Thank you for this video. I have watched your videos all morning. I have to get away from making tumblers with epoxy. I have become allergic to all epoxy. I have tried 5 or 6 epoxy and no luck. Plus I do not like that it is harmful.... I wanted to learn about this product but was getting overwhelmed not truly understanding the process. So again thank you
Hi Alison. I was wondering could you recommend another type of sealer for the glitter? Currently I’m using epoxy and want to make the switch to Brite tone and I’m currently using a clear gloss spray paint sealer. Could I still do this when using Brite tone ? Thanks
You can use clear spray paint but it needs to dry 48 hours before moving on with brite tone but totally still usable! Many of us use E6000 pump spray instead because it needs less time to dry.
If I seal with the glitter glue will the last coat still be a little sticky. If so can I still apply the brite tone over if it’s still a bit sticky? Also does hang dry mean take it completely off of the turner or can I leave it on the turner and just stop spinning?
Roughly how many MLs do you think you put use each time to cover this cup? I know you don't measure crystalac but i'm curious. I take 10 coats to get over the glitter to be able to do a decal. I think i'm doing something wrong.
Usually about 2 mls. The first few layers over glitter a little more. I always seal my glitter with E6000 and flatten it too. Chunky glitter does take a lot though.
Hi! Can I used this method to seal a glitter rolling tray, or is there anything out there that gives glass like finish like epoxy? I just want a smooth high shine finish so you can't feel the glitter.
So u have 2seal bout 10 times every 2 to 4 hrs, with the brite tone/xtreame protection But does tht include the whole process like glitter, decal ect..??
I've seen that the Crystalac takes 30 days to fully cure, how would you handle sending them to your customers when they are done? Do you use a disclaimer that to use gently for the first 30 days? Or is the product decently durable through those 30 days? The epoxy I use now is full cure in 3 days so I hold cups for that time period.
I hold cups for 5 days then pass them on. They're definitely durable before 30 days but a lot of people say gentle use up until xx/xx. I use all of my personal ones after 5 days and have never had an issue!
Your videos are so helpful! Thank you! I've been trying to determine if E6000 is non-toxic, given that it is being used on a tumbler (even though it is sealed by Brite Tone). It looks like Crystalac also makes a certified non-toxic glitter adhesive, so I'm wondering if you think that would be an acceptable alternative for E6000, if it turns out that E6000 is not certified as non-toxic. Thanks!
Yes I no longer use the E6000 Pump Spray and only use the Glitter Glue! thecrystalacstore.com/products/crystalac-glitter-glue?_pos=1&_sid=394ae612c&_ss=r&&sca_ref=301559.RjXXsfrXmN
I just followed this tutorial. I love your videos!!! . I just started my very first tumbler. I put bright tone. Then a chunky mix with fine. But.... I need a bit more glitter on my tumbler. Can I do the e6000 spray after 4 hours of course. Then e600 and glitter again right away to get more glitter on it?
couple of questions: I see you are wearing a glove, do you need to wear with extreme protection? Also, how are you going to make sure that it is sealed without leaving a bit of a line on top? I am confused by the different ways to make sure it is sealed, when you go trim off the lip.
No need to wear gloves, i just dont like to get dirty sometimes LOL it rinses off super easily! You don't need a lip at the top, the crystalac adheres to the layer below it so as long as your paint is adhered to the cup, the crystalac will adhere to the paint.
Hi there just found you and watched your video thank you for all the information! I do have a question if I’m applying glitter to my tumbler but need to spray paint w color first do I sand paper the tumbler then spray paint then can I just add the e6000 spray to add glitter ? And then use crystalac to finish for sealing ? And if yes where can I get crystalac? Thanks so much :)
You need to prep your tumbler first! Let your spray paint dry 48 hours and then you can move onto using your crystalac products. Here is a linK: thecrystalacstore.com/collections/clear-top-coats/products/brite-tone-instrument-finish?sca_ref=301559.RjXXsfrXmN
I can't say for sure without knowing what it is but i can say that anything from an aerosol can has to off-gas for 48 hours before using CrystaLac products!
I recently switched over to write tone. but I have a weird questions. have you put crystalac on top of epoxy. so I used the last bit of epoxy on a cup but have been using brite on my new orders. I need to do one more coat on the one with epoxy could I do brite tone on top of that
I have put crystalac over epoxy! the Epoxy needs to be fully cured which can take up to 30 days so just make sure you wait first. But once it's cured, you can give it a light sand and add the brite tone!
