None of that bullshit with ripp
@@RIPPMODS hey I wanted to ask if you do the extra mods will that make the car more reliable like the piston and what not, I do realize that you guys are know for it and I just want the most of my car and I also am getting an awd 3.6l 300 2017 just wanted to ask if that was a problem?
How does the supercharger handle the cold temperatures of Chicago in the winter?? Sometimes it gets -0F and lower,,, will any damge occur? Or does it perform diferent?
RIPP Superchargers has sold over 8000 kits worldwide, most of those are for Jeep Wranglers which are used in all conditions. Additionally we have supercharger heaters for extreme conditions. Please visit www.rippmods.com for more information on your vehicle or email sales@rippmods.com for more details.
Will I need to buy new head studs to handle this power or will the stock ones be sufficient? Do the kits come with the hex dip stick or the Allen key one?
i have a 3.6 powered 300 and i have 24 inch wheels on it. will adding a ripp kit hurt the car any way? i have a adequate aftermarket brake system. (baer brake kit)
i have to admit i’m excited to get this kit. what would be the max number to stay at before stuff begins to get broken. i myself want to stay within the 430-440 range. i think it’s cool that i can spend WAAAAYYYYY less money and still get close or actually get to 392 power.
Hello @charlessexley7539, That's a great question. We expect a power difference between that AWD and RWD Chrysler 300. On an AWD Vehicle, there is more drive train loss. We highly recommend doing a before and after regarding power on your vehicle, though we still foresee an increase of around 150-170 HP. Installation-wise, there should be no difference in our testing. If you have any additional questions, or need more clarification, please email RIPPmods@RIPPmods.com, we will gladly help you there.
Is there any knowlage on how the engine internals head gaskets and 8 speed trans hold up? Are there any number for max output they will handle? Curious cus I doubt the internals are forged
Well.. we have 7000+ kits sold worldwide with our Jeep Wrangler kits and nearly 1000 SUV and car kits sold over the last 11 years with less than a 1% fail rate as testimony. Additionally the 3.6 Grand Cherokee and Durango guys do an awful lot of towing with theres. Both the engine and drivetrain have stood up strong. Lastly we have been through the internals and they are very beefy. We have clients running ethanol with 500plus whp.
Would a kit for the Pentastar 3.6 fit on the smaller 3.2 (KL Cherokee)? Both engines share the same block, so in theory the fwd durango kit could work? Not sure if it would blow up my engine though lol
This is not, but we've done a Challenger AWD and it's the same platform. Additionally the AWD Grand Cherokee and Durango V6 are the same drivetrain and we've been selling those for 4 years with no issues.
Hello @bulletben5670, We are currently in the process of finishing up production for the supercharger kit, our ETA for the release is in January of 2025. If you would like to be notified when the supercharger kit is released, please supply your email address, or email RIPPmods@RIPPmods.com, with your full make and model of your vehicle. Keep your eye out for more updates regarding the kit in December and January.
Hello @scottpearce7466 We have had no issues with the AWD GT package on a Dodge Challenger in our testing and installation of our kit. If anything does arise, or you have any additional questions please email RIPPmods@RIPPmods.com, we will gladly help you there.
Hi @eballer48 We do not currently offer supercharger kits for Chrysler 200 Pentastar 3.6L, but we have several things cooking in R&D ;) While we cannot provide any dates for availability at the moment, if you send us an email to RIPPmods@RIPPmods.com with your vehicle information, we would reach out as soon as it's available.
Hi @Vroy04 We do not currently offer supercharger kits for your 2011 Chrysler 300 V6, but we have several things cooking in R&D ;) While we cannot provide any dates for availability at the moment, if you send us an email to RIPPmods@RIPPmods.com with your vehicle information, we would reach out as soon as it's available.
When Will you start making a RIPP Supercharger for the 5.7 L hemi I currently own a 2016 dodge charger with a 5.7 L hemi and I am very interested in purchasing a ripp supercharger. When will this be available?
Can you plz let me know where I can get this complete set up for my 2018 Chrysler 300s I want everything you said that came with it air intake everything. I live in Peoria Arizona thank you I'll be waiting for your reply .looks and sounds amazing
These are bolt on kits ranging from $5900-$6600 depending vehicle year and options in the kit you order. The only added costs would be installation if done by a shop and dyno tuning.
