Here’s an improved version of your instructions: 1. Power the Nebula Screen separately: Ensure that the Nebula Screen is connected to a separate power source. 2. Copy the firmware file: Directly transfer the firmware file to the SD card. 3. Nebula Screen setup: Follow the on-screen instructions on the Nebula Screen. 4. Insert SD card into the printer: Once the steps on the Nebula Screen are complete, insert the SD card into the printer. 5. Select the correct model: On the Nebula Screen, choose the appropriate model for your printer. 6. Power on the printer: Finally, turn on the printer to begin the update process.
You need to take the file out of the folder. Every time you flash the printer with the same firmware, you need to rename it. For example you can rename it firmware1.bin, then firmware2.bin, etc.
Pull out just theEnder3V3SE_firmware.bin file from the directory. Place it in the root directoryof the SD card. rename it firmware.bin. Make sure you have View-->Show-->Filename extensions turned on first so you don't make it firmware.bin.bin :) Then insert it and turn on the printer and wait, the UI does suck, but it will finish after some time, I think it wsa 15 minutes or so.
@@danbrown5644 Here’s an improved version of your instructions: 1. Power the Nebula Screen separately: Ensure that the Nebula Screen is connected to a separate power source. 2. Copy the firmware file: Directly transfer the firmware file to the SD card. 3. Nebula Screen setup: Follow the on-screen instructions on the Nebula Screen. 4. Insert SD card into the printer: Once the steps on the Nebula Screen are complete, insert the SD card into the printer. 5. Select the correct model: On the Nebula Screen, choose the appropriate model for your printer. 6. Power on the printer: Finally, turn on the printer to begin the update process.
Format the SD card, Direct the extraction to the SD card and name it something different. you need to have it off when you insert the card, power it on , follow prompts.
Here’s an improved version of your instructions:
1. Power the Nebula Screen separately: Ensure that the Nebula Screen is connected to a separate power source.
2. Copy the firmware file: Directly transfer the firmware file to the SD card.
3. Nebula Screen setup: Follow the on-screen instructions on the Nebula Screen.
4. Insert SD card into the printer: Once the steps on the Nebula Screen are complete, insert the SD card into the printer.
5. Select the correct model: On the Nebula Screen, choose the appropriate model for your printer.
6. Power on the printer: Finally, turn on the printer to begin the update process.
You need to take the file out of the folder. Every time you flash the printer with the same firmware, you need to rename it. For example you can rename it firmware1.bin, then firmware2.bin, etc.
I'm having the exact same problem as you so have you been able to sort
I worked it out 😅
I just had to download the correct firmware for ender 3 v3 se, and format sd card and rename the firmware. it worked first try
What was the firmware name
@dillonnoates4623 Oh, and format the usb first, FAT32 and change the allocation unit size to 4096 bytes
вставьте флеш карту с файлом в сам экран а не в принтер
You have fix it? There is any solution?
Pull out just theEnder3V3SE_firmware.bin file from the directory. Place it in the root directoryof the SD card. rename it firmware.bin. Make sure you have View-->Show-->Filename extensions turned on first so you don't make it firmware.bin.bin :) Then insert it and turn on the printer and wait, the UI does suck, but it will finish after some time, I think it wsa 15 minutes or so.
I'm having the same issue.
I'll be honest, I don't understand your instructions. I'm not the greatest on the laptop
@@danbrown5644did you figure it out?
@Impuritan1 yes, when I get home I'll run through what I did for you
@danbrown5644 I'm so confused. Please help😅
@@danbrown5644 Here’s an improved version of your instructions:
1. Power the Nebula Screen separately: Ensure that the Nebula Screen is connected to a separate power source.
2. Copy the firmware file: Directly transfer the firmware file to the SD card.
3. Nebula Screen setup: Follow the on-screen instructions on the Nebula Screen.
4. Insert SD card into the printer: Once the steps on the Nebula Screen are complete, insert the SD card into the printer.
5. Select the correct model: On the Nebula Screen, choose the appropriate model for your printer.
6. Power on the printer: Finally, turn on the printer to begin the update process.
Format the SD card, Direct the extraction to the SD card and name it something different. you need to have it off when you insert the card, power it on , follow prompts.
You have to open the file folder. The machine cant read a closed file. The individual files need to be in the root directory.
How did you mount the gsensor bracket on 3 v3 se?
@@lars6664 I didn't use it and it works fine