You have inspired me brother, I have watched you ever since the beginning man, you have come a long way and your truck looks gorgeous!! I know it isn’t everyones favorite but I got a 88 IH Cabover that I am working on right now so I can start running a truck doing local stuff in Florida, I have always loved a big rig and love driving them, don’t know everything to get started but I am so ready for it to be on the road, love being a Journeyman Lineman but driving a sweet rig is something I have ALWAYS loved doing. Keep up the good work brother!!
I know that to engage the pto you need the clutch but once is engaged can you just let the clutch go like nothing and then raise the bed? And when raising the bed can you just pull the knob like nothing or you have to do it slowly??
Just thought of something? I'm curious how you can go before you have to refill the hydraulic tank for the PTO system to work? Also how big is the tank on your truck?
How much weight/material can that trailer haul? I pull a tri-axle end dump trailer that can haul 30 ton/22 yards. That pile of stone looks small for that length of trailer
Saludos espero que estés bien cambiaste el camión o es que tienes ese otro está bonito ese t800 cuídate mucho un fuerte abrazo desde Puerto Rico mi amigo
Truck sounds good How much did you weigh empty ? How many yards can you haul on your trailer and how much did you weigh loaded bro ? I enjoy watching your videos Thank you
Bro nesecito comprar una gauge de un kenworth t800 2005 la que va al lado derecho del speedometer!!! Saves de algún lado en Houston k la puedan tener??
Absolutely love your videos man gives everybody a perspective of a day in our lives
Hmm! Yes that's right amazing video on end dump trucking. I pulled an East/Clement dump wagons. #keepontruckin 👍
Nice seeing a UA-camr doing these vids on the dirt business , I personally drive a transfer out here in Cali- Bay Area . Buen video 💯👌🏽
Thanks for bring the memory back because i used to ride in the truck like this when i was with my POPPY!
Really diggin the steering column piece
This is why i got the license category 9. Excelente video compa y sigue hacia adelante saludos desde Puerto Rico 💪
There is nothing I love more than watching your channel and listening to you shift man 😍
12:50. Gotta respect the parking technique and experience.
Good video as always 👍
I’m a Peterbilt person and I love the way your truck sounds
Just noticed the hole where your cb antena cables go into your cab. Gotta get some rubber grommets and silicone for those man.
love your vids!!! I always learn some new technics with your shifts, im new to this.
Love the truck but it was so satisfying to watch the unload of gravel it looked like flowing lava or something lol
You have inspired me brother, I have watched you ever since the beginning man, you have come a long way and your truck looks gorgeous!! I know it isn’t everyones favorite but I got a 88 IH Cabover that I am working on right now so I can start running a truck doing local stuff in Florida, I have always loved a big rig and love driving them, don’t know everything to get started but I am so ready for it to be on the road, love being a Journeyman Lineman but driving a sweet rig is something I have ALWAYS loved doing. Keep up the good work brother!!
I know that to engage the pto you need the clutch but once is engaged can you just let the clutch go like nothing and then raise the bed? And when raising the bed can you just pull the knob like nothing or you have to do it slowly??
Yes once engaged you can let go like nothing, and to cut it off I never clutch i just turn it off
Man you inspired me to be in this trucking business. I hope I passed the test next week
I hope you do welcome to trucking
Good luck man!
Did you pass?!
Hey bro I love your videos when you hit that that jake your truck sounds goooooooood
Hey bro, nice to see ya! Greetings from Denton Tx
Nice video! You back that truck up like it was nothing. Lol keep up the great work and video.
Good gawd I wanna drive now!!!
Another great video
damn that jake is music to my ears 🎶 👂
Just thought of something? I'm curious how you can go before you have to refill the hydraulic tank for the PTO system to work? Also how big is the tank on your truck?
Again with another awesome Video man...Keep em coming
Are you plant to plant? And how you have load board or get dispath?
I actually buy and resale so don’t go thrue dispatch
How long is that trailer?
I think it’s 35
Nice truck from los Herreras truck sales los número uno en pencos!
They have good trucks
Man, I love that intro!
buena precision ahi en la reversa, un 10 !
That jake is 👌😍
this video came out on my bday lol
The skill😫💪🏽
Great truck, great guy, great job...love it👍
Oh god mi loin machine sound sweet king 🇯🇲🇯🇲
Excelente vídeo colega que chulada su T800 saludos desde México ✌👆
Were is this filmed at ..mexico or America???
The greatest country AMERICA 🇺🇸
Super bien el video sigue asi 😎
Saludos y bendiciones desde El Salvador.!!!! 🇸🇻👌
Damn good loader man..
Do you or have ever go otr ? Just curious
No local hauls only. I went to Louisiana once to haul debris but that was it
I’m wanting to get into the end dump business. What is a good rate by the ton that is good?
That's a 10 speed right ?
