Sounds like a Beast my boi, keep up the good work iv been watching your vids for a few years now I’m in Shafter ,CA you inspired me to get a man van too Lol. it’s a 08 Escalade awd. I just tuned it and put long tubes with catlles y pipe and a drop in k&n filter she pulls pretty good for a tank .
Preciate ya boss man. I love man vans. My first ride was an 85 Dodge Ram charged. With a drop and 15x10s haha. I thought I was Koo. And hell yea. Bet it sounds good. Keep it up. And much love from Texas boss 🙏🙏
@@hugodiniro Thank you bro I appreciate it you have a lot of good content on your vlogs . I want to do a cam and maybe e85 I’m trying to see if I can hit a high 13 I would be very happy if I do lol . I fell in love when I herd your cam for the first time I was hooked lol .
Hell yea. I love thought bout e85 but I heard I’d have to run new fuel line. And new fuel pump. Not sure. Hopefully this summer I’ll kno what I run in the 1/4. Last set up when I was cam and stall only I ran a 10.0 in the 8th. Now I’m full bolt on. Upgraded stall. And built trans. So hopefully I’ll be able to run the 1/4. My first build was better for 1/8. Hope this one a bit for both
@@hugodiniro I’m sure it will run a really good time for sure. it was good chopping it up with you I’m a big fan and much love all the way from from cali keep up the good work God bless to you and your family 🙏🏽
Preciate ya boss. Need to get my performance tune done. Running out of fuel pump. Idk if it’s old and weak or I created a monster. Haha. But going to take advantage and replace with higher pressure fuel pump
I did a stage 2 cam on mine, the other day I did a pull and 3rd wouldn’t kick in at 85 I let off because I freaked out, turns out it doesn’t till 100+😮😅
I have the same exact truck 2004 model n all blacked out on 22s I watched a lot of your vids because we have the same truck I wanna know where I should start to put more power down I put a Corvette servo in so she shifts a little better and a intake for more airflow now I'm gonna do an exhaust do you have any upgrade advice??
Thank you for the views and comments. The servo makes it shift quicker and firmer. I would get Long tube headers with no cats. And get a tune to upgrade it all and while you’re tuning it. Let the tuner kno to delete the down stream o2 sensors so it won’t throw a code and your ride won’t run funny. Feel free to ask more questions. I do not mind helping or giving advice
These are the stocks 3:73 gears. Not really wanting to change gearing. Gots good low end and decent mid range. And I have the 36lb injectors right now boss.
@@savagemode8623 yea we can do it. Yes mine is heavier with that awd bs. And I ain’t skinny so hahah. You got a snap? Add me. I’d love to see yours @ hugodiniro on snap or Instagram
@@genenew2467 yea. Everyone usually “builds” single cabs or cars. There is anothe denali like mine but it’s procharged. That thing is awesome!!! Just look up procharged Denali. It’s a black one. Think it’s justinGN OR something like that
On line it says 8 seconds for this big tank. But for stock. If we count on the video. It’s like around 5 seconds. So i would guess a bit quicker than the tbss. And a bit slower than the srt8 jeeps
Man I love this. I have an 04 Yukon that I’ve been fixing up little by little. Love the vids man!
Thank you sir. 🙏🙏. I do it for y’all. And to have fun along the way lol
About time I found a awd video, everyone I see with a cam either is rwd or never does pulls
Sounds like a Beast my boi, keep up the good work iv been watching your vids for a few years now I’m in Shafter ,CA you inspired me to get a man van too
Lol. it’s a 08 Escalade awd. I just tuned it and put long tubes with catlles y pipe and a drop in k&n filter she pulls pretty good for a tank .
Preciate ya boss man. I love man vans. My first ride was an 85 Dodge Ram charged. With a drop and 15x10s haha. I thought I was Koo. And hell yea. Bet it sounds good. Keep it up. And much love from Texas boss 🙏🙏
@@hugodiniro
Thank you bro I appreciate it you have a lot of good content on your vlogs . I want to do a cam and maybe e85 I’m trying to see if I can hit a high 13 I would be very happy if I do lol .
I fell in love when I herd your cam for the first time I was hooked lol .