Hi! Question is it possible to get a glass like finish with the BT? I used to use epoxy before and I really loved the smooth glass like finish it gave me. I've been trying out the BT and EP but I'm not seeing the results that epoxy gave me. 😒
I personally have been getting a glass like finish so I know it's possible! Let's see if we can get you to have that too! What do you notice is different about your cups?
If I want to add chunky glitter after the layer of fine glitter (I already added two layers of the fine with modge podge and E6000’d it lol) do I add a few layers of EP/BT then the chunky? Or can I go in with modge podge and e6000 again THEN start my crystalac layers? TIA!
Absolutely! Just make sure you let dry for about 48 hours before you start coating with Crystalac. That's the only reason to use the e6000 instead... Less wait time!
Also I’m not sure if it is possible or not but can you use acrylic paint to dye the EP or brite tone? I really want to make one of the Milky Way tumblers. Can you do that with these products?
I just applied Brite tone to my Starbucks tumbler and applied glitter but I missed a few spots with the Brite tone , should I apply more right always or let it spin for an hr? Then apply more Brite tone/glitter in the missing spots it’s my first time doing this 😩
definitely let it dry for 4 hours before you do anything! you can either apply more brite tone and add more glitter or you can actually use the E6000 spray if you have any. Some people like to do it that way! Here is an updated video of how i apply my glitter: ua-cam.com/video/UmrUj82Cup0/v-deo.html
I would add a decal and if not more crystalac it just does not seem to have that glossy shine to me I know sometimes videos and pic just do not do our pieces justice and maybe that is the case here maybe a dried cup removed from turner might have been a better presentation.sorry but I am one of those painfully honest ppl.
You have the best videos. Very informative. Thank you for sharing. ❤❤❤
Aww you're so nice! Thank you 💖
Soooo beautiful!! I’d probably do a super cute font one letter decal in white or a silver holographic color 😍💜
Ooooh one letter decal, love it!!! I was also thinking white!
I love your videos thank you so much for sharing your talents with us.
Would love to see how you made your tumbler turner sometime Thanks
Aw thank you!!! I will definitely share it... It was very easy!
Crafting the Good Life can’t wait I will be watching for it . Keep up the great work
Thank you for this video. I have watched your videos all morning. I have to get away from making tumblers with epoxy. I have become allergic to all epoxy. I have tried 5 or 6 epoxy and no luck. Plus I do not like that it is harmful.... I wanted to learn about this product but was getting overwhelmed not truly understanding the process. So again thank you
Hi Alison. I was wondering could you recommend another type of sealer for the glitter? Currently I’m using epoxy and want to make the switch to Brite tone and I’m currently using a clear gloss spray paint sealer. Could I still do this when using Brite tone ? Thanks
You can use clear spray paint but it needs to dry 48 hours before moving on with brite tone but totally still usable! Many of us use E6000 pump spray instead because it needs less time to dry.
Do you think a old fashion can of Aqua Net would seal the glitter? It worked great for epoxy but I’m not sure how it will work with BT.
The problem is that that stuff will yellow over time but you can certainly try it
Can you seal a tumbler with Crystal clear glossy finish?
What’s difference between extreme protection and top coat crystalac
If I seal with the glitter glue will the last coat still be a little sticky. If so can I still apply the brite tone over if it’s still a bit sticky? Also does hang dry mean take it completely off of the turner or can I leave it on the turner and just stop spinning?
yes it dries tacky and will need brite tone on top! You can leave it on the turner or not use a turner at all!
So the amount of EP we see you using in this video is the amount we should be using for all layers? Same with BT? It seems like way more than 2ml.
The first few coats I use closer to about 3-4 but by the end 1.5-2. Just use as little as possible!
Roughly how many MLs do you think you put use each time to cover this cup? I know you don't measure crystalac but i'm curious. I take 10 coats to get over the glitter to be able to do a decal.
I think i'm doing something wrong.
Usually about 2 mls. The first few layers over glitter a little more. I always seal my glitter with E6000 and flatten it too. Chunky glitter does take a lot though.