450 reliably with no issues. So I really want to make sure the transmission can handle it. I've seen some v6 supercharged and they've had issues with the transmissions over heating
Andre Wilson at this point we have sold over 7000 Pentastar kits for Jeep Wranglers and Grand Cherokee. We have a less than a 1% drive train or engine issue over a 10 year span of kit sales.
RIPP Superchargers come on RIPP, I loved your kit but that’s a ridiculous claim. LESS then 1% failure rate in the past 10 years.. 😐 how would you even collect this type of information? The truth is adding boost just decreases the life of your vehicle. Out of the 5-6 people I know with this kit it’s been nothing but head gaskets, transmissions, and tuning issues nobody seems to be able to fix. That’s just the name of the game when you’re adding power but quit it with the less then 1% bullshit.... Just get the v8 like everyone else ends up doing anyways
The one supercharger has 800hp capacity... we would not waste our time putting two Superchargers on.. we'd build thr engine and install a 1000hp supercharger 😉
@@RIPPMODS can you guys please try to work on that! I know it will be tough with that 9speed transmission. But its a good car thats need the patience of a true tuner. Which is why i watch this channel.
Please visit www.rippmods.com for more information or email sales@rippmods.com for more details. We have dealers all over the world, check out our dealer link.
Yes - its just like stock with more power. ua-cam.com/video/ZS2yF9dAkkU/v-deo.html&lc=z23bwblq5nfdgjzsbacdp4343g1gjr2xq2j3fqivhc5w03c010c.1534478656442713
Please visit www.rippmods.com for more information on your vehicle or email sales@rippmods.com for more details. Parts and prices are on our site along with a few options 👍
The compressor we provide for these kits is rated to 800hp - So if you commit to building the rest of it, it can do 500 wheel. However, keep in mind that we display Wheel HP and not Crank. At the crank this is over 500hp.
I understand that for the '17 and '18 300 the kits are NOT 50 state legal, Why? I just purchased an '18 300s and I was wondering about some performance upgrades, and I came across you guys. Impressed enough, I'm was thinking seriously about purchasing a kit, but when I read that these kits (for my model year) are not legal, I took a step back. Any word on when these are going to be CARB approved?
The process for legalizing it is in motion, from a technical standpoint the cars are the same. From the CARB standpoint they need to be tested differently and will td ake a little longer to pass. We anticipate it will be legalized 2019 but cannot speak for the CARB offices ability to process it.
Honest!Simplistic!Accurate!No BS!!Functionality!Reliability!Driveable!Affordable
Ripp is Amazing in every aspect.Saving for my kit now that my 11 Charger is paid off.Can't wait,should be real soon
This guy is awesome hes a good representation of ripp. Everything just straight forward and no bullshit. I saw a video of sprintex on the dyno and they had 37’s up front and stock tires in the back. None of that bullshit with ripp
Every time I watch a video from you guys it makes me want a supercharger more and more!!
Hell yea guys, making moves!!!!
So that V6 will smoke a 5.7 hemi without a problem and keep up with the 392s or possibly win a race.
i think it would be faster than 392's
this 392 made 405 whp
ua-cam.com/video/v8IK-SyCxfM/v-deo.html
It really depends on the V6's final drive gearing too - the 2:61 cars don't come out of the hole strong, but they better on the highway.
Id go with sprintex. "Peak" HP is misleading
5.7 maybe. 392 doubtful.
@@Itr-tv7kt someone made a video srt8 stock vs v6 with a ripp, the v6 killed the srt8 every time
This is my car I just had a new tune installed. I’m now putting down 451hp and 375lbtq
Awesome, there is plenty of room left in the system, nice to see you finding it.
what tune is that? and where?
How much for original super charg run u
@@RIPPMODS hey I wanted to ask if you do the extra mods will that make the car more reliable like the piston and what not, I do realize that you guys are know for it and I just want the most of my car and I also am getting an awd 3.6l 300 2017 just wanted to ask if that was a problem?
@@moneybearrr9683 hello, please check out this video it answers this question and a few more ua-cam.com/video/ZS2yF9dAkkU/v-deo.html
Have you guys made a kit yet for the 300s 5.7 2017 or higher?
Team Ripp
I really love these videos man!!! Keep up the good work!!!
