▶▶▶▶For D8s - PURCHASE HERE ▶ua-cam.com/video/VVfRnyKq8Cs/v-deo.html Xtool D8s Full review ▶ua-cam.com/video/BnVkrsvtIlo/v-deo.html Xtool D8s Quick review ▶ ua-cam.com/video/SjvqDyiPhpo/v-deo.html Xtool D8s Unboxing ▶▶ link to the key I used to program for my Dodge Grand Caravan amzn.to/48eCiXb ▶▶▶Link to recommend vendor D8s amzn.to/3OJ8SsJ ▶▶8% off promote code: F97POTI2 ▶email address for Xtool supporting@xtooltech.com
I’m glad to hear the video helped with your 2012 Prius. I’ve see. Your dealership before when I lived in the Bay Area. I think you had many Toyota vehicles, including the Prius when I was looking for a good deal last year. Thanks again for sharing your experience.
I did watch the video about updating any scanner out there. However, I’ve been trying the same thing with techscream software and I’m getting the same error and way back. I’ve been using techcream to program remote start on my 2015 Toyota Venza successfully.
Thank you for your helpful video. I have been trying to program immobilizer in my 2012 Toyota Camry with XTool D8 and I was unsuccessful. I’m getting error code B2794. Is this indication that the immobilizer and the key what I have been trying to program is bad? I did scan the vehicle before programming and there was no DTC codes.
For my Toyota I used a Otofix / Autel tool. There is not one scan that can do everything. Also, things have changed and many scan tools in the usa may support key programming, check here ua-cam.com/video/g7WcYbv4q0s/v-deo.htmlsi=ShMPIGCPPdGKId6H
I have the same D8 but I can't program my new key fob to my 2017 ram 1500 for some reason? it won't let me extract the pin code from the vehicle like it did yours it doesn't give me that option? If you know why, or you can do a video on a ram 1500 4th generation, that would be great?
No worries, it’s 11 dollars for a new key and yes it works. The computer even confirms the number of keys. I show even in this video here ua-cam.com/video/nTninTEbdYA/v-deo.htmlsi=KBqGLSOi0KXWLE9-
I have D7 and it works fine on all keys i tried to program. Very easy on my C-RV’s 02~05. I even cut them myself. I also used it on my son’s Nissan Frontier 2011. The sweaty moment came when it said “erase all keys”! 😮 My son told me go ahead dad, and it worked like charm. I read the pin, and It asked me whether to enter it manually, but I chose automatic . There is PIN code calculator in the software, but evidently it did it on its own. It worked. I had to enter the original key, and the two new keys. All of them worked afterwards. The new keys were fob keys, and fob was easy to pair. Plenty of videos on UA-cam . It was not “rocket science” though!
Hello i bought this Scanner but the one with the Bluetooth device when i tried to Program my Jeep Compass 2020 didn’t work because it Shows this message: “Maké sure the Chryster SGW cable(L101) is available and can’t do anything but reading Codes with it Cant even erase codes or anything Scanner its useless without that damn wire
@@RANDOMFIX I did a auto locksmith course but still searching a starting point what should I do as not getting enough clarity from where to start. If possible can you suggest or guide me. Thanks
@VishalSuri_love_aim_live_life I know not much about locksmithing as their is the automotive side and the residential. From working at dealerships over 20 year I know I paid them I a lot of money each month and they made it look like hard work but honestly these electronic keys are not that bad. My one suggestion to you is just know that not one unit will work for all vehicles so don’t pay for a $$$$ expensive scan tool but instead start slow and get two 300 to 500 devices as you will have better coverage. Make sure one of the units is Autel like this one ua-cam.com/video/D5TMb4PupOk/v-deo.htmlsi=0f4M1Tul7h6noCaz and the other unit could be a xtool d7s or d8s like in this video. Good luck on your journey to becoming a locksmith and I’m hear to help. When you get into business make sure you land a few small dealership accounts they will keep you busy and give you lots of practice
Toyota Dealer Parts Dept will give you the PIN with your proof of registration and DL. No charge. I've heard the Chrysler/Stellantis vehicles are very hard to get into with almost any scanner. Personally I always use Toyota OEM keys - just don't trust those Chinese knockoffs. Good vid though, I'm leaning toward a D8S myself.
