I always fillet bream. If not big enough to fillet I let them go. I don't scrape though but fillet the skin off. Been doing thar for over 50 years as I am 64 now. Enjoy the videos ❤
Undoubtedly the best eating fish in the world. Nothing better than filet of Bluegill. Yes, I have fileted and enjoyed many bream. Corn meal has always been my favorite.😊
Sounds like many a trip in my experience and we just kept it going on an on, successful to me, sometimes you need to flush under load to get all the debris out, made the trip, fixed the boat, caught fish, ate fish, good times! And you could all do it together
Tyler, a couple troubleshooting things to try next time. Place the T-stat in a pot of water to test. Another, leave the stat out for a test run. Good luck.
Any fishing trip you don't have to a) swim home from, b) recover a sunk truck out of the water, c) no motors got blown up - is a good one in my book! Great video and looked like you all had fun (and some tasty fish.) Cheers!
PRO-TIP.... Put the old thermostat in a pan of cold water & heat it up to see if it opens. Do this before you install a new thermostat also to make sure it works. Enjoyed the video, the fillets look great!!! 👍🏼😎
Check your pickups/screens down in the foot. There should be one right behind the prop. The prop should be pushing water in it while running it. Make sure nothing has them clogged
I'm 74 and as you said we use to catch nice bream and I actually use to falay them also. If you like bream this is the way. Thanks for the awesome video's, look forward to seeing them.
Good morning from Kodiak Island Alaska I love how you do your mixture between fishing and being a Sawyer we fish up here doing a lot of trolling are premium fish is a white king salmon to you people out there that don't know what that is that is the Kobe beef wagyu of salmon the guys come in and go I got three and one of them was a white you can't tell by just looking at them you actually don't know until you cut into it in an air fryer for 8 minutes and it melts in your mouth omega-3 fatty acids Supra abundant in it
2 things... You can test a thermostat by heating it to it's set temp. If it opens, install it. If not, replace it. And, you live in MS, some of the best crappie fishing anywhere. Looking at your water, drop a minnow in and I bet you get bit. Really enjoy your vids kids.
Tyler enjoy the vids , we call them bluegills in Wisconsin I bought a fry daddy at wal mart not expensive uses very little oil . We like to plug it in outside works great and eliminates any deep fryer smell in the kitchen once it cools put the cover on stick it in the fridge can use the same oil a couple times .
Oh, those rocks / sand were in the lower unit settling on the water pump. Probably a few scratches in the pump housing, I doubt anything serious. That typed WHEN you change the impeller also change the housing. They have a kit.
Guys. The Beetle Spin, 1/16th oz. Black body w/yellow stripes, Chartreuse w/black stripes, and white. Use 4lb. test line. Come off the bank 20 feet. Toss and reel slow to medium speed. Hold on. Yer welcome.
I personally have never filleted anything like that. That would be just enough fish for me, but I can eat my weight in fish. I will definitely have to try that the next time I catch some good pan size brim
I do all the fish I catch that way don't like messing with the bones. If you can find Andy's fish fry mix give it a try. I use Andy's red and Andy's Cajun mixed together also put the mix in a zip lock bag put the fish in close and shake it works great. Keep up the good video's
Nice video . Sorry about the boat problems . I know nothing about fixing boat motors . Too bad about getting rained on , you were doing good . I do like to eat fish . Never ate brim .your son is very happy . Brit too ! God bless ….ed
If I can state the obvious, keep your motor out of shallow water. You probably had sand, pebbles, etc in the impeller area that you didn't flush out when you tried it at idle speed. You can speed up your engine in neutral by pushing in on a button on your throttle control. As long as the water is coming from your hose, it's just like being in the water (almost). As long as you are getting a good stream from the back of the motor, your impeller should be ok, but if you need to replace it, it's not very difficult. Thanks for the videos - I enjoy all aspects of the Wallace farm and sawmill life.
Heck yeah we filet brim! Except we call em bluegills here in the Hoosier state. Actually, we grow trophy bluegills here at B&B Farms, with one of those B's standing for bluegills. You make it to Indiana, I'll take you guys fishing. Got some 1.5 pounders in our ponds! Great vid, and good job on the engine repair!
