How To Use a Touch Up Paint Pen to Repair Car or Truck Paint Scratches

Поділитися
Вставка
  • Опубліковано 3 січ 2022
  • Cómo utilizar un lápiz de pintura de retoque para reparar arañazos en la pintura de automóviles o camiones
    How To Use a Touch Up Paint Pen to Repair Car or Truck Paint Scratches
    Disclaimer:
    These videos are intended to offer general information working a car and tools.
    The Peter Finn have used best effort in creating the video. No liability can be accepted by the author and publisher for any expense, damage or injury caused by any errors in the information given. In no event shall author be liable for any direct, indirect damages or loss of profit by you or any third party.
    Due to factors beyond the control, I cannot guarantee against improper use or unauthorized modifications of this information. Peter Finn assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Peter Finn.
    Work carefully and safely. Also avoid accidents.
  • Авто та транспорт

КОМЕНТАРІ • 53

  • @ayne222
    @ayne222 9 місяців тому +3

    It went from bad to much worse then to perfect. I have doubts about the authenticity of this video :)

  • @Crevatsch
    @Crevatsch 2 роки тому +1

    Great explanation Peter!

  • @ditr257
    @ditr257 2 роки тому +1

    Excellent work Peter and nice result!!!

  • @DavidB-rx3km
    @DavidB-rx3km 2 роки тому +6

    I’m sure the water pad isn’t to clean it but to even out flatten the paint before you apply clear coat - the temperature and time guidelines are so it’s nearly dry and not tacky for that

  • @mirsadahmetspahic2511
    @mirsadahmetspahic2511 2 роки тому +1

    Great!

  • @davidc4679
    @davidc4679 2 роки тому +2

    Excellent tutorial. The results look perfect. Very simple does not need to be complicated. Thanks Peter keep up the excellent work.

  • @josefranciscoesquertalaman3827
    @josefranciscoesquertalaman3827 2 роки тому

    Cordial saludo desde Navojoa sonora México

  • @theempreror9608
    @theempreror9608 11 місяців тому +1

    Thanks for the tutorial. The KIA touch up set has exactly the same instructions. I only wonder if it is normal that after the base paint is applied and dries up you can still kind of see the crater. The height will only be normalized by the final touch up glaze that is meant to be transparent?

  • @kateescudero1315
    @kateescudero1315 Рік тому +1

    Wish there was a close up at the end of the touched up area - hoping expiry dates don’t really matter too much if product unopened as I hadn’t realised there was an expiry and I haven’t gotten round to doing mine yet 😂

  • @SuperDukes18
    @SuperDukes18 4 місяці тому

    Well here I am reading the comments after applying the final clear coat. Mine is Audi a5 with Daytona grey metallic pearl (from Audi/Volkswagen factory). My clear was not milky like this, otherwise the steps were easy to follow. I did a few small chips and will update with the results in 48 hours.

    • @PeterFinnTheCarDoctor
      @PeterFinnTheCarDoctor  4 місяці тому

      Great work 👍👍👍😀

    • @MeowImHh
      @MeowImHh 4 місяці тому

      Can you come with Update :)? I have a vw polo and i had the same set. I just applied the base coat and clear coat today but mine still looks weird, i assume it’s because i haven’t polished yet. Did you polish your car yet?

  • @TheJowes
    @TheJowes 10 місяців тому

    I bought this for my car Volvo and have not use it. So i look for an instrcution on UA-cam and found your instruction. It all looks perfect. However, as already noted, I see other scratches in the area around the previous spot and am therefore not convinced that the end result is the same spot. My suggestion is make the instruction again and mark the spot so you can be convinced!!!

    • @PeterFinnTheCarDoctor
      @PeterFinnTheCarDoctor  10 місяців тому

      Great to hear!

    • @TheJowes
      @TheJowes 10 місяців тому +2

      You indicate; great to hear. But you don't understand what I mean and would like an answer. The place you show in the video and the final result are not the same place and I admit that. Now make a video on the same subject where you mark the spot so that we can see from the beginning to the end whether the result is really as in the first video, which I very much doubt. And please no answer now, great to hear. good luck

    • @TheJowes
      @TheJowes 10 місяців тому

      I tested it the same wa
      y ThecarDokter Tell. Don't believe him. It doesnt work.

  • @hevinemi
    @hevinemi 2 роки тому

    Ristus notta. Justihi ihmettelin käyttöautolta volvoon ostamaani juurikin samanlaista settiä, ihmetytti nuo kuvaohjeet. Tämä video vastasi kyllä muutamaan kysymykseeni, mutta vielä hiemompaa että nuota saa Toyotaanki ku sellaistakin pitäisi vähä paikkamaalailla. Nuota ilmeisesti saa merkkiliikkeistä?

  • @djkipping
    @djkipping 10 місяців тому +3

    Slow but clear video... until the result which you hardly show at all! Disappointing in the end.

  • @ianandmaureen9518
    @ianandmaureen9518 Рік тому +8

    The end result looked like it was on a different area, the surrounding scratches etc. didn't look the same. I can't believe that the result at the end was the same gouged out scratch, it didn't look too good when you put on the clear varnish so how did the finished result look so perfect? Not convinced you have been entirely honest.

    • @PeterFinnTheCarDoctor
      @PeterFinnTheCarDoctor  Рік тому

      Same car. There were many scratches

    • @skydronewanderer2052
      @skydronewanderer2052 Рік тому

      I’m inclined to agree with you

    • @pietrinico
      @pietrinico 3 місяці тому +1

      @@skydronewanderer2052 It's a super fake video, I don't understand the need to not show the true final result. because the area where you apply the final resin is not the same area where you work with the initial scratch.

  • @blowmeaway1735
    @blowmeaway1735 Рік тому +3

    😂 I'm not hater but bro... rust on spot before paint this "Have to be fixed" now this rust gonna grow under paint and btw this paint should be used on scratch not on damaged point. But you showed something I'm sure someone gonna find usefull but you chosed wrong spot

  • @orur2286
    @orur2286 2 роки тому

    Nice video, But it seems to me that your clear coat expired two years ago..

  • @kwstashlr6362
    @kwstashlr6362 Рік тому

    Μπορείς να το κάνεις ποιο αναλυτικά Κατι δεν μας λες καλα!!!!

  • @akasperowicz
    @akasperowicz 5 місяців тому

    You polished other place then you repaired. The hole you tried to cover can be still visible in 17:15 on right-bottom corner. What a scam.

  • @peterbody4187
    @peterbody4187 Рік тому +1

    Great job. You've made a pretty meaningless instruction leaflet understandable. You should be working for Toyota!

  • @dorindorin4812
    @dorindorin4812 21 день тому

    People keep on pointing out in the comments that you didnt clearly show the results of the work in the video and there are clear doubts about the autheticity of the video and you are just replying with just some one word non sense.
    Besides that your video is kind of deceitfull and your accent is so unpleasant, your replies complete the picture. 👎

  • @PedjoGT
    @PedjoGT Рік тому +1

    Omg

  • @PedjoGT
    @PedjoGT Рік тому

    It is faster to show only pictures

  • @PedjoGT
    @PedjoGT Рік тому +1

    You doit it wrong