J2THEROC69 thank you
You nailed it on the head with the exhaust note
Hey, thanks so much, we have a few videos of our exhaust and clients are starting to understand the difference between noise and a tuned exhaust note.
ua-cam.com/video/m2XoTa_k_gg/v-deo.html
Can this be done to a brother engine in the Mercedes’ w204 M276 3.5L engine in a 2014 c350 ?
How does the supercharger handle the cold temperatures of Chicago in the winter?? Sometimes it gets -0F and lower,,, will any damge occur? Or does it perform diferent?
RIPP Superchargers has sold over 8000 kits worldwide, most of those are for Jeep Wranglers which are used in all conditions. Additionally we have supercharger heaters for extreme conditions. Please visit www.rippmods.com for more information on your vehicle or email sales@rippmods.com for more details.
Will I need to buy new head studs to handle this power or will the stock ones be sufficient? Do the kits come with the hex dip stick or the Allen key one?
Everything is designed for a 100% stock motor, upgraded head studs are not necessary.
Just acquired a 2019 300 with the 3.6. Would love to add this to it.🤤
I would make the drive from California to new York to have you guys install one on my Chrysler
What about the transmission? How will it hold up will all the added power??
Hi, with over 8000 kits sold worldwide we have less than a 01% drivetrain loss. The transmission is very strong and a non issue.
This may be a silly question but can the Tazer do the required PCM adjustments?
A Tazer cannot program the PCM. You must use the provided HP components.
i have a 3.6 powered 300 and i have 24 inch wheels on it. will adding a ripp kit hurt the car any way? i have a adequate aftermarket brake system. (baer brake kit)
No issue at all, you will just have more power - to move the vehicle.
i have to admit i’m excited to get this kit. what would be the max number to stay at before stuff begins to get broken. i myself want to stay within the 430-440 range. i think it’s cool that i can spend WAAAAYYYYY less money and still get close or actually get to 392 power.
430 440whp is perfect and safe whp
Would there be a difference if I have an AWD?
Hello @charlessexley7539,
That's a great question. We expect a power difference between that AWD and RWD Chrysler 300. On an AWD Vehicle, there is more drive train loss. We highly recommend doing a before and after regarding power on your vehicle, though we still foresee an increase of around 150-170 HP. Installation-wise, there should be no difference in our testing. If you have any additional questions, or need more clarification, please email RIPPmods@RIPPmods.com, we will gladly help you there.
Is there any knowlage on how the engine internals head gaskets and 8 speed trans hold up? Are there any number for max output they will handle? Curious cus I doubt the internals are forged
Well.. we have 7000+ kits sold worldwide with our Jeep Wrangler kits and nearly 1000 SUV and car kits sold over the last 11 years with less than a 1% fail rate as testimony. Additionally the 3.6 Grand Cherokee and Durango guys do an awful lot of towing with theres. Both the engine and drivetrain have stood up strong. Lastly we have been through the internals and they are very beefy. We have clients running ethanol with 500plus whp.
Do you guys have a dyno video with all the Mods installed? Exhaust, supercharger,coil packs??
No, we are showing moderate WHP, we have clients with 475whp with mods all together.
How much does it cost to instal on a 300s. 2018
The kit is an 8-10hr install by any reputable performance shop
I was sold when he said a v6 ripp supercharged beat a demon !!!!!!!
Yeah that’s not possible lol
Maybe in their dreams
Are there any plans for a supercharger system for a 2018 ram 1500 5.7 ?
im buying this! you guys rock!
i want to buy a kit for my ‘12 300 but i just don’t have 6 grand. how can i get a cheaper kit? perhaps used
How much boost can this pentastar 3.6l V6 engine handel with the stock ECU? will 7 psi overload it?
We frequently run 11psi without issues. Stock PCM is not a limitation. Our kits come complete
Would a kit for the Pentastar 3.6 fit on the smaller 3.2 (KL Cherokee)? Both engines share the same block, so in theory the fwd durango kit could work? Not sure if it would blow up my engine though lol
paulnmarshall it will not, that is a transversal engine and not the same.
are there any setups for a transverse engine? Or would working on one be pretty much impossible?
paulnmarshall we don't have a set up and we haven't looked into it. Pics on internet look tight thou.