Hey guys ! I’ll take you bream fishing but I’m sure you don’t want to come to Australia? The bream we catch here can get to 4/5 lb I live right on the ocean side in gods country for fishing! Love you show guys never miss on ! By the way how is the bus going? Cheers 🍻stay well keep your saw sharp and your lines tight 👍🇦🇺🍻🫶
sprinkle a little Louisiana hot sauce on those filets and let them soak a few minutes before you bread them, it doesn't really add any heat but does bump up the flavor
When thermostat is closed water recycles through the engine. Removed, you don’t get water through those passages? So that is where the crud was hiding?
You can test a thermostat in a pot on the stove, and if you do that at least you will know if the thermostat is actually working or, if it your problem is that or somethng else
Great video guys and gals ,gals is including that little girl dog ! I would be concerned about your impeller on the water pump with that much abrasive material that has pass through your cooling system !
I will NOT say anything about wimminfolk backing up trailers ... 😁 Unfair to Brit, as she could not see the edge of the trailer because of the rear fenders of the pickup ....
I fillet and skin all the fish I catch. If they aren't big enough to fillet they go back in the water. I have not eaten fish with the bones in since I was about 10 years old and they were so small we should not have brought them home. Just so you know I'm 68 y.o. now. Sunfish and crappies in all the lakes in east central Minnesota.
Hope you cooked the Brim in Olive Oil.Coconut Oil or Avacado Oil and not in the Heart Destroying Canola Oil, Crisco or the other Vegetable Oils. Do research on the devastating effects of these 'Vegetable' Oils.
Hi there guys,now that was so funny to see you guys get soaked, I love it cheers guys xxxxx
I’ve fished for every thing that swims in my 57 years but I’d have to say bream fishing is my favorite.
Never fileted a bream, and my parent's freezer used to stay full of them. But I'll try it now, years after I bream fished.
I always fillet bream. If not big enough to fillet I let them go. I don't scrape though but fillet the skin off. Been doing thar for over 50 years as I am 64 now. Enjoy the videos ❤
Enjoy everything y’all do!!!! Livin the dream!!!!!
Undoubtedly the best eating fish in the world. Nothing better than filet of Bluegill. Yes, I have fileted and enjoyed many bream. Corn meal has always been my favorite.😊
Fillet Bream Are A Way Of Life Here! Fish Fry Products Are Great! I’m In North Central Louisiana✝️✝️✝️
Nice little panfish fillets are second to none when it comes to flavor!!!
Agreed!
Sounds like many a trip in my experience and we just kept it going on an on, successful to me, sometimes you need to flush under load to get all the debris out, made the trip, fixed the boat, caught fish, ate fish, good times! And you could all do it together
perch fishing and cooking perch fillets (in egg wash then flour) with corn bread, coleslaw and beer.....then peach cobbler
Tyler, a couple troubleshooting things to try next time. Place the T-stat in a pot of water to test. Another, leave the stat out for a test run. Good luck.
If it’s a 4 stoke you can’t run without a temp stat
My son and got on some big brim 1day we kept like 40 fish in 30 min in stock pond. We fed about six people awesome. From Arkansas
All of us southerners have filleted brim. Just bigger ones is all. Delicious.
The fish was definitely looking good on camera. Looks like you would need a few more fish and a couple of sides to feed all of you good.
Never eat fillers but yum yum!😊
Found that breading. It’s great on walleye
Great video guys,👍we love watching from the jersey shore... thank you from big mike...
Love it all, thanks guys 👍
God bless, ttyl
I filay every thing in the fish family and it's great
My dad used to fillet all his fish.
Any fishing trip you don't have to a) swim home from, b) recover a sunk truck out of the water, c) no motors got blown up - is a good one in my book! Great video and looked like you all had fun (and some tasty fish.) Cheers!
Very true!
Oh my , yeah I have filleted bream and it is amazing !!
PRO-TIP....
Put the old thermostat in a pan of cold water & heat it up to see if it opens.
Do this before you install a new thermostat also to make sure it works.
Enjoyed the video, the fillets look great!!! 👍🏼😎
Good stuff guys!! Check your water pump intake screen for holes.
