LumiLor Starter Kit Training
Вставка
- Опубліковано 16 чер 2024
- This training is for the product known as LumiLor. There is a separate training video for LumiLor Pro.
Visit support.lumilor.com for additional training resources.
Chapter point times, module numbers and names.
00:00 M001 Introduction and LumiLor Theory.
00:55 M002 LumiLor Stack Diagram.
02:32 M003 Unboxing the LumiLor Starter Kit.
03:05 M004 Preparing the plexiglass panel and speed tank.
04:16 M005 BACKPLANE masking.
06:11 M006 BACKPLANE explanation. spray gun overview.
07:08 M007 BACKPLANE shake, strain, loading spray gun.
07:39 M008 Proper spray gun mounting between coats.
07:51 M009 BACKPLANE application on panel.
08:44 M010 BACKPLANE application on speed tank.
09:13 M011 Resistance check with multimeter.
09:37 M012 BACKPLANE unmasking and sanding tape edges.
10:14 M013 DIELECTRIC explanation.
10:49 M014 BACKPLANE masking the connection site.
11:23 M015 DIELECTRIC shake, strain, loading the spray gun.
11:59 M016 DIELECTRIC application on panel.
13:20 M017 DIELECTRIC application on speed tank.
13:47 M018 LUMICOLOR explanation.
14:12 M019 LUMICOLOR shake, strain, loading spray gun.
14:48 M020 LUMICOLOR application on panel and speed tank.
15:57 M021 BUSBAR explanation.
16:32 M022 BUSBAR masking the panel.
17:49 M023 BUSBAR masking the speed tank.
18:13 M024 BUSBAR application on panel and speed tank.
18:48 M025 Resistance check with multimeter.
19:51 M026 BUSBAR unmasking and wiring overview.
20:07 M027 BACKPLANE spade connectors preparation.
20:48 M028 Spade connectors and connection test.
22:00 M029 Spade connectors mounted with J-B KwikWeld.
22:40 M030 BACKPLANE application with panel connectors.
22:57 M031 Male connector application on speed tank.
23:32 M032 BACKPLANE application on speed tank connectors.
23:50 M033 Masking connection site and connect the inverter.
24:27 M034 CONDUCTIVE TOP COAT (CTC) explanation.
24:49 M035 CTC shake, strain, loading spray gun.
25:21 M036 CTC application to panel and speed tank.
26:18 M037 Encapsulating Clear Coat explanation.
26:43 M038 Encapsulating Clear Coat application.
27:23 M039 LumiLor encapsulation.
27:44 M040 Black out and Final Clear explanation.
27:57 M041 Black out preparation of panel and speed tank.
28:14 M042 J-B KwikWeld application.
28:56 M043 Masking of the illuminated area.
29:43 M044 BLACKOUT application and unmasking.
30:18 M045 Final Clear Coat application - Авто та транспорт
I just watched a whole video on something I'm never ever going to do.
It sure was interesting though.
I'm hoping I don't do this but damn...
Same
@@sfraise Just hand him your wallet, it will be less painful that way lol
Fascinating! One could become a master craftsman just for Lumilor. On the other hand, suddenly glow-in-the-dark paint is looking better and better!
Damn man that’s a so long and delicate process 😱 1 wrong move and your done for 🤯
Very nice and thanx for the easy training for beginners... Great...
this cool but over my skill grade. just started spray painting and this video popped up. awesome detailed video
Wow, loved watching the process.
Im watching this in preparation for trying this system out for a client. Im half regretting accepting to try it out. Lots of potential ways to trip you up....
!!!!!! WAO !!!! EXCELLENT VIDEO, I ALWAYS WANTED TO KNOW HOW THESE SCREENS ARE MADE
This is some pretty awesome stuff! Thanks for the video and how it's done!
Thank you to share the video, and you share your experience, is interesting. Excelent.
Great product, this would be a great product to demo in our 3D and Electronic clubs!
A thought I had was copper leaf could be used and engine turned leaving one or both busbars as its own detail. (one busbar could be wider if needed for this detail)
I don't know how well that would work as a continuous conductive strip. I'm sure the painted copper strip could be applied thick enough to engine turn.
Something worth investigating for me if I choose to add this to my car.
I love this concept bro....😚😘😍
Very interesting viene. Thank you.
Super! Thank you very much!