Best video so far (I have watched dozens)!!!! Thank you for being precise and on point without all of the chit chat
You're so kind 💖 I'm glad I could help!
Hi! Can I used this method to seal a glitter rolling tray, or is there anything out there that gives glass like finish like epoxy? I just want a smooth high shine finish so you can't feel the glitter.
So u have 2seal bout 10 times every 2 to 4 hrs, with the brite tone/xtreame protection
But does tht include the whole process like glitter, decal ect..??
You coat every 4 hours and on average a cup takes me about 12-15 coats start to Finish
@@AlisonCrafts ah.
Ok cool.
Ty
Beautiful cup Alison,do you put the extreme glitter on thicker before adding glitter?
I prefer to use Brite Tone to adhere my glitter 😊
I've seen that the Crystalac takes 30 days to fully cure, how would you handle sending them to your customers when they are done? Do you use a disclaimer that to use gently for the first 30 days? Or is the product decently durable through those 30 days? The epoxy I use now is full cure in 3 days so I hold cups for that time period.
I hold cups for 5 days then pass them on. They're definitely durable before 30 days but a lot of people say gentle use up until xx/xx. I use all of my personal ones after 5 days and have never had an issue!
Your videos are so helpful! Thank you! I've been trying to determine if E6000 is non-toxic, given that it is being used on a tumbler (even though it is sealed by Brite Tone). It looks like Crystalac also makes a certified non-toxic glitter adhesive, so I'm wondering if you think that would be an acceptable alternative for E6000, if it turns out that E6000 is not certified as non-toxic. Thanks!
Yes I no longer use the E6000 Pump Spray and only use the Glitter Glue! thecrystalacstore.com/products/crystalac-glitter-glue?_pos=1&_sid=394ae612c&_ss=r&&sca_ref=301559.RjXXsfrXmN
I just followed this tutorial. I love your videos!!! . I just started my very first tumbler. I put bright tone. Then a chunky mix with fine. But.... I need a bit more glitter on my tumbler. Can I do the e6000 spray after 4 hours of course. Then e600 and glitter again right away to get more glitter on it?
Yes you can!
couple of questions: I see you are wearing a glove, do you need to wear with extreme protection? Also, how are you going to make sure that it is sealed without leaving a bit of a line on top? I am confused by the different ways to make sure it is sealed, when you go trim off the lip.
No need to wear gloves, i just dont like to get dirty sometimes LOL it rinses off super easily! You don't need a lip at the top, the crystalac adheres to the layer below it so as long as your paint is adhered to the cup, the crystalac will adhere to the paint.
Hi there just found you and watched your video thank you for all the information! I do have a question if I’m applying glitter to my tumbler but need to spray paint w color first do I sand paper the tumbler then spray paint then can I just add the e6000 spray to add glitter ? And then use crystalac to finish for sealing ? And if yes where can I get crystalac? Thanks so much :)
You need to prep your tumbler first! Let your spray paint dry 48 hours and then you can move onto using your crystalac products. Here is a linK: thecrystalacstore.com/collections/clear-top-coats/products/brite-tone-instrument-finish?sca_ref=301559.RjXXsfrXmN
Do you have to use the E6000 or any clear spray adhesive?
You can use E6000 pump spray or clear spray paint as long as you wait the proper dry time!
Quick question do you have to be in a heated room like you do for epoxy?
Best to be at about 70° but the product will work between 60-80
Can you use mod podge for sticking the glitter? Is it ok to use with the crystalac?
Absolutely! Just give it extra drying time before dealing.
Which type of spray paint is the best to use as a base coat on a tumbler? Gloss, Flat, Matte, Satin?
It doesn't really matter but I prefer matte or semi gloss
@@AlisonCrafts Thank you
I saw a glitter sealant at ACE hardware, would that would instead of the e6000?
I can't say for sure without knowing what it is but i can say that anything from an aerosol can has to off-gas for 48 hours before using CrystaLac products!
I recently switched over to write tone. but I have a weird questions. have you put crystalac on top of epoxy. so I used the last bit of epoxy on a cup but have been using brite on my new orders. I need to do one more coat on the one with epoxy could I do brite tone on top of that
I have put crystalac over epoxy! the Epoxy needs to be fully cured which can take up to 30 days so just make sure you wait first. But once it's cured, you can give it a light sand and add the brite tone!