Check your pickups/screens down in the foot. There should be one right behind the prop. The prop should be pushing water in it while running it. Make sure nothing has them clogged
I'm 74 and as you said we use to catch nice bream and I actually use to falay them also. If you like bream this is the way. Thanks for the awesome video's, look forward to seeing them.
Glad you enjoy them!
Being from Louisiana we season our fish heavy before battering. Gotta have that seasoning dude. Love filet bream as well
Awesome video guys absolutely perfect job well done loved it thank you for sharing love you y’all god bless ❤❤❤
I enjoy your videos. I believe we call those Blu gill here in Kansas. Looks like fun fishing.
Good morning from Kodiak Island Alaska I love how you do your mixture between fishing and being a Sawyer we fish up here doing a lot of trolling are premium fish is a white king salmon to you people out there that don't know what that is that is the Kobe beef wagyu of salmon the guys come in and go I got three and one of them was a white you can't tell by just looking at them you actually don't know until you cut into it in an air fryer for 8 minutes and it melts in your mouth omega-3 fatty acids Supra abundant in it
2 things... You can test a thermostat by heating it to it's set temp. If it opens, install it. If not, replace it.
And, you live in MS, some of the best crappie fishing anywhere. Looking at your water, drop a minnow in and I bet you get bit. Really enjoy your vids kids.
Tyler enjoy the vids , we call them bluegills in Wisconsin I bought a fry daddy at wal mart not expensive uses very little oil . We like to plug it in outside works great and eliminates any deep fryer smell in the kitchen once it cools put the cover on stick it in the fridge can use the same oil a couple times .
Hey Guys that is the only way that I do brim & crappies Good eating 10 / 10 Love them done that way......😊😊😊😊😊 btim cecil pa
Love brim, shellcracker, bluegill
Great fishing and great legs.
using the fiberglass flag Poles port and star side backing into Pear
Oh, those rocks / sand were in the lower unit settling on the water pump. Probably a few scratches in the pump housing, I doubt anything serious. That typed WHEN you change the impeller also change the housing. They have a kit.
Good video. I like how you hung in there fixing your motor. Hopefully it is fixed. Stay out of the SAND! Time to go JUGGING!
Hi, down on the bayou I don't keep baby fish.
Look forward to trying this.
Great video, I fried 16 filets of flounder with the same Louisiana seasoned mix over the weekend, good eatin'.
Sounds great!
Glad third time was the charm, It's tough seeing you suffer fishing just for us But you had some good eating, so it all worked out.
We really did enjoy eating those fish!
Guys. The Beetle Spin, 1/16th oz. Black body w/yellow stripes, Chartreuse w/black stripes, and white. Use 4lb. test line.
Come off the bank 20 feet. Toss and reel slow to medium speed. Hold on. Yer welcome.
I personally have never filleted anything like that. That would be just enough fish for me, but I can eat my weight in fish. I will definitely have to try that the next time I catch some good pan size brim
You will love them!
Great video love them fish❤
Another great video guys!👍🏻
I do all the fish I catch that way don't like messing with the bones. If you can find Andy's fish fry mix give it a try. I use Andy's red and Andy's Cajun mixed together also put the mix in a zip lock bag put the fish in close and shake it works great. Keep up the good video's
Looked like great fun.
Nice video . Sorry about the boat problems . I know nothing about fixing boat motors . Too bad about getting rained on , you were doing good . I do like to eat fish . Never ate brim .your son is very happy . Brit too ! God bless ….ed
All good we enjoy it!
Can you take the water pump off and check to see if there’s debris in the water pump housing?
Great 🩳🩳👍👀👀🍑🍑
When i try my fish i fry them skin side down. Helps with curling ,good video.
Good tip! Thanks for watching!
If I can state the obvious, keep your motor out of shallow water. You probably had sand, pebbles, etc in the impeller area that you didn't flush out when you tried it at idle speed. You can speed up your engine in neutral by pushing in on a button on your throttle control. As long as the water is coming from your hose, it's just like being in the water (almost).
As long as you are getting a good stream from the back of the motor, your impeller should be ok, but if you need to replace it, it's not very difficult.