How much will the kit cost for a 300S
Journey 2013 3.6? I know it's mounted transversely though... theoretically, could it be done?
francismori7 that well be a sleeper in the streets, you should do that
You guys dont sell 3g eclipses supercharger no more?
How much does this set up run on this particular car?
Please visit www.rippmods.com for more information on your vehicle or email sales@rippmods.com
Can this kit be installed on a magnum? Whether it’s a V6 or V8?
We do not support the 3.5 found in the Magnum V6
you guys got anything for a 2019 300s ? 🤔
YES Check out link
rippmods.com/products/2018-chrysler-300-supercharger-system?_pos=6&_sid=e0b81e580&_ss=r
@@RIPPMODS What about 2014 Chrysler Srt 6.4???
@@AngelMartinez-qx6ms we do not support the 6.4, check out Vortech Superchargers they have a nice kit for 6.4 cars
My car is a 2014 Chrysler 300s with 136k miles , will a supercharger still be good on a car like that .what would be required?
Absolutely. Considering many owners wait until the warranty expires most supercharger Pentastars are over 100k miles.
I have a 2015 300c awd will it still work. what do I need to do I want this kit
Buy the kit, bolt it up, tune it, go.
rippmods.myshopify.com/collections/chrysler-300/products/2011-2017-chrysler-300-supercharger-system
Hello i have a quick question, I Own a 2018 Jeep Grand Cherokee Altitude.. Will The Regular Jeep Grand Cherokee Super Chargers work on my Car? Thanks,
Zoac no it will not, they changed it in 15 we are working on them.
I'm not sure if I missed it or not but is this 300 AWD?
J2THEROC69 ua-cam.com/video/eEvyqKY7o7c/v-deo.html
This is not, but we've done a Challenger AWD and it's the same platform. Additionally the AWD Grand Cherokee and Durango V6 are the same drivetrain and we've been selling those for 4 years with no issues.
Do you guys make supercharger kits for the 5.7 v8 as well?
2011-2015 yes. 2016+ is on the board for R&D but not scheduled anytime soon.
Hello @bulletben5670,
We are currently in the process of finishing up production for the supercharger kit, our ETA for the release is in January of 2025. If you would like to be notified when the supercharger kit is released, please supply your email address, or email RIPPmods@RIPPmods.com, with your full make and model of your vehicle. Keep your eye out for more updates regarding the kit in December and January.
I bought a 2015 v6 and it has over 90,000, do you still think its a good idea?
ua-cam.com/video/ZS2yF9dAkkU/v-deo.html
How does it work with AWD GT pkg on Challenger?
Hello @scottpearce7466
We have had no issues with the AWD GT package on a Dodge Challenger in our testing and installation of our kit. If anything does arise, or you have any additional questions please email RIPPmods@RIPPmods.com, we will gladly help you there.
Would this fit in a 200 Pentastar 3.6
Hi @eballer48
We do not currently offer supercharger kits for Chrysler 200 Pentastar 3.6L, but we have several things cooking in R&D ;) While we cannot provide any dates for availability at the moment, if you send us an email to RIPPmods@RIPPmods.com with your vehicle information, we would reach out as soon as it's available.
If I were to buy a kit do you have anyone in NY that could install and nap it properly or could you guys do it?
Please email sales@rippmods.com for dealers near you
Got a 2011 Chrysler 300 V6 RWD with about 180k miles would this still be good on my car?
Hi @Vroy04 We do not currently offer supercharger kits for your 2011 Chrysler 300 V6, but we have several things cooking in R&D ;) While we cannot provide any dates for availability at the moment, if you send us an email to RIPPmods@RIPPmods.com with your vehicle information, we would reach out as soon as it's available.
@@RIPPMODS bummer but alrighty brother I appreciate it👌👌
@@RIPPMODS bummer but alrighty brother I appreciate it
Can you do this on a AWD 300S?
Yes! The AWD cars are so much fun with this kit. The kit itself is the same, you only need to find an AWD dyno to have the car tuned on.
When Will you start making a RIPP Supercharger for the 5.7 L hemi I currently own a 2016 dodge charger with a 5.7 L hemi and I am very interested in purchasing a ripp supercharger. When will this be available?
Will the kit work with a 2018 300 v6 how much would the kit cost ?