I have had no issue with my Chinese knockoff key and but having to go the Toyota dealer can take a lot of time. I doubt they can verify your id on the phone. The closest dealer to me 1 hour away. That's a lot of time and fuel wasted. Get yourself the D8S and your will be happy! Honestly the D7S is just as good.
Does the D7S have the same capability for this fob programming function? I have a 2024 Acura RDX base and wondering if it will work on a newer Acura. Thank you
You do realize that you can get the pin from the dealer and use any of these tools, right? Hardly a "defect", just a minor omitted inconvienience . . .
Thank you sharing your thoughts. I haven’t tried calling the dealership but most of the time I call to even order a part I can barely get a hold of human. Do they require id and registration to give you the pin? Is it free?
▶▶▶▶For D8s - PURCHASE HERE
▶ua-cam.com/video/VVfRnyKq8Cs/v-deo.html Xtool D8s Full review
▶ua-cam.com/video/BnVkrsvtIlo/v-deo.html Xtool D8s Quick review
▶ ua-cam.com/video/SjvqDyiPhpo/v-deo.html Xtool D8s Unboxing
▶▶ link to the key I used to program for my Dodge Grand Caravan amzn.to/48eCiXb
▶▶▶Link to recommend vendor D8s amzn.to/3OJ8SsJ
▶▶8% off promote code: F97POTI2
▶email address for Xtool supporting@xtooltech.com
Thank you for this video! I just made a key for my 2012 Toyota Prius! Very helpful
I’m glad to hear the video helped with your 2012 Prius. I’ve see. Your dealership before when I lived in the Bay Area. I think you had many Toyota vehicles, including the Prius when I was looking for a good deal last year. Thanks again for sharing your experience.
I did watch the video about updating any scanner out there. However, I’ve been trying the same thing with techscream software and I’m getting the same error and way back. I’ve been using techcream to program remote start on my 2015 Toyota Venza successfully.
Yep, definitely saw your pin. Thanks for the video! Very helpful!
Thanks for the heads up, I covered it better now. Should be unreadable now.
cant do anything if you see the pin anyways
i think you freaking out for nothing 😅
Thank you for your helpful video. I have been trying to program immobilizer in my 2012 Toyota Camry with XTool D8 and I was unsuccessful. I’m getting error code B2794. Is this indication that the immobilizer and the key what I have been trying to program is bad?
I did scan the vehicle before programming and there was no DTC codes.
For my Toyota I used a Otofix / Autel tool. There is not one scan that can do everything. Also, things have changed and many scan tools in the usa may support key programming, check here ua-cam.com/video/g7WcYbv4q0s/v-deo.htmlsi=ShMPIGCPPdGKId6H
Great video, thanks
No problem 👍
Will D7s do it as well?
Does it program fobs for push button start aswell?
Yes, of course.
@@RANDOMFIX ok thanks
Will this program newer ford keys 2020 and newer? Mainly a bronco or fusion
So do you need the original key when programming the new key?
Yes, you need a working key 🔑
Because it deters theft. Think about it
If you can programme a key with just the diagnostic tool then why does Xtool sell so many separate key programming units?
I have the same D8 but I can't program my new key fob to my 2017 ram 1500 for some reason? it won't let me extract the pin code from the vehicle like it did yours it doesn't give me that option? If you know why, or you can do a video on a ram 1500 4th generation, that would be great?