Thanks for the videos - I enjoy all aspects of the Wallace farm and sawmill life.
Love y’all’s fishing videos
More to come!
Sheila ten too
I drain my fish on a wire rack over a cookie sheet lined with paper towels to absorb the oil that drips off.
That's a fun video. Thanks for sharing
Thanks for watching
Heck yeah we filet brim! Except we call em bluegills here in the Hoosier state. Actually, we grow trophy bluegills here at B&B Farms, with one of those B's standing for bluegills.
You make it to Indiana, I'll take you guys fishing. Got some 1.5 pounders in our ponds!
Great vid, and good job on the engine repair!
Sounds like you have the honey hole for blue gill. Thanks so much for watching!
A thumps up and a like for all the effort 👍
Thanks for watching!
THANKS!
Hey guys ! I’ll take you bream fishing but I’m sure you don’t want to come to Australia? The bream we catch here can get to 4/5 lb I live right on the ocean side in gods country for fishing! Love you show guys never miss on ! By the way how is the bus going? Cheers 🍻stay well keep your saw sharp and your lines tight 👍🇦🇺🍻🫶
Great video! Maybe next time you can demonstrate how to filet them.
Thank you, I needed that!
sprinkle a little Louisiana hot sauce on those filets and let them soak a few minutes before you bread them, it doesn't really add any heat but does bump up the flavor
Thanks for the tip!
Install an after market back up camera if you don't have a factory installed one. You can get a good one for well under $99.00
Just curious if you checked the water intake area for screen clog or damage?
When thermostat is closed water recycles through the engine. Removed, you don’t get water through those passages? So that is where the crud was hiding?
Put the thermostat in a pan of water on the stove with a thermometer and see when it opens.
there might be more than one direction to run water
You can test a thermostat in a pot on the stove, and if you do that at least you will know if the thermostat is actually working or, if it your problem is that or somethng else
Brittney is a 10! not sure about the fish 🙂
Many times
Always ate them whole including tails
How many 1,000 ,s did I fillets I lost count . Best way to eat them . ( BA in WI. )
I tried to fillet bream once, but wasn't that successful. I need practice. They are good though!
👍
We have eat brim every way on earth ,,they ain’t no bad way ,,it’s all good
We agree!
Great video guys and gals ,gals is including that little girl dog ! I would be concerned about your impeller on the water pump with that much abrasive material that has pass through your cooling system !
Bluegill is awesome.
Glad you have your boat problem fixed! Great video and it warms the heart to see y'all's dedication to your great family.
Fillet is the only way I have had them. Rivals Crappie.
we called them bluegill in mo/ind what river is that you fish at
I will NOT say anything about wimminfolk backing up trailers ... 😁 Unfair to Brit, as she could not see the edge of the trailer because of the rear fenders of the pickup ....
What river are you boating on?
I fillet and skin all the fish I catch. If they aren't big enough to fillet they go back in the water. I have not eaten fish with the bones in since I was about 10 years old and they were so small we should not have brought them home. Just so you know I'm 68 y.o. now. Sunfish and crappies in all the lakes in east central Minnesota.
Its probaly your water pump had one did same thing.
We filet bream. Call em bream nuggets.
I don’t run a thermostat need to replace the water pump Will and damage the water pump impeller the black did all Stan need the back flush
How do I get to your other site, thanks really enjoyed all your videos
www.patreon.com/WallaceFarmandSawmill
Thanks for watching!
Only way to cook bream. What part of Mississippi do you live in?
I don't know why you need a thermostat on an outboard motor in Mississippi. Leave it out.
Those are bluegill
Hmm. I'd say this is one fishy video.😃
Tyler pumpkin seeds have a stub face
Change your impeller
Those are bait fish, aren't they?
Impeller
Poor guy burned his forearm to a crisp!
Those are bluegill. Taste better cooked whole.
Did you say fishing or wishing?
Hope you cooked the Brim in Olive Oil.Coconut Oil or Avacado Oil and not in the Heart Destroying Canola Oil, Crisco or the other Vegetable Oils. Do research on the devastating effects of these 'Vegetable' Oils.