I’d love to know what timing numbers were used and that pipes Physical dimensions and I’d copy this setup in a heartbeat!!! Woohoo!!! Looks like a freaking blast!!! 😂👍👏😎
High compression diesel piped chainsaw... work smarter, not harder. A 2 stroke is almost worthless without a tuned pipe, and they don't HAVE to be that big. In-fact, if you used a tuned 2-stroke, you can make the engines much smaller, yet just as powerful = MORE POWERFUL!!
Martynas Uzkuras Well... I make mistakes, my brains aint all there!! Might being running on a ethanol/methanol/moon-shine-oil mix or something... just about anything is possible.Look up "Leaf blower running on diesel"... Might have to mess with the jets for a few hours (unbelievably finicky). But it would produce more power,, and you wouldn't need a spark plug if you raised the compression ration... but then bang-pooof!!.Any engine can run off of diesel with higher compression ratio's... but fuel mapping and messing with jets on a fuel delivery system made for gas would have to be completly reworked, as well as strengthening the materials/medals used in the engine..Carbons, I'm positive don't come from just the gas or diesel... it comes from additives like carbons/gun-powder or something... I mean geez, they can't figure out a better fuel mix to illiminate the violent knock in diesel engines??.The confederates should have won the war... now we are all owned by the monkeys, and they are running a muck with tax payer money!!
You have no idea as to what you're talking about. You need an "injection pump" on a diesel to control the timing. You can't use a carburetor and expect it to run right. In fact, with enough compression to create ignition, the timing would be too far advanced to get the thing started using carbureted fuel delivery, especially once warmed up. And when you compare apples to apples, naturally aspirated, same displacement, gasoline vs diesel, gasoline engines make more power. Go look at tractor power test results from back when they offered the same engine in a tractor, available in either gas or diesel versions. The gas always made more power than the diesel...
He does have a point though, it is not good practice to Drop start a saw. As a mechanic I get to see the results of it all the time. Good way to eat up starter pulleys and snap ropes. The ol Swing start method was great for that.
Military Chevy yea, because pulleys and ropes are sooo expensive. Better than accidentally touching your saw to the dirt picking it up from the ground when it’s running...
Woah, I have never seen chainsaws like this fast
Don't care what anybody says it's faster than anything I got
Hella fast my 125cc McCullough hotsaw wont keep up with that
Very Impressive!
good Lord. I'd be a liar if if I said I wasn't impressed... What in the world....
Gnarly Echo!
Wow fast......8” pine beam😂😂 how about a video thru a hardwood 12” log
I need to know those pipe dimensions!!! LMFFAO!!! Awesome job dude!!!
Amazing!
I’d love to know what timing numbers were used and that pipes Physical dimensions and I’d copy this setup in a heartbeat!!! Woohoo!!! Looks like a freaking blast!!! 😂👍👏😎
I'm sure there's a tad more work done as well. But yes like wise.
Amazing!!!!
scary loud saw & quick torq
Holy wood cutting echo😧
*Running super lean.*
Some racers do push their saws to the lean side for revs. It’s not meant to be in the cut for hours at a time.
Only running for at most 2min
👍👍👍
Cause why not
Needs a Reed valve and some methanol with a touch of nitro.
Its already running that you can tell from how high it revs but is has no nitro
Never seen an echo worth anything before
Baroooom!
She’s a runner isn’t she.
Ohhhh😂😂😂😄la motocierra ax100
0:29 waaaaaaaaa
😁👍☕
Wow
FAST !
Holy shit
Nos Injection?
Awyea...
👍👍👍👍👍👍👍👍🇹🇷
Beasty ass saw
@marioseanzlandscapingservices.
High compression diesel piped chainsaw... work smarter, not harder. A 2 stroke is almost worthless without a tuned pipe, and they don't HAVE to be that big. In-fact, if you used a tuned 2-stroke, you can make the engines much smaller, yet just as powerful = MORE POWERFUL!!
diesel?
Martynas Uzkuras Well... I make mistakes, my brains aint all there!! Might being running on a ethanol/methanol/moon-shine-oil mix or something... just about anything is possible.Look up "Leaf blower running on diesel"... Might have to mess with the jets for a few hours (unbelievably finicky). But it would produce more power,, and you wouldn't need a spark plug if you raised the compression ration... but then bang-pooof!!.Any engine can run off of diesel with higher compression ratio's... but fuel mapping and messing with jets on a fuel delivery system made for gas would have to be completly reworked, as well as strengthening the materials/medals used in the engine..Carbons, I'm positive don't come from just the gas or diesel... it comes from additives like carbons/gun-powder or something... I mean geez, they can't figure out a better fuel mix to illiminate the violent knock in diesel engines??.The confederates should have won the war... now we are all owned by the monkeys, and they are running a muck with tax payer money!!
+Brian Davis Who helps you tie your shoes in the mornings?
+Josh Carmack The p[resident of the united states... need his help because I often put the shoe on the wrong foot!!
You have no idea as to what you're talking about. You need an "injection pump" on a diesel to control the timing. You can't use a carburetor and expect it to run right. In fact, with enough compression to create ignition, the timing would be too far advanced to get the thing started using carbureted fuel delivery, especially once warmed up. And when you compare apples to apples, naturally aspirated, same displacement, gasoline vs diesel, gasoline engines make more power. Go look at tractor power test results from back when they offered the same engine in a tractor, available in either gas or diesel versions. The gas always made more power than the diesel...
Dag.
Bad, Ass!!
Hahahaha what are they cutting thought ,a paper beam
E Moo look like wood
Mississippi Mud Team hahahaha not hard wood, dumb ass
The scandalous rake dimensionally slap because motion neatly object following a last waiter. magical, illustrious pear
Please study physical laws & than start you saw secure way, not this dangerous stupid approach. lol
he started it like a man not a pussy
You're gonna critique an obvious skilled professional of such a caliber as this guy while you misuse the word "than" where you should've used "then."
He does have a point though, it is not good practice to Drop start a saw. As a mechanic I get to see the results of it all the time. Good way to eat up starter pulleys and snap ropes. The ol Swing start method was great for that.
Military Chevy yea, because pulleys and ropes are sooo expensive. Better than accidentally touching your saw to the dirt picking it up from the ground when it’s running...
Under the leg pull start works for me. This guy is awesome