Thanks so much for posting this, I had the same issue ordered the part and it solved straight away saving me a lot of time and money in diagnostics and repairs.
Excellent, just a heads up, sometimes you will get the error message again, with some clicking from the passenger footwell, its the relay. Just be patient and remove the fob and re insert until the message says "key docked" and then she will start. It doesn't happen very often but be prepared so you don't get upset lol..
Hi I have this problem currently with my 2007 Landrover freelander2 , very much appreciate your video, Question I can not see where I can order this part from, Cheers Nigel
Hi my emulator stopped working after 3 weeks now car wont start again with steering colomn locked emulator is still plugged in? Took live off battery for a few mins put it back on put key swob back in but message still says steering column locked ? What next p.s i did just replace a backup key swob with a new one as the wife said 1 day before msg came back the key swob was playing up not unlocking the central locking etc so ordered new fob case and battery installed and soldered new battery pins onto key swob circuit board then thats when the message steering column locked came back
Hello Michael My vehicle is due it's Mot soon, and I have this emulator attached now. Do you know if it would pass it's Mot with it attached? Thanks Hilary
My freelander is currently disabled due to the locking issue, Covid-19 has closed my garage of choice. I've ordered this unit to see if I can get the car moving again!
@@RichardJohnson-gz8nj OK great , hopping it will solve my problem , i've just ordered it , there a special order to plug it in like batterie disconnect ? or leave the key in ignition when plug the device ? just asking . thanks for your respond @Richard Johnson
@@hamieuxcarl69 I just got access to the unit, with the battery connected and swapped the connect from the locking unit to the emulator. It was that simple.
Has anyone used this long term yet and had any issues. I read that with this fitted the steering lock could activate while you're driving ,causing a possible bad accident . Has this happened to anyone ?
No issue reported on here or anywhere yet. I've used this since the video while I have seen the message while stationary but no lock. Just re insert the key, never seen whist driving.
Hello Michael, i want to buy one of theese, because i am recieveing the same message on my car! Can you please better explain where exacly do i have to plug the module in , 3:11 in your video? Because i dont know how to find that exact wire. Thanks in advance!
The emulator I ordered is a bit loose once in the connection. Do you know if I can leave the black connector out of the blue connector or does it have to stay in? Thanks again
If it's the old evoke, then it's a freelancer with a different lid. You need to remove the lower steering column case and see if it's the same Volvo unit. I think you will find it is. Land Rover /Ford used so many of the same parts across the early models. Mike
@@michaelstanley3961 Sorry to inform, I was so excited I recived my order and plugged it in but it didn't started the car, I see the light coming on on the emulator but when I'm pressing the start button it's not starting, I tried various slots but no joy!!! Any thing you can recommend! I have 2008 freelander, Volvo steering lock P31202096 fitted with car, Any suggestions would be appreciated!!! Kind regards, Ravi.
Thanks for this information, I've just fitted mine and putting the key in made the car initialize normally (door open chimes, etc) but when I pressed start there was a click and everything went dead. Couldn't remove key, etc. After disconnecting the battery for a few minutes it actually started. Then I drove to the shop and it did it again, had to disconnect battery twice to get it running again.... any ideas please anyone?
I ordered this module I got the new version of it It starts the car correctly but does not unlock the steering wheel Also the sound which the module makes is very weak
Occasionally. Also if the battery is disconnected the fault returns on the screen. Just pop out the fob and the key docked message comes up and off you go. It seems the cpu reads the fault code and defaults to steering column locked when it clearly isn't. So don't panic if you see it. Enjoy
Hi my emulator stopped working after 3 weeks now car wont start again with steering colomn locked emulator is still plugged in? Took live off battery for a few mins put it back on put key swob back in but message still says steering column locked ? What next
Hi thank you. Pluged in emulator car started. But when trying to drive steering locked so had to unplug it, am I doing something wrong. 2009 Freelander 2. 2009. Thanks
Hi. Do you mean the steering actually locked or the message came up? Every now and again I get the same message, I remove the key and then re insert until the key docked message comes up. I have never had an actual physical steering lock issue only the message. Merry Christmas Mike
What do mean by they only last a few days.I assume you mean the message returns. But remove the key and give it a few seconds then refit until it says key docked the car then starts no issue. I get it once a month or so but no problem. Please clarify. Thanks Mike
Great video sir! , Is there 4 wire on original module? , Can i use this for jaguar s-type? Because my jaguar have same code and car won't start. Thx for your help. 🙏😀
Go on the modules makers website, it details what models are covered and they might have others. The S type was made under Fords reign over land rover jag and they shared many components and systems across the platform. Good luck Mike
Hi Tomasz, my emulator didn't work, I called the supplier and they are sending new one for me, Did you get second one yet? How did it go? Please inform as I'm looking for ideas!!! Model number on my Sterling lock is Volvo P31202096, Regards, Ravi
Just got caught with this same issue. I solved it by taking off the lower plastic panel and giving the silver metal unit at the bottom of the column a few whacks with a spanner. Bingo it’s freed up.