@@AlisonCrafts thank you
How well does this hold up compared to epoxy and is it food safe thank you.
Cures harder than epoxy. Completely food safe, as these are water based products.
Hi! Question is it possible to get a glass like finish with the BT? I used to use epoxy before and I really loved the smooth glass like finish it gave me. I've been trying out the BT and EP but I'm not seeing the results that epoxy gave me. 😒
I personally have been getting a glass like finish so I know it's possible! Let's see if we can get you to have that too! What do you notice is different about your cups?
If I want to add chunky glitter after the layer of fine glitter (I already added two layers of the fine with modge podge and E6000’d it lol) do I add a few layers of EP/BT then the chunky? Or can I go in with modge podge and e6000 again THEN start my crystalac layers? TIA!
I usually add a few bt layers before i add my chunky. and i add it with BT.
Could you seal the glitter with clear spray paint instead of the e6000?
Absolutely! Just make sure you let dry for about 48 hours before you start coating with Crystalac. That's the only reason to use the e6000 instead... Less wait time!
Hi does the 6000 spray have a strong smell? I've used the glue and it was so strong I got a migraine.
to me, very minimal smell. wayyyyyy less odor than mod podge in my opinion.
@@AlisonCrafts thank you so much :)
How did you get the chunky glitter to cover the bottom of the cup?
Just make sure you have your Brite Tone on the bottom of the cup and pour the glitter into the bottom!
Do you need both the EP and the BT? Or is just BT okay?thank you in advance
Just BT is all you need!
Alison Crafts awesome thank you! 😁
What should I get I’m a beginner and does it work on fabric
You can definitely make fabric tumblers! Here is a video of my recommendations on what to buy ua-cam.com/video/Pt9ugSTP1NM/v-deo.html
Could you use a clear seat paint instead of the e6000?
Yes! Just needs to dry 48 hours!
Also I’m not sure if it is possible or not but can you use acrylic paint to dye the EP or brite tone? I really want to make one of the Milky Way tumblers. Can you do that with these products?
Where did you buy the extreme protection and bright tone?
thecrystalacstore.com/collections/clear-top-coats/products/brite-tone-instrument-finish?sca_ref=301559.RjXXsfrXmN
Your name in purple 😍
Does it matter what type of spray paint is used? Flat, satin , matte semi gloss or gloss? TIA 😊
I prefer flat but it doesn't really matter.
Alison Crafts thank you ! Flat is becoming so hard to find.
How long does it take to make a tumbler from beginning to end?
It really depends on how much time you can dedicate to your tumblers and the type of tumbler
I just applied Brite tone to my Starbucks tumbler and applied glitter but I missed a few spots with the Brite tone , should I apply more right always or let it spin for an hr? Then apply more Brite tone/glitter in the missing spots it’s my first time doing this 😩
definitely let it dry for 4 hours before you do anything! you can either apply more brite tone and add more glitter or you can actually use the E6000 spray if you have any. Some people like to do it that way! Here is an updated video of how i apply my glitter: ua-cam.com/video/UmrUj82Cup0/v-deo.html
Alison Crafts thank you so much ! I’ve been binge watching your videos 🙂 love your work !
do i let the e600 dry after i spray it ? or do i immediately wrap it
oh nvm ,, u said the answer in the video 😂
@@mayita5641 lol! I wait about 45 mins - 1 hour now before I wrap it!
Is this brand FDA compliant
Yes. The FDA does not regulate top coats but they do provide recommendations for companies. The CrystaLac Company exceeds these recommendations.
What are the care instructions compared to an epoxy tumbler .
They're the same! Handle with care, don't drop, no dishwasher, no microwave, hand wash, don't soak, etc.
How long after using Crystalac is it safe to drink from and put your mouth on?
I wait about 5 days before i use it but it's fine once it's dry
Where do you get your tumblers?
I get mine from stainless steel depot! She runs good sales/free shipping once and a while if you're on the email list!
I would add a decal and if not more crystalac it just does not seem to have that glossy shine to me I know sometimes videos and pic just do not do our pieces justice and maybe that is the case here maybe a dried cup removed from turner might have been a better presentation.sorry but I am one of those painfully honest ppl.
This video is very old and more about the process of how to apply chunky glitter. Check my other vids and instagram for more updated content 🥰🥰