TheEvolution2649 not yet. No tuner has cracked the ecu yet
We are waiting on unlocked ECU from HP Tuners. Keep an eye on our social media for updates. Or email sales@rippmods.com to join mailing list.
RIPP Superchargers Im guessing that applies to the 2018 grand Cherokee 3.6 also?
I have a 6.1 srt8 Chrysler 2007 how much would it be to supercharge it
Is there a place here in Denver that can install the supercharger on my 2015 Chrysler 300S?? Need assistance.
Xavier Horace sure give sales guys an email sales@rippmods.com
RIPP Superchargers do I have to go to a Chrysler dealership for that?
Can you plz let me know where I can get this complete set up for my 2018 Chrysler 300s I want everything you said that came with it air intake everything. I live in Peoria Arizona thank you I'll be waiting for your reply .looks and sounds amazing
rippmods.com/collections/chrysler-300
@@RIPPMODS says 2011 to 2014 will this still work for my 2018 Chrysler 300s it's a v6 3.6 ?
@@richardcruz2630 There are three kits on that page. 2011-2014, 2015-2017, and 2018-2020. You need a 2018-2020 kit.
Do u gain or lose any mpg?
Under most conditions you will actually see an MPG increase with a supercharger.
Will your superchargers work on 2015 Cadillac CTS 3.6?
32poppa savage no sorry, it will not.
Where do we buy the supercharger for the Chrysler
Www.rippmods.com or sales@rippmods.com or 7184424723
@@RIPPMODS I saw the website do you guys not have supercharger for 2019 Chrysler models
Where are you guys located
Www.rippmods.com we have dealers all over the world or you can email sales@rippmods.com for more information
Respect the video a lot so how much would a build like this cost ?
These are bolt on kits ranging from $5900-$6600 depending vehicle year and options in the kit you order. The only added costs would be installation if done by a shop and dyno tuning.
Do you guys have any one to build the transmissions UP to handle the boost
Andre Wilson we have has zero issues with transmissions. How much power are you looking to make? There are a few places building the 5 and 8spds
450 reliably with no issues. So I really want to make sure the transmission can handle it. I've seen some v6 supercharged and they've had issues with the transmissions over heating
Andre Wilson at this point we have sold over 7000 Pentastar kits for Jeep Wranglers and Grand Cherokee. We have a less than a 1% drive train or engine issue over a 10 year span of kit sales.
RIPP Superchargers come on RIPP, I loved your kit but that’s a ridiculous claim. LESS then 1% failure rate in the past 10 years.. 😐 how would you even collect this type of information? The truth is adding boost just decreases the life of your vehicle. Out of the 5-6 people I know with this kit it’s been nothing but head gaskets, transmissions, and tuning issues nobody seems to be able to fix. That’s just the name of the game when you’re adding power but quit it with the less then 1% bullshit.... Just get the v8 like everyone else ends up doing anyways
I don't believe you! Give me the names of the people you claim are having these issues. You sound like a troll!
definitely doin dis to my 2018 300
how much does it cost generally to sc cars with a 3.6?
www.rippmods.com/products/2011-2014-chrysler-300-supercharger-system
So can I put a twin supercharger on my 2013 chrysler 300 3.6
The one supercharger has 800hp capacity... we would not waste our time putting two Superchargers on.. we'd build thr engine and install a 1000hp supercharger 😉
Work on base model 2013 chrysler 300?
Sweeiii Master yes
Could i get a link? Really been looking forward for you guys to get this one out!
Sweeiii Master www.rippmods.com/products/2011-2017-chrysler-300-supercharger-system
Could I install this on my 2013 Chrysler 200 s? It has the same engine but it's front wheel drive
eduardo medina no sorry this kit will not work.
@@RIPPMODS can you guys please try to work on that! I know it will be tough with that 9speed transmission. But its a good car thats need the patience of a true tuner. Which is why i watch this channel.
PLEASE MAKE AN APPLICATION FOR THE CHRYSLER 200 3.6L PENTASTAR!!!!!
This v6 shit is fun ima be a sleeper soon
Still no SC for 3.7 mustangs? =[
Do you have a kit for the 3.5 L V6
red dragon No sorry, we do not support that engine.