Yes sir
Good job well done 🥰
Man you have the career I’d love to have. Sweet truck too
Thanks 🤝
Backing that trailer up like if you had a 360 degree camera
How much weight/material can that trailer haul? I pull a tri-axle end dump trailer that can haul 30 ton/22 yards. That pile of stone looks small for that length of trailer
24 tons that’s what I had loaded, that puts me at 79/80k gvwr
@@Grtruckingdemolitionllc the truck i drive is plated for 100k
Aaron Hamming I have been at 98k gvwr mostly only haul like that during night time.
Mane be shifting the hell outta that KW
You past by me on McCarty going to the landfill. You took a right going the newer location. You were in the Dodge jaja.
Im always there
Good job in there, normally the places iv dumped into over the years have higher walls.,
The transmission looks like a 9 or 10 why does it have the range selector like that?
10 speed/ I put it like that
Us that the sand pit out off 242 in spring/ conroe you went to
It’s the one in Cleveland on 2025
💨💨💨🔥🔥🔥 roll the bad ass coal 7:25 10:34
Can you advise on who can give me local loads in Houston hauling dirt? Appreciated your response
Saludos espero que estés bien cambiaste el camión o es que tienes ese otro está bonito ese t800 cuídate mucho un fuerte abrazo desde Puerto Rico mi amigo
wey! ! llena el remolque que valga la pena la vuelta llevas la pura muestra de graba Saludos !!!!
When did u start driving
2 years ago
I haul rocks too but I use a belly dump.
Do they ever get stuck when pulling forward ?
@@Grtruckingdemolitionllc sometimes
Love that truck yo!
Truck sounds good
How much did you weigh empty ?
How many yards can you haul on your trailer and how much did you weigh loaded bro ? I enjoy watching your videos
Thank you
35k empty / 84k loaded
What engine is ur truck?
C15
What year is your kenworth
2003
Mines a 2019. I like yours better
Love your truck man, as a fellow driver how could I get myself into driving a end dump for someone?
Go to sand pits/ dirt pits and ask the other drivers who they run for and get his contact
I was looking into driving end dump. What kind of money can I expect driving end dump for someone else
How u get into end dumping
My dad does it
could you do anymore jake brake compilations?
O yess I need to do some, will be doing a jake compilation of my truck
He gangsta hopped out the truck without setting the brake😂
Look again, I never get off the truck without using my brakes
Hell yeah new intro ?
Hermano! You straight gangster with that truck! You backed it up as easy as I back up my corolla! What’s the wheelbase of your truck?
Thanks man, I have never checked the wheelbase I’ll be doing that soon
What engine
C-15 6nz
A cuanto te salió Esa kenworth ? Y cuanto pagaste por ese end Dump Carnal? Awesome video 😎🤙🏽
24 por el kw y la traila es de mi jefe.
Grtruckingdemolition Orale bro a toda madre that’s what I’m looking to get thanks for answering ! Saludos desde El Paso Texas 🤘🏽
Pregunta para que es el botón que le mueven cuando paras y avanzas?
High y low? En la palanca dices ?
Si abajo que siempre le mueven abajo de la palanca
How much horsepower should one use for end dump?
You should be good anywhere between 380/450hp. Depends the truck like older Mack’s or big cam Cummins did not have to much HP but are strong engines
What the average you make on a load pal ?
Also god bless you and your fam great work and motivation brother 🙏
Is that a cat motor sounds like lone wolf
Yes sir c-15
Drive safe
Perron 👍👍👍👍👍
that big ass dump trailer, is that the only type of dump you guys are allowed to use in texas?
No many different kind of trailers down here, we just happen to have been working with these for a long time.
Grtruckingdemolition I run with a 23FT only ones I usually see up here in the Chicagoland
Bro nesecito comprar una gauge de un kenworth t800 2005 la que va al lado derecho del speedometer!!! Saves de algún lado en Houston k la puedan tener??
Yo tengo una nadamas necesitas los gauges porque los que tengo están dañados. Pero si es para 9.
@@Grtruckingdemolitionllc si lo que nesecito son los gauges!!
🖤💪🏽💯
Chingon 💯
When are you going to put a real tarp system on that trailer
Says the one he has works perfectly n doesn’t really needa make that a priority.
Whenever I’m not able to get on the trailer and do it myself
Una pregunta como en cuanto sale una traila como esa 👍
Unos 30mil
Saludos deverias d hablar español como antes lo asias ay kedamos pendientes
thats a quarry
Bro you should get the mud flaps in front of the wheels for the back so it won’t dirty the cab and diesel tank🤙🏾 @12:12
Hes ordering fenders for it. Hes been saying for awhile he knows he needs them.
Nice sounding truck bro, btw do you have some Hispanic in you, it sounds like it to me, I hope I don't sound mean I'm not trying to be😁
Bro cuando abres un canal de español saludos desde mexicali
My boi stop fronting #290TRUCKIN
You know you a soldier when you jump out ya shit and don’t set the brakes
Lol I did set my trailer brakes, just used the valve on my steering column that’s why you didn’t catch it
My dad haul scrap
👍can I get a shout out
Parecida a la tuya k tiene 9 relojes!!
Spanish please 🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🇨🇱🇨🇱🇨🇱🇨🇱🚛🤙🏼