Gorgeous HASSELBLAD T/S VIEW CAMERA | 7 Components

Поділитися
Вставка
  • Опубліковано 29 жов 2024

КОМЕНТАРІ • 42

  • @RS-Amsterdam
    @RS-Amsterdam 2 роки тому +6

    Love this "Frankenstein" combi.
    Great explanation, all crystal clear.
    Thanks for sharing !

    • @mathphotographer
      @mathphotographer  2 роки тому

      Thanks RS - I enjoyed this 7 component camera a lot :)

  • @NikCan66
    @NikCan66 2 роки тому +1

    this video is phenomenal set up for architectural and some limited street photography

    • @mathphotographer
      @mathphotographer  2 роки тому

      Thanks! It was really fun shooting the camera in this particular setup :)

    • @NikCan66
      @NikCan66 2 роки тому

      @@mathphotographer great vlog

  • @nelsonclub7722
    @nelsonclub7722 2 роки тому +1

    I used to use EXACT same setup for architecture - top tips - get the HTS shoe for expanded capability which slots into the Hass tripod adaptor niceley - you can also 'twist' or 'rotate' the HTS adaptor. Once composed take a picture of the whole scene , bracketed if necessary for the sky only. then get a Lee Big or Little Stopper (6 or 10 stops) take another picture at fully closed aperture - the result will be that the exposure is so long that people move but are not recorded so there will be no people in your shot - then blend in the sky in post. I now just use 'transform' and the tilt and shift in post after stitching 9 or more bracketed panos on a Leica S3 - cheaper and easier and more importantly properly weather sealed which the Hass is not - the Hass has one major design flaw - the catch on the top is easily pressed especially if used with a shoulder strap. The back can rub against anything and then falls to the ground!!!! Even more likely if inverted - ie lens facing up. Another option - though more expensive is to use the Hasselblad ARC Body - no vignetting with any of the 3 lenses due to the crop factor

    • @mathphotographer
      @mathphotographer  2 роки тому +1

      Great comment, thanks!

    • @andyvan5692
      @andyvan5692 Рік тому

      @@mathphotographer I have one solution to the ' button ' problem, on the 907x control grip add a video cage, this covers the button, but ALSO adds 1/4"-20 and 3/8" screw threads, so you can add a connector to fasten the phone to the camera, no need to 'magic arm' it to the tripod leg!

  • @petergregory7199
    @petergregory7199 2 роки тому

    This set up harks back to the old plate cameras of the 19th century. That’s when photographs had to be set up very carefully and you had a wooden box of glass plates and a rotating lens and back to give you a variable plane of focus. What you gain and lose with the adjustments is all swings and roundabouts. Do you know the work of Thomas Streuth? The trick is to find a way of using science to make art. And of course you need deep pockets as well!

  • @madtom67
    @madtom67 2 роки тому

    Very nice! Thanks for sharing!

  • @propylaeen
    @propylaeen 2 роки тому

    What a great setup

  • @usi9fl
    @usi9fl 2 роки тому

    Very well done, I use the 907 X also. Who is the vendor for the clamp you hold the IPhone with?

  • @user-ms8qg2rz5s
    @user-ms8qg2rz5s 2 роки тому

    Master Leica should consider to make this kind of TS adapt for their SL and larger format camera

    • @nelsonclub7722
      @nelsonclub7722 2 роки тому

      this will fit to the Leica S3 using another adaptor !!!

  • @LucyS565
    @LucyS565 2 роки тому

    WOW! Excellent image quality! What an amazing camera! Superb combination and review! Well done!

  • @jean-claudemuller3199
    @jean-claudemuller3199 2 роки тому

    Using the H to X converter enhances the FOV on the X sensor image but reduces the resulting optical image circle, meaning less shifting before vignetting than with the H to X adapter without focal length reduction (smaller FOV and greater image circle)
    It would be very interesting comparing the same image with the H to X converter to the H to X adapter with a greater shooting distance to compensate the focal distance difference to the converter. 😉

  • @usi9fl
    @usi9fl 2 роки тому

    Well done, I do use the 907X. Where did you purchase the phone holder?

  • @StreetMusicReportage
    @StreetMusicReportage 2 роки тому

    Would be possible to use the same adapter for ts-e u showed with the xd1ii and the ts-e 17mm?
    Thanks

  • @lnz971
    @lnz971 2 роки тому

    How does it compare to a canon 24 TSE adapted to that same camera body?

  • @derrickdu
    @derrickdu 2 роки тому

    That is a lot of work. Very interesting though. Me, I will just use the 45mm lens. Lol

  • @sundeane3970
    @sundeane3970 2 роки тому

    Nice camera setup. Can you manual zoom in/out in the phocus mobile?

  • @sovietmind
    @sovietmind 2 роки тому

    Thank you for this review. Can we use 2 or 3 XH converters together to get wider image?

    • @lnz971
      @lnz971 Рік тому +1

      God that stupidity...

  • @Isuperbad
    @Isuperbad Рік тому

    Have you tried the Fuji GFX and Canon 24mm TSE VII?

    • @mathphotographer
      @mathphotographer  Рік тому

      Yes I do shoot Canon TSE on my GFX100s, works very well.

  • @JMC0704
    @JMC0704 2 роки тому

    I was wondering if there’s a setup like this for my S007? I have the 35mm and 180mm. Thanks for all the info.

    • @nelsonclub7722
      @nelsonclub7722 2 роки тому

      HTS works upto HC150mm - there is an adaptor for S cameras - see Leica Shop

  • @jimb2500
    @jimb2500 2 роки тому

    Can you use it with flash?

  • @wolfrainerschmalfuss3515
    @wolfrainerschmalfuss3515 2 роки тому

    Beim besten Willen, ich habe noch nie den Auszug auch des "stablisten Stativs", so weit ausgefahren!

    • @mathphotographer
      @mathphotographer  2 роки тому

      Ha! :) I got this tripod just recently and I am super impressed how stable it is :)

  • @andyvan5692
    @andyvan5692 2 роки тому

    one problem with this system, the effective cone of view is NOT wide enough until it hits the camera body; so would make more sense, NOT to use the HTS1.5 (movements at this distance), but a tele-extender, and convert the lens set to V-system, THEN add the flexbody at this stage, where the tilt has a more effective operating area( using the cfvII50C alone, affixed to the flexbody).

  • @jean-claudemuller3199
    @jean-claudemuller3199 2 роки тому +1

    I can confirm that the lens collar used is not the original Hasselblad collar I use

    • @mathphotographer
      @mathphotographer  2 роки тому

      Agree - the original Hasselblad tripod clamp has a "Hasselblad" engraving if I am not mistaken, my one has only "XH" engraved :)

    • @唐金怀
      @唐金怀 Рік тому

      @@mathphotographer Where can i get this tripod mount ring?

    • @lnz971
      @lnz971 Рік тому

      With the hasselblad one the hts touch the feet when shift down...

  • @domipro123
    @domipro123 2 роки тому

    Maybe it was better to turn the camera in vertical position and shift horizontally...

    • @mathphotographer
      @mathphotographer  2 роки тому +1

      Indeed an option, and the vignetting is different in portrait versus landscape mode, also depending on how the lens itself is rotated, spot-on comment.

  • @propylaeen
    @propylaeen 2 роки тому +1

    Generally all city photography gets spoiled by cars and traffic signs and I still not used to see the super sharp photography of the latest state of camera gear it tend to be so hard and less of emotion.