Hell yea. I love thought bout e85 but I heard I’d have to run new fuel line. And new fuel pump. Not sure. Hopefully this summer I’ll kno what I run in the 1/4. Last set up when I was cam and stall only I ran a 10.0 in the 8th. Now I’m full bolt on. Upgraded stall. And built trans. So hopefully I’ll be able to run the 1/4. My first build was better for 1/8. Hope this one a bit for both
@@hugodiniro
I’m sure it will run a really good time for sure. it was good chopping it up with you I’m a big fan and
much love all the way from from cali keep up the good work God bless to you and your family 🙏🏽
Truck running strong bro 🔥🔥🔥🔥
Preciate ya boss. Need to get my performance tune done. Running out of fuel pump. Idk if it’s old and weak or I created a monster. Haha. But going to take advantage and replace with higher pressure fuel pump
You still have this beast BRO
Yes sir. Still active
@hugodiniro cool man I just put some 862 heads on my old girl
I’m your 960 subscriber
Thank you
We need som races now 💪🏾
I now right
I did a stage 2 cam on mine, the other day I did a pull and 3rd wouldn’t kick in at 85 I let off because I freaked out, turns out it doesn’t till 100+😮😅
@@IgnacioTalavera-vz8dn dang. Prolly got highway gears. I got 456s now. So goes thru the gears faster
@@hugodiniro I also upgraded the transmission after blowing up 2 I got it beefed up with shifters as well.
@@IgnacioTalavera-vz8dn can’t go wrong with that. My old trans was built. This one I got now is a stock 4l80e with a shift kit
4l60 or 65? do you have a corvette servo or stall ? those shifts are crispy
Built 4l65e. I have both. Servo and 3000-3500 tci stall.
I have the same exact truck 2004 model n all blacked out on 22s I watched a lot of your vids because we have the same truck I wanna know where I should start to put more power down I put a Corvette servo in so she shifts a little better and a intake for more airflow now I'm gonna do an exhaust do you have any upgrade advice??
Thank you for the views and comments. The servo makes it shift quicker and firmer. I would get Long tube headers with no cats. And get a tune to upgrade it all and while you’re tuning it. Let the tuner kno to delete the down stream o2 sensors so it won’t throw a code and your ride won’t run funny. Feel free to ask more questions. I do not mind helping or giving advice
Yo if your still responding did you swap in a new cluster cause that sure dont look like the factory one
You’re correct. It is my cluster. Just swapped out the layout and bezel. It’s a Escalade platinum layout with blue LED lights
What gears you running bro
You should add 50lb injectors push more hp
These are the stocks 3:73 gears. Not really wanting to change gearing. Gots good low end and decent mid range. And I have the 36lb injectors right now boss.
@@hugodiniro seen your videos right now in order you got the same set up as me but add them 50lb you feel the difference
Only difference is I got 4.10
@@omarsanchez4131 which ones you got ? You got a part number ?
Still got the same cam?
Yes same cam. Plus diffrent top end
@@hugodiniro what did you do differently? 🤟 yours one my fav builds bro 😎
Preciate ya boss. And I got ported 243 heads. Ported tbss intake. 36lbs injectors. Ported ls3 throttle body
Where u located bro I want to race you in my Yukon slt
I live in plainview boss. It’s between Lubbock and Amarillo. I’d love to run another Yukon.
@@hugodiniro that’s sick I stay in Lubbock we should meetup sometime!
Nice!!! Is it that procharged one ? Or super charged one ? I seen one at idalou a while back and it was moving !!!
@@hugodiniro no I wish! Mines just fbo no cam but it’ll still be fun I think I’m a bit lighter than you
@@savagemode8623 yea we can do it. Yes mine is heavier with that awd bs. And I ain’t skinny so hahah. You got a snap? Add me. I’d love to see yours @ hugodiniro on snap or Instagram
What gear ratio u running in the diffs
It’s the factory ones. These come with 3:73 awd
I have a 2005 denali, trying to find some results on the awd yukons but there's not many with much work done
@@genenew2467 yea. Everyone usually “builds” single cabs or cars. There is anothe denali like mine but it’s procharged. That thing is awesome!!! Just look up procharged Denali. It’s a black one. Think it’s justinGN OR something like that
@@genenew2467 @justin87gn is the tag on that denali
Needs some 456's
@@haydenhale2646 check the recent videos boss. It has them now
What’s your 0-60 bro?
I’m not sure boss man. I’ve never timed it. Or wouldn’t kno what to use to time it.
On line it says 8 seconds for this big tank. But for stock. If we count on the video. It’s like around 5 seconds. So i would guess a bit quicker than the tbss. And a bit slower than the srt8 jeeps
How much power she putting down
I haven’t found an awd dyno. If I would have to guess. It should be around 370-390 awhp.
@@hugodiniro oh I see I have an lq9 with a chop monster cam and a tbss intake coming
Nice. I got the Lq4. Only difference is yours has the flat top piston. I got the tbss intake ported. 243heads ported. And ls3 throttle body ported
GMC yukon hub