2021 GMC Truck Debadge: swap out the GMC logo on tailgate
Вставка
- Опубліковано 13 сер 2021
- Debadging cars and trucks here in southern California is very popular.
The truck debadging video today is on a 2021 GMC truck where the original GMC tailgate logo was not properly aligned from the factory.
The Expert at Auto Fetish not only performs a badge delete of the stock GMC logo emblem, but replaces it with an updated black GMC logo while simultaneously positions the replacement emblems so they are perfectly aligned.
Many Chevy and GMC truck owners want to replace the original equipment truck emblems with updated aftermarket emblems for a more custom appearance to their ride.
With this time-lapse detailing video, the Expert of Auto Fetish Detail highlights the many steps of truck badge removal and badge replacement of the GMC factory logo.
If you are in the Orange County, CA area and want the expertise of 30+ years, reach out to the Expert at Auto Fetish Detail:
The thrill of victory is brief compared to the lingering regret of defeat called a mistake that cannot be fixed!
Car/truck debadging: When you absolutely, positively need it done right the first time.
Auto Fetish Detail: www.expert-mobile-car-detaili...
Are you out of our service area and looking to debadge your car or truck yourself, then use the links below to get the same products Darren uses professionally:
3M Stripe Off Wheel: amzn.to/2OPoXld
Rapid Remover Adhesive Remover: amzn.to/30YlYcD
40 lb. Test Fishing Line: amzn.to/3c4uMnQ
Ceram-X Car Polish: amzn.to/2QdL8lk
#truckdebadging #GMCtrucklogo #gmctruckbadgedelete - Авто та транспорт
Great video, but can you post what your spraying on it in the various stages. Also what was it you applied with the orbital polisher?
Darren Thank you for showing US the detailing community how to debadge a GMC Truck. It's all fun and games until an uneducated person or someone who is not trained damages a vehicle. I am grateful for every VIDEO that Darren Priest post I learn something every time from him. He has a lot more experience and just him taking the time to show me and the community how to do it correctly is PRICELESS! Thank you Darren Priest for everything!!!! #autofetishdetail
You bet!! Thanks for tuning in Lawrence!
I just recently ordered a 2024 Blacked out Elevation with the Premium and X-31 off road package. GMC Emblems will be blacked out also. Damn that chrome frame really pops on the Onyx Black. Wish I had seen this video before I placed my order.
Man that was clean. I’d love to have it done on my 19 elevation
Thinking about adding some badges to my tailgate. Currently there is none. What would be the best way to put them on straight and level after I decide where I want them? Thank you
Damn that looks good!
As always awesome video and tutorial good friend. B well
what's that green tape you use to help align the lettering?
Love the shirt 👌
Darren can do what he wants it’s his channel,
I’m thinking the GMC badge was crooked amongst other things because the Company sold out for cheaper labor , I think I would have preferred that big logo off the vehicle but to each his own .
Thanks For the video Darren …
I put the exact same badges on my sierra, but I had the dealership do it; and now the top half of the M isn’t even touching the tailgate. I pulled up this video just to see how they were attached to the tailgate, and didn’t realize it wasn’t clipped into the tailgate at all. The dealership was going to throw away my stock emblems, and acted as if they had to be damaged to be removed; and that they couldn’t be reused. So I assumed they were held in by a clip of some sort. Now I realize it’s just a bonding agent holding it on the tailgate, and its basically peeling off.
Any suggestions on what I could do to fix it and prevent it from falling off?
Where is the best place to purchase both badges? GMC
Width of the tape between letters?
What is the name of the yellow pad that you're using with the drill to remove the residue? Also is a product like Goo Gone, which is commonly available, okay to use on car paint and clear coat?
Its a rubber eraser sometimes called a wonder wheel, amazon has them for like 14.00.
What is the green tape used in the video
Did you just buy new black letters?
My 2023 GMC Denali 1500 just arrived at the dealership. I ordered the black GMC badging and the front and removing the 'Sierra' badge from the rear is a no brainer but I am torn with two options. 1) Replace the red GMC badge on the tail light with black or 2) Just leave the Denali badge on? I think it may look like an empty spot where the GMC badge is suppose to be?
Yeah I feel your pain. 2019 1500 Denali I took off all the emblems just left the GMC. Now my truck looks awesome just need the black grill
If I don't have a stripe off wheel, can I use an adhesive remover or Wd40 with a credit card to get the gunk off?
Sure...if you don't mind a big, fat mess and some scratches from the credit card. I would recommend peeling double-sided tape with your fingers with no chemicals first. Use your finger to "roll' the tape off. Once you have the bulk of the tape removed, then you can use a chemical of your choice to remove the remainder. You can use rubbing alcohol, or acetone as a rule also to remove any residual adhesive and I would recommend a microfiber cloth at that point. I fix plenty of people who hastily tried to remove the emblems themselves in a manner you describe that resulted in them putting plenty of scratches into their paint.
I have yet to see these emblems applied straight unless it was redone by the owner
1st
Nice job, but completely unnecessary…. I paid my local GMC dealership to swap the red to black for $217 parts/labor. It literally took them less than 30 mins.
I think your comment is completely unnecessary.
No more debadge videos, ur need for attention is getting old!
Interesting...my need for attention? Or my attention to needs? A customer who needs this type of work done to perfection is indeed in need. In need of my attention to detail. Both what they want, and need.
@@autofetishdetail want and need. Thank you for the video.