Don't get me wrong but until I see the new key successfully locking, unlocking and starting the car - I don't believe it :)
No worries, it’s 11 dollars for a new key and yes it works. The computer even confirms the number of keys. I show even in this video here ua-cam.com/video/nTninTEbdYA/v-deo.htmlsi=KBqGLSOi0KXWLE9-
I have D7 and it works fine on all keys i tried to program.
Very easy on my C-RV’s 02~05.
I even cut them myself.
I also used it on my son’s Nissan Frontier 2011.
The sweaty moment came when it said “erase all keys”!
😮
My son told me go ahead dad, and it worked like charm.
I read the pin, and It asked me whether to enter it manually, but I chose automatic .
There is PIN code calculator in the software, but evidently it did it on its own.
It worked.
I had to enter the original key, and the two new keys.
All of them worked afterwards.
The new keys were fob keys, and fob was easy to pair. Plenty of videos on UA-cam .
It was not “rocket science” though!
does it read thru obd 2 without turning ignition on
For any basic obd2 or scan tool the ignition has to on or engine running.
Why do you ask?
Hello i bought this Scanner but the one with the Bluetooth device
when i tried to Program my Jeep Compass 2020 didn’t work because it Shows this message:
“Maké sure the Chryster SGW cable(L101) is available
and can’t do anything but reading Codes with it
Cant even erase codes or anything
Scanner its useless without that damn wire
Can you program a used OEM 🔑 or does it have to be a brand new unregistered 🔑.?
Hope to get a reply. Thank you.
I used an unbranded key that I got for 11 dollars, link to keybis in the video description
d8s is compatible with kc501 or no
Yes u can work on kc501 on xtool d8s
Why the heck would you buy a $11 key?
How many scan tools did you buy? Just to program a $11 Caravan Key, that key has just turned into a lot of money wasted
Are you an auto locksmith? As what should be used instead of this must comment so other can see and understand
lol, I test a lot of scan tools and have lots of them.
@@RANDOMFIX I did a auto locksmith course but still searching a starting point what should I do as not getting enough clarity from where to start. If possible can you suggest or guide me. Thanks
@VishalSuri_love_aim_live_life I know not much about locksmithing as their is the automotive side and the residential. From working at dealerships over 20 year I know I paid them I a lot of money each month and they made it look like hard work but honestly these electronic keys are not that bad. My one suggestion to you is just know that not one unit will work for all vehicles so don’t pay for a $$$$ expensive scan tool but instead start slow and get two 300 to 500 devices as you will have better coverage. Make sure one of the units is Autel like this one ua-cam.com/video/D5TMb4PupOk/v-deo.htmlsi=0f4M1Tul7h6noCaz and the other unit could be a xtool d7s or d8s like in this video. Good luck on your journey to becoming a locksmith and I’m hear to help. When you get into business make sure you land a few small dealership accounts they will keep you busy and give you lots of practice
Toyota Dealer Parts Dept will give you the PIN with your proof of registration and DL. No charge. I've heard the Chrysler/Stellantis vehicles are very hard to get into with almost any scanner. Personally I always use Toyota OEM keys - just don't trust those Chinese knockoffs. Good vid though, I'm leaning toward a D8S myself.
I have had no issue with my Chinese knockoff key and but having to go the Toyota dealer can take a lot of time. I doubt they can verify your id on the phone. The closest dealer to me 1 hour away. That's a lot of time and fuel wasted. Get yourself the D8S and your will be happy! Honestly the D7S is just as good.
Does the D7S have the same capability for this fob programming function? I have a 2024 Acura RDX base and wondering if it will work on a newer Acura.
Thank you
Your code can be seen
Okay I will cover again.
You do realize that you can get the pin from the dealer and use any of these tools, right? Hardly a "defect", just a minor omitted inconvienience . . .
Thank you sharing your thoughts. I haven’t tried calling the dealership but most of the time I call to even order a part I can barely get a hold of human. Do they require id and registration to give you the pin? Is it free?
Lets count how many times he said "we're gonna go ahead" I hear this alot when people talk with a camera recording...
Thank you for the feedback