Thnx for explanation! It was very interesting, even i did Not have the test kit 👍
Excellent and Perfect
thank for training
Synchronicities are WILD!!!!!!!
this is amazing 😯
Sick dude. Will be adding to my car in a year or two when I can afford it lol
very impessive! i thought i would be the inventor of sprayable light technology. i work in my living room and garage... it means like i wasted years of my life just to find out about you guys. if you could see me now, my dream fell apart in just seconds
congrats to you guys
super cool effect! I am wondering if it's possible to apply to a surface where electrical wiring is not possible to use?
Hei Lumilor,
Love your work and stuff!!! best technology!
I have a question, for example, I own a camera is there a possibility to do lumination on the camera body?
Luv it.
Amazing training ;; thanks for sharing.. great technologie... Hugs... ;)
Thank you!
Couple quick questions....😁
I know the minimum space between the backplane and busbar is 1/8 inch... is there a maximum space recommend between them? Something that should not be exceeded...
Secondly, is there a maximum amount of surface area that can be lit up with LumiLor? Or is it all about the inverters and the load they can carry?
Thanks in advance!!
Cheers and Much Love from the BloodShot Studio!!🤘😎🍻
Genius!
Do you guys make lumilor for the clothing and shoe market? If not you should because people like my son who make custom shoes and clothing it would be next level and it's a huge market. Very cool product guys
What's great is I am watching office space and this backround track comes on hah
i have already started a autobody repair shop its not working yet .it lacks alittle more funding. really wanted to do this course and start my work shop soon
Well I know what my new career is, this is the shiznet!
Is the starter kit all good outa the bottles?. or do they need to be mixed with anything like a reducer or thinner?
I really enjoyed this video. Wish I could do this to my car someday. But the kit is too expansive right now.
Thank you so much, can i use those materials in panel cars?
best .!!!
Is this possibly useable for the dots in iron sights on a gun ?
I wonder how luminor paint would last here on Maui.
I would love to paint my entire corvette with it to match the competition yellow.
This is some high speed stuff but question. Can i paint a less Paul with this and wire it up to the pickups?
congratulations. I work with customizations in Brazil, I would love to bring this technique to my country. How do I get the products and training?
I’m assuming you have other color options for your dielectric layer other than white, right?
Thank you sooooooo much for this video, it was very helpful, 👏 big salute for you bro
Subscribe to your channel 🙋🏻♂️❤️
It’s so easy
Jeebus!...I am getting old because this is some ultra sci-fi off planet shit!....but I love it..
Will LumiLor work on leather and/or fabric?
True
Can you put color on top of everything to hide all of this, and will it shine thru it?
Can we use it on a T-shirt or Tattoos? Sorry for the questions, I'm a kind noob. Genius product.
Can you use a smaller airbrush to apply this?
donde puedo adquirir esos productos?
i feel like im learning soldering and shrinking EL wire again, oh vey
for busbar tape... 3/4 green tape + 1/4 blue tape... you finish with 1'' of tape on border?
cant you put conductive material inside of a tank to make it look better?
damn it feels good to be a gangsta
ha!
Como lo traigo a la Argentina?
Can u apply that over a clear wrap?
I want to buy this for my car and install this but I’ve never painted before! So gonna have to watch this a few times.
You can learn the basics of LumiLor and how it works here
support.lumilor.com/en/article/lumilor-basics-and-faq
May I use this in my hobby kits?
Do you know the legalities of the different colors. I know in some states people who put different cosmetic lighting to their car will get pulled over as the colors are not highway correct. IE red lights in the front of the car.
It seems some of the colors are safe anywhere but wonder about blue, red and orange (blue because of emergency vehicles.)
If the multimeter shows 0.00 it meant that the current is flowing freely
I get that this is an automotive paint, but I wish I could apply this to my models. I play Warhammer 40,000, and it would be amazing on sci fi models
Can I get that paint in a orange color????
You may want to correct @ 19:34 - a reading of 0.0 ohms on a multimeter signifies a direct short while OL indicates
open..... you are showing a correct reading in the meter - OL, but in the annotation you say "0.0 indicates no direct short...." Just saying.....LOL
thanks, going to have to edit that.
@@DarksideScientific Haven't fixed it yet?
Just thought same...
I would like to get locally hated on the side of my doors of my 2022 jeep gladiator. How can I get that done?
An important first step is to put on rubber gloves and wear them throughout the entire process... Both for your protection and to protect LumiLor from your succulently supple meaty appendages.
And maybe a respirator ??
@@davoupnya3202 Always, it's a must!
This is 4 years old . Has the prices go down. I’m moving to Ecuador in a major city. If it’s work it I would might open a shop that’s dedicated to paint and Lumilor as a special part of the shop .