Thanks so much for posting this, I had the same issue ordered the part and it solved straight away saving me a lot of time and money in diagnostics and repairs.
This worked for me too. Fixed it today following your instructions. Thanks.
Excellent, just a heads up, sometimes you will get the error message again, with some clicking from the passenger footwell, its the relay. Just be patient and remove the fob and re insert until the message says "key docked" and then she will start. It doesn't happen very often but be prepared so you don't get upset lol..
@@michaelstanley3961Thanks, I will keep it in mind. I can't tell you how helpful the video has been to get me back on the road.
Thanks for this, I ordered one of these, it arrived today and the car started first time. Hopefully it lasts a while.
my Freelander 2 from 2010 just today greeted me with such information :)
I will order the module and check if it works
Should be fine
Hey. Is it only 2 screws on that cover plastic? I take them off, but seems like the plastic is glued
A big thanks 🎉 for this video. This worked 100%
How long will it last if you have a reply it would be great. Thanks again
So about 3 years. Sometimes get the error, but remove fob put back in, you will see the key docked message and off you go, enjoy, Mike
Done this car starts but steering is still locked
Hi, brill video, we are having the same problem,could you share the link for the module you purchased, thanks
Russ
Hi I have this problem currently with my 2007 Landrover freelander2 , very much appreciate your video,
Question I can not see where I can order this part from,
Cheers Nigel
Hi my emulator stopped working after 3 weeks now car wont start again with steering colomn locked emulator is still plugged in? Took live off battery for a few mins put it back on put key swob back in but message still says steering column locked ? What next p.s i did just replace a backup key swob with a new one as the wife said 1 day before msg came back the key swob was playing up not unlocking the central locking etc so ordered new fob case and battery installed and soldered new battery pins onto key swob circuit board then thats when the message steering column locked came back
Hello Michael
My vehicle is due it's Mot soon, and I have this emulator attached now. Do you know if it would pass it's Mot with it attached?
Thanks
Hilary
This will in no way affect your MOT. And mine passed two weeks ago with it fitted. So no worries. Mike
@@michaelstanley3961 That's good news. As usual thank you for the information and stay safe.
My freelander is currently disabled due to the locking issue, Covid-19 has closed my garage of choice. I've ordered this unit to see if I can get the car moving again!
Richard all I can say is that it worked for me and continues to work. Mike
hi , did you get it and make it work ? i have the same problem and i wonder if it work for all as a commun issue
Yes, it worked! Sorry didn't see these replies. Cannot fault the device.
@@RichardJohnson-gz8nj OK great , hopping it will solve my problem , i've just ordered it , there a special order to plug it in like batterie disconnect ? or leave the key in ignition when plug the device ? just asking . thanks for your respond @Richard Johnson
@@hamieuxcarl69 I just got access to the unit, with the battery connected and swapped the connect from the locking unit to the emulator. It was that simple.
Thank you sir does the mi do module have a part number
Has anyone used this long term yet and had any issues. I read that with this fitted the steering lock could activate while you're driving ,causing a possible bad accident . Has this happened to anyone ?
No issue reported on here or anywhere yet. I've used this since the video while I have seen the message while stationary but no lock. Just re insert the key, never seen whist driving.
thank you Michael ...
your video and link was 100% helpful
Hello Michael, i want to buy one of theese, because i am recieveing the same message on my car! Can you please better explain where exacly do i have to plug the module in , 3:11 in your video? Because i dont know how to find that exact wire.
Thanks in advance!
Sorry for the delay, the module is located under the steering wheel and is a blue plug, this plugs into the unit. The module has a volvo sticker on it
Hi Michael, it worked thanks! Did you leave the part in or take it out after it started? Thanks
The emulator I ordered is a bit loose once in the connection. Do you know if I can leave the black connector out of the blue connector or does it have to stay in? Thanks again
Unit stays in place
Hi Michael! My range rover evoque has same issue. Do you know if the solution will work for evoque as well?
If it's the old evoke, then it's a freelancer with a different lid. You need to remove the lower steering column case and see if it's the same Volvo unit. I think you will find it is. Land Rover /Ford used so many of the same parts across the early models. Mike
How did u get the connector out I can’t get it out didn’t show that on the video
You need to pull out the black part of connection NOT THE BLUE PLASTIC BIT squeeze it and pull it, it’s a bit tight. Thanks Gerry
Posso avere link dove acquistarlo? Sono in italia,.... ma la comnessione cavi e gia fatta per inserire nello spinotto originale? O va modificata?
how do you disconnect the steering module? Is that the volvo part? mines is the same,its just sitting in my driveway just now......
its the volvo part, pull out the connector on the left side
@@michaelstanley3961 Thank you.