Where are you guys located? I want my car to get supercharged and tested by you all
Please visit www.rippmods.com for more information or email sales@rippmods.com for more details. We have dealers all over the world, check out our dealer link.
How much does this mod cost for a 2013 300 3.6
rippmods.com/collections/chrysler-300/products/2011-2014-chrysler-300-supercharger-system
I have a 2015 300s AWD, how will it work with my car?
chris rooney perfectly, there are lots of AWD cars that are RIPP Supercharged
RIPP Superchargers can u still switch it into sport mode & what would be the whp to all 4 wheels?
Yes - its just like stock with more power.
ua-cam.com/video/ZS2yF9dAkkU/v-deo.html&lc=z23bwblq5nfdgjzsbacdp4343g1gjr2xq2j3fqivhc5w03c010c.1534478656442713
Hey I’m really interested! I have a 2013 Chrysler 300C AWD. I know there’s a differential thing... but will this work on my car?
Yes, works of AWD Challenger, Charger and 300 with V6 Pentastar
I have a 2018 300 how much is the kit
Please visit www.rippmods.com for more information on your vehicle or email sales@rippmods.com for more details. Parts and prices are on our site along with a few options 👍
Would this work for my 2012 Chrysler 300s V6 model?
Yes please visit www.rippmods.com for more information on your vehicle or email sales@rippmods.com for more information
Can this be done to a 2010 Chrysler 300 3.5L awd
Sorry, we do not support the 3.5.
Can it make it to 500
The compressor we provide for these kits is rated to 800hp - So if you commit to building the rest of it, it can do 500 wheel. However, keep in mind that we display Wheel HP and not Crank. At the crank this is over 500hp.
Anyway I can fit 1 of these bad boys under the hood of my Chrysler 200?
They cannot due to the transverse mounting of the engine in FWD cars.
Does ur kit work for a 5.7l v8 300s
Sorry we do not have a system at this time.
@@RIPPMODS thank you
You’re making a v8 guy turn his head and say oooh what’s this light weight beauty
Where are u located
Hello, please visit www.rippmods.com for more information or email sales@rippmods.com for more details
How much does this package cost?
Please visit www.rippmods.com for more information on your vehicle or email sales@rippmods.com for more details
Any kits for 2012 300 5.7 l hemi
We do not produce a supercharger kit for this vehicle.
I really want to do this to my '18 Challenger. Problem is i dont want to void my warranty, so i think ill wait.
Who installs this in Houston Texas
Check out our dealer page, we have a few installers in Houston.
rippmods.myshopify.com/apps/store-locator
Heck yea that’s for letting me know about this on yalls Instagram! Great help! Y’all don’t do sponsorships do you?
Where do I shop
Better yet do guys do anything on the 300c 2011
Please visit www.rippmods.com for more information on your vehicle or email sales@rippmods.com for more details
@@NflDmac yes check out this video
ua-cam.com/video/7XDQWxDkO_s/v-deo.html
Awesome
I want that on my 2021/2022 durango GT
Allowed in Germany ?
Yes, we have two vendors in Germany - please contact sales@rippmods.com
What’s the price in total?
Email sales@rippmods.com for more info
This man is a God
I understand that for the '17 and '18 300 the kits are NOT 50 state legal, Why? I just purchased an '18 300s and I was wondering about some performance upgrades, and I came across you guys. Impressed enough, I'm was thinking seriously about purchasing a kit, but when I read that these kits (for my model year) are not legal, I took a step back. Any word on when these are going to be CARB approved?
The process for legalizing it is in motion, from a technical standpoint the cars are the same. From the CARB standpoint they need to be tested differently and will td ake a little longer to pass. We anticipate it will be legalized 2019 but cannot speak for the CARB offices ability to process it.
Dope!
Who else noticed he said C then S after the intro?
Do mine next
2018 300S
Hello, please visit www.rippmods.com for more information on your vehicle or email sales@rippmods.com for more details
Is there anything coming for the Wrangler JL?
manbeastx69 yes
I want to do this to my 13 Varvatos
Let’s supercharge my 2013 5.7 300
Not a 2015! Made 266 ! Not 240
I thought it was gonna whine
Im still waiting on a Avenger
Unfortunately it's too tight
I wish yall was in Georgia I have a Chrysler 300c v6
We have dealers in Georgia contact info@rippmods.com they can help