LumiLor applicators are professional painters who use LumiLor in their business. You can find a LumiLor applicator to work on your project here.
www.lumilor.com/applicators
If you need more information contact us at info@lumilor.com
where i'm get this product in indonesia, please tell me
Does this work with cars?
How to radium sticker in my bike..????
So how is the gray car showing a grey automotive color but then stripes can lit up hiding the whole process below the paint?
I want some of this but... open the pod bay door HAL...
Bravo. From Croatia. ✌💪👏 Send in Croatia?
Contact Demon paint ... www.demon-paint.com/index.php/home/
@@DarksideScientific too bad I don't speak German. :(
alguna ayuda envio para peru gracias
OK but whatif i only want to do thin lines on my exsisting paint job?
You lost me at the :20 second mark. Who designed your light bulb animation? Is that really how you think it works? I know... I'm being too critical. My apologies. I simply could not resist. Can you offer some pricing for 48039 area code? I'd like to try this out and see where it leads. Thanks for sharing.
Kkkkkkkk so true. Btw, nice product this LumiLor!
Right? I laughed hard at that animation.
Let's be fair, though -- being accurate would have muddied the demonstration a little ("why are the wires 'disconnected'?"), and that's exactly how we represent lightbulbs in circuit diagrams.
Just trying to keep it simple so people get the basic concept
You're in Michigan, right? There are a couple of dealers in Ohio that can help you out. Contact info at lumilor.com/dealers
Donde puedo comprar esa pintura y cuanto bale
Who needs light bulb anymore😁
I want to learn to do this. I want to do it as a business! Can you help?
Would this work on complex geometries? A grille on a car for example?
maybe, because you need to have voltage around it to light up if im correct, so you need to have those two conductive layers around it to light up but im not sure if you have the skills to make those conductive layers on the other side i think it can be possible but you would need a really skilled painter with a lot of patience and skill with for example mini figures painting, it would cost a ton and a lot of time but its possible
I don't know what's more of a pain this system or a true old fashioned chameleon color. Its certainly more rewarding lol
You can learn the basics of LumiLor and how it works here
support.lumilor.com/en/article/lumilor-basics-and-faq
man i would love to have this for paintings if it wasn't such a pain in the ass
It's way simple to do when you consider what you can do with it ! Best of luck to you !
basically a painted LED circuit?
보통 이런 획기적인 아이템은 특허기간이 끝나야 전세계가 이용합니다.
How order materials
sir, I want to have this LUMILOR product, but I don't know how to get the product that you sell by buying it, please advise from sir, thank you sir
How long till this paint can become RGBW?? That would really BLOW peoples minds
we're not there.....yet :)
So this means you need to be an electrician too to do this
Waarom kan je dit niet in Nederland kopen
Also, when doing this with. Car? Can you do a tutorial on that or anything?
LumiLor applicators are professional painters who use LumiLor in their projects. You can find a LumiLor applicator to work on your project here.
www.lumilor.com/applicators
If you need more information contact us at info@lumilor.com
How come the unreduced backplane material is no longer used to paint the tabs?
We found that it was not required, BACKPLANE alone works just fine.
If you have some you can use it up.
Woow, HUGE mistake at 19:32.
The text says that "A multimeter reading of 0.0 indicates there is no direct short between the busbar and the backplane".
This is quite the opposite!
0.0 Ohm is definitely a short.
The meter shown has 'O.L' on the display. This stands for OverLoad. This is the value you want to see.
Wasn't the "OL" stands for Open Loop?
@@saisokuhashiriya8069 Nope, you also get this when you measure 50V at the 20V setting. (Fluke user here) But you could for the resistance measurement interpret it that way if it's easier to remember for you.
Want 🔥
goodness, that seems simple but fuck up on any step would cost ya, and apparently if youre doing a big job you cant just stop at any point and resume on the weekend.
I'd love to have this on my guitar or my car but I don't trust myself with this process at all & I don't have any idea where to go for this. Also considering the pain it is, I bet labor would cost way more than parts.
www.lumilor.com/get-something-lit
@@DarksideScientific thank you for this!
how to get kit
This would be perfect for me painter, Aerospace Luminescent systems, SMT ESD devices and PCB fabrication I had a shot working with it at a company I used to work for I would love to become an expert I also have my certification on subject J-STD-001 class 3 product excitability I am very interested in how I can get involved
Automan can be real now
How do you spray a car and hook up the current???
This video is about it xD you can apply it on different surfaces and shapes
I will make screen paint
Hello!
How can I buy it?
How much is it?
Google
Can this glow red?
You can learn the basics of LumiLor and how it works here
support.lumilor.com/en/article/lumilor-basics-and-faq