@@BNRCustoms hey bro i added those cups in the rear on top of the springs to keep cylinder from rubbing the sheet metal when raising or lowering the rear I just got it done so ima go try see if it’s good
Great videos, I recommend the black magic drop mounts for the rear-end and reinforced the stock trailing arms, and used double donuts in the front or custom ones twice as thick as what the hydraulic companies sale, reinforced the ears and outer perches for the front A arms due to the 8 inch strokes in the front, unless you going to be running the least amount of spring to lay low
Thanks man. I have the drop mounts from black magic. Just haven’t put them on yet. And I already have adjustable upper trailing arms. I’ll probably end up doing the same for the lowers. Why double donuts? And the front a arms are fully reinforced as well
Rap to the beat while hes welding Ay Yo Yo Sittin indian style Under my car (under your car?) If the jack stand fails I won't be walkin too far (probably be dead nicka) Gotta get these hydraulics in (Why's dat?) So i can get out and be frolicin' (With what?) A feermay hyna ,aka female mexican (Oh i want hydraulics now too doh!) Rap by E-Phony and the Glick
Coil under is an old school set up 💯💯 it’s a gangster set up really lowers the shit out of the car. It’s just dangerous you hop wrong or hit a dip that coil will shoot out.
Hank hill building Bobby a lowrider 😂
Never under estimate the power of propane...I'll tell you whot
😭😭😭😭
Gawd dayum bobby don't hit that switch
Thanks ! I’m getting into hydraulics and this will help!!!!!
sick build
Looking good man can't wait to see it done, much love from the 541
Thanks man!
@@BNRCustoms hey bro i added those cups in the rear on top of the springs to keep cylinder from rubbing the sheet metal when raising or lowering the rear I just got it done so ima go try see if it’s good
Looks good man ..nice work I enjoy your videos very informative 🤘🤘
Thanks bro!
Where did you find a little caps on the rear cylinders
Is CCE hydraulics a good place to buy Hydro kits?
That’s where I got mine. A lot of people in the comments say their cylinders bend easy. But I definitely believe it’s a good starter setup.
I got cce and they are good for a starter kit just keep on upgrading everything and have back up just in case
Great videos, I recommend the black magic drop mounts for the rear-end and reinforced the stock trailing arms, and used double donuts in the front or custom ones twice as thick as what the hydraulic companies sale, reinforced the ears and outer perches for the front A arms due to the 8 inch strokes in the front, unless you going to be running the least amount of spring to lay low
Thanks man. I have the drop mounts from black magic. Just haven’t put them on yet. And I already have adjustable upper trailing arms. I’ll probably end up doing the same for the lowers. Why double donuts? And the front a arms are fully reinforced as well
Did you shave the coil flat like that (where the deep cup sits)? Or did you buy them like that?
They come like that
Great Video... Just curious on your location and if you're taking on any work ?
Thank you. We’re in South Carolina and it all depends on what you want
Gas tank in is ok?
What size welder are you using
Its A Lincoln 250
hey man nice video! did you read springs ever squeak? i just got my ball joints with springs and it squeaks loud
What size are your rear cylinders
Great stuff!! Subbed
What were those covers around the cylinders originally from?
They go around the plumbing vents that you typically see on top of houses
@@BNRCustoms o ok thanks and good idea
6:34
Seems like you dogs are digging it
What kind of welder you use
Lincoln 250
@@BNRCustoms comes out clean 👌
Don’t see much frame reinforcing on the from frame section by the firewall
Least the rear-end is brace
Need framework from rust and stress points reinforced
You need to drop your upper trailing arm mounts big dog
Might wanna throw some paint under their gonna look nasty locked up looking at all that rust
Planned on it. Had to get everything welded up first
You in Tennessee? Come do my car
Looks like dogs want Hitt switch
I can tell those are some use hydrualics
Hahahah..that thing is going to fold up like paper first time you bounce it..
Probably
Lmfao 🤣🤣🤣🤣🤣🤣
Rap to the beat while hes welding
Ay
Yo
Yo
Sittin indian style
Under my car
(under your car?)
If the jack stand fails
I won't be walkin too far (probably be dead nicka)
Gotta get these hydraulics in
(Why's dat?)
So i can get out and be frolicin'
(With what?)
A feermay hyna ,aka female mexican
(Oh i want hydraulics now too doh!)
Rap by E-Phony and the Glick
Bend in half 1 lick. Good skill & work though.
I'm late!
I like the videos but I lose interest during your long cut and weld sessions.
Thank you! Do you enjoy the time lapses at all or should we try something else?
Coil under is an old school set up 💯💯 it’s a gangster set up really lowers the shit out of the car. It’s just dangerous you hop wrong or hit a dip that coil will shoot out.
Dope Video
Helped My partner and I 🫡