Honda Speedometer Drive Delete Overview and Install
Вставка
- Опубліковано 14 жов 2024
- Honda Speedometer Drive delete overview and install.
brickhousebuil...
This is a trick little piece designed to clean up the front wheel and fork on your custom build. The stock speedometer drives are no longer needed when going to a digital modern gauge while still using your stock forks and wheel.
These drive deletes are made from 6061 aluminum and sold in natural finish. They are a direct fit item for a wide range of Honda models that use Comstar wheels and various cast mags with the 15mm axle. The units include a spacer to cover a wider range of bikes. Simply remove your old drive unit, compare the total height to determine if you need the spacer or not, and reinstall! Note you MAY have to remove the metal ring used to spin the old drive but not always the case. Be sure to fit by hand first.
If you are unsure if this fits and are able to send me measurements of your existing drive unit I am more than happy to confirm.
Fits models:
CX500
CX500/650 Turbo
Rebel 250
GL650
GL500
CM400T
CB400T
CX650
FT500 Ascot
82/83 CB750SC Nighthawk
83 CB550SC Nighthawk
CB900C
CB650
CBX1000
77 CB750 F
77 CB750 A Hondamatic
79-82 CB750/900F/K/C
78-82 GL1000 Goldwing
83 GL1100 Goldwing
Various Shadow/Magna/Sabre models
brickhousebuil...
For those in the UK or Europe you can purchase these through Al of Kilted Bushido Builds to whom I've sent a small batch to. His initial stock will be very minimal but once I can see what the demands are for this product I can have more made to then send his way. His website is www.kiltedbush...
If you found this video helpful or simply wish to support the channel further feel free to donate to the "Tip Jar" via the paypal link below! Anything is very much appreciated!
www.paypal.com...
Brick House Builds Amazon Storefront
www.amazon.com...
For updates on this project as well as others be sure to follow along on all the Brick House Builds social media platforms!
Instagram - / brickhousebuilds
Facebook - / brickhousebuilds
Website - www.brickhouse...
Tik Tok - / brickhousebuilds
#brickhousebuilds #speedometerdrivedelete #caferacer
I am viewing every video that comes up on the screen from Brick House Builds. A Master Class !!! The very best here. Yep. I am all in! Wow!
Thanks Steve
Dang, sold out already! Will keep eyes peeled for when you re-stock. Great product
They shouldn't be sold out
@@BrickHouseBuilds when I go to them on your website, it says they are sold out, can’t add to cart. I’ll keep checking. Definitely a part I’d like to get.
@@skyjac92 Just updated. Not sure why the inventory was off. Thanks for letting me know
@@BrickHouseBuilds absolutely! Thanks for all the work you put into these videos
@@BrickHouseBuilds got one ordered! Thanks for your help.
Looks awesome and great solution to remove a part you won't need
Thank ya. Definitely not a must have item but its a nice piece to have available
It’s a subtle mod, looks really good and clean👍
Looks even better on some clean forks
@@BrickHouseBuilds 😂 I know you’ll get there!
Need one of these for a '78 Honda CB550. Hope you make some. Great I idea.
Great little bit of kit - looks very tidy! 👍
Thanks Mike
Very nice good quality piece and I noticed that would otherwise have an outer spacer it’s also part of the unit, those will be flying off your shelves.
Thank ya Miguel
Cool part! My CBX turbo bike could likely use one of those, as I still use the stock front Comstar on it. I use an electronic speedo & tach, so no sense to use the stock issue.
Thanks for a great video and the links!
Id be honored to have my part on such a rig!
Is there going to be a follow-up tachometer delete or conversion to digital video?
No I don't have a product like that but I believe one exists already for cb750s
❤️... Unrelated question... What version of boom boom boom is that at the end?
Im not sure what the song is but its available on Epidemic Sound
Hello. I am working on a CX 500 and have bought one of your Honda Speedometer Drive Deletes. What grease did you use?
Thanks for great videos and a great part.
Well thank you for picking one of those up! For grease just use some wheel bearing grease that you would use for axles and other things.
brother ! are you still selling this parts? just wanting to make sure before paying!
Yes of course. Website is always accurate
thanks!@@BrickHouseBuilds
Yep, like others have said - it certainly tidies up the front end! Nicely designed, man! 🍻🤘💜
Thank ya sir!
Cool idea, looks great
Thanks Jim!
You need a show on Motor trend
🤘🤘
This may be a dumb question but will you have another way to measure speed or is this bike strictly off-road? Love your videos BTW!
Hey Brian as explained when you go to a digital speedometer you have no need for the cable drive
Thank you, sorry I missed that, out of curiosity where does a digital speedo pickup the speed info?
@@brianh4104 no worries. They use a small magnet mounted on the wheel with a pickup that mounts to the fork leg.
@@BrickHouseBuilds thank you! Really appreciate it, Looking forward to future videos!
Perfecto
🙏🙏
Seems like it would be a good time to replace the wheel bearings while its open.
Definitely
@@BrickHouseBuilds take your wireless caliper off and just, set it down… anywhere, because it’s not attached.. lol gave me a chuckle.
any chance you have a drive gear retainer laying around for sale?
No sorry
You need to make these spacer for cb750k !
Planning to extend the line!
Do you think this would be compatible on a 93 Nighthawk750?
I believe that model has the 17mm axle or larger so no it wouldn't fit
Honda Speedometer Drive Delete for Comstar Wheels SOLD OUT!
Correct
@@BrickHouseBuilds How can I pursue it?
How can I buy this stuff?
It's on my website. Link in description
@@BrickHouseBuilds it's not working. I just click.
@@jennylopez9649 www.brickhousebuilds.com and then products.
just make a spacer that fit the front wheel left dust seal
This is a product for those who can't make one
Looks like they're already sold out.
No they shouldn't ne
Not sure why my inventory was off but fixed now
2006 Honda shadow vt600 deluxe???
No. These are for older comstar wheels and some bikes in the late 80s
@@BrickHouseBuilds will there be a possible creation of these for the vt600’s in the future?
I don't think I'm going to pursue them