Brilliant, thanks Michael it works perfectly
Glad it helped, its a real pain in the arxx, and a simple fix
Thank you Michael!!!
I have just ordered one, I'll update once I receive and test,
Regards!!!
Hope you enjoy it!
@@michaelstanley3961 Sorry to inform, I was so excited I recived my order and plugged it in but it didn't started the car,
I see the light coming on on the emulator but when I'm pressing the start button it's not starting, I tried various slots but no joy!!!
Any thing you can recommend!
I have 2008 freelander, Volvo steering lock P31202096 fitted with car,
Any suggestions would be appreciated!!!
Kind regards,
Ravi.
Thanks for this information, I've just fitted mine and putting the key in made the car initialize normally (door open chimes, etc) but when I pressed start there was a click and everything went dead. Couldn't remove key, etc. After disconnecting the battery for a few minutes it actually started. Then I drove to the shop and it did it again, had to disconnect battery twice to get it running again.... any ideas please anyone?
I ordered this module
I got the new version of it
It starts the car correctly but does not unlock the steering wheel
Also the sound which the module makes is very weak
So is the steering wheel actually locked or just the message?
@@michaelstanley3961 no message
The car starts fine, the steering wheel remains locked
Update
The first time connected the emulator it gave a weak broken sound and the second time it never worked again. Does not turn on
@@SandeepOemraw need to speak to the oem
Hi. Can you show me the link where you bought the module?
www.mk3.com/land-rover-freelander2-l359-2006-2014-esl-elc-scl-steering-lock-emulator
@@michaelstanley3961 cheers mate
Hi Micheal did you still have the clicking after the part was installed? Mine still clicks but works fine
Occasionally. Also if the battery is disconnected the fault returns on the screen. Just pop out the fob and the key docked message comes up and off you go. It seems the cpu reads the fault code and defaults to steering column locked when it clearly isn't. So don't panic if you see it. Enjoy
Hi my emulator stopped working after 3 weeks now car wont start again with steering colomn locked emulator is still plugged in? Took live off battery for a few mins put it back on put key swob back in but message still says steering column locked ? What next
Please give me a link to the product?
Mine starts the engine but the steering is still locked, how do I overcome this issue.
@@stephenhodges7839 is that a message in the screen or is it physically locked. Mike
@michaelstanley3961 no mate, physically locked.
@@stephenhodges7839 Never seen this before. I'll do some research and come back.
Hi thank you. Pluged in emulator car started. But when trying to drive steering locked so had to unplug it, am I doing something wrong. 2009 Freelander 2. 2009. Thanks
Hi. Do you mean the steering actually locked or the message came up? Every now and again I get the same message, I remove the key and then re insert until the key docked message comes up. I have never had an actual physical steering lock issue only the message. Merry Christmas Mike
I have brought 3 modules now, they last a few days and then i have the same problem, what do you suggest?
What do mean by they only last a few days.I assume you mean the message returns. But remove the key and give it a few seconds then refit until it says key docked the car then starts no issue. I get it once a month or so but no problem. Please clarify. Thanks Mike
What’s the name of the piece?
bought 3 of these and still it doesnt work......whatam i doing wrong here?
Hi. maybe the module is not the issue, does te error message clear at all
Great video sir! , Is there 4 wire on original module? , Can i use this for jaguar s-type? Because my jaguar have same code and car won't start. Thx for your help. 🙏😀
Go on the modules makers website, it details what models are covered and they might have others. The S type was made under Fords reign over land rover jag and they shared many components and systems across the platform. Good luck Mike
It starts it but then locks the steam up ing wheel
Are you leaving the modulator in place?
@@michaelstanley3961 yes I leave it plugged in
same here, it will start the car, but will lock the steering wheel..dont know why
Q se llama ese simulador
Где купить блок скажи пожалуйста
Amigo quisiera que me ayudara con ese mismo problema así tengo mi lad rover
Hola. Cómo puedo ayudar
There is anybody here for who this emulator didn't work?
I got one and is not working.
Contact the seller and get it replaced, they are really helpful
Hi Tomasz, my emulator didn't work, I called the supplier and they are sending new one for me,
Did you get second one yet?
How did it go?
Please inform as I'm looking for ideas!!! Model number on my Sterling lock is Volvo P31202096,
Regards,
Ravi
Just got caught with this same issue. I solved it by taking off the lower plastic panel and giving the silver metal unit at the bottom of the column a few whacks with a spanner. Bingo it’s freed up.
Yup it will work for a while, but could lock up again, even while driving..