HYDRAULIC UPGRADE FOR MY CUTLASS!
Вставка
- Опубліковано 5 лют 2025
- We finally got around to installing my new ADEL Dump and Marzocchi #11 Gears on my Oldsmobile Cutlass. Don't forget to like, comment and subscribe! Thanks for watching!
Follow me on IG @rj12.21
Music By:
Song: LAKEY INSPIRED - Blossom
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution-ShareAlike 3.0 Unported
Video Link: • LAKEY INSPIRED - Bloss...
That's the way .nice and clean out and clean work and clean back in.now thats pride.
Nice bro!!! All original. Quiet sleeper. My kind of car!
Thank you 🙏
Nice bro, setup looking firme, gonna hook my cutty too soon just got it out the paint booth, dope videos! My pops and i are going to be doing set ups too now so glad to see you guys doing the same thing✊🏽
thank you!
Nice ride bro. Setup looks good. Makes me want to do some upgrades to my Lincoln.
Thanks! Can’t go wrong with hydraulics
@@RJWilson I have a 3 pump set up like yours but I think I need to upgrade like your setup
Dope video cutty slowly coming along 😎👍🏽
Thank you 🙏
Keep on LowRideing bro this Shit is Fun and you will learn from every problem which is fun Knowledge to me..injoy
Great video.
U can fit two more batteries in the trunk..
Jus straighten out the battery rack flushed against the rear quarters, u can add a battery to each side..
And if u want good 3 wheel get some 12-14 inch rear cylinders.. and u good to go . You'll have higher lock up in the rear
I had 14” cylinders. I have another video when I did a chain bridge, check it out.
when working on your hydraulic system always disconnect the ground
Of course
Love your cutty! Im in the process of buildin mine!
Thank you 🙏
Snappy quick response nice
Looking good
Keep up the great content Brutha
Thank you! 🙏
Nice ride bro BUT BIG QUESTION....Did u do a partial frame wrap of is she stock framed??? JUST WANTING TO KNOW CUZ I WANNA DO SAME BUT FRAM WRAPS ARE COSTLY....plus not trying to make mines a hopper
Thank you 🙏 and yes it is partial wrapped
@@RJWilson can u PLEASE tell me where and how many inches of steal was used
@@Myco-T 1/2 inch or 3/8 plate should be enough just be sure to lift engine up away from frame so you can weld some plate under the belly or cradle aka sub frame that connects each spring tower in front and goes under the motor this is the main stress point in front and especially around the coil towers where the cylinder goes through be sure to weld at least a half inch plate between each upper control arm to extend the travel of your springs and a pro tip to avoid buckling your rear quarter panels always cut small holes in trunk to weld battery rack to the frame and maybe add some fiberglass putty inside each panel to reinforce the fenders so they don't dent in and out from added weight and stress G Body's are fun but we're not built from factory to hold 8 marine battery's in trunk lol
Nice, can you post a picture of the button on the ADEL. I've never seen one. Aslo more tire pressure is more inches (and less damage to the rim) another thing, i could tell if you were in park or neutral but you DON'T want to hop in park. 👊🏽
I always hop in neutral and dm me on IG and I can show you the button
Hey big homie great video.. look you most likely bought an adex... Not adel. But bro it's cool how you can see the difference. Keep up the work. I used to judge the hop for lowrider magazine in the Early 90s. Met many hoppers
I’m pretty sure he meant he got the Adel-2 from black magic hydraulics. I got one of those too but haven’t used it yet, still doing sheet metal work on my 66 Caprice. Looks like the Adel-2 works nicely I was wondering about that
Nice interior, bro
Thank you 🙏
the #11 marzochi pumphead works best with more than 6 batteries use a 9 for better response with 6 to the face
Had #9 before the #11 and I could actually tell a difference when the 11 was installed
Good look!
Thanks! 🙏
What size steering wheel & adapter you have for your cutlass
360mm and fast steering wheel adapter
Great down to earth videos bro. Subscribing now!
Thanks for the support 🙏
@@RJWilson for sure! I have an 85 Cutlass, been building it for about 6 years. Love watching others progress, especially when the content is good and not crude and profane lol. God bless and keep up the great work!
🔥
Aye bro nice video I’m from Dallas Texas, do you know of any good shops for hydraulics?
A&A customs in Fort Worth did some work on my car and it was good work
Not bad looks good
Thanks 🙏
Are those Bad Boy pumps out of Dallas?
Yes they are
working on sound system in my cutty now and i see you have same set up that im running (3 pumps 6 batterys)... wondering what size are those subs and where did you put the amps at ? thanks in advance.
They are 10’s and the amps are under the front seats
@@RJWilson which brand subs did you have in there?
@@RJWilson and how did they sound in that box and being "sandwiched" like that, aka subs facing one another?
Dope 💯🙏
Nice cutty bro. Make sure u lift your back up all the way when ur hopping, it’s gunna feel hard but it will all line up and u will be hella good on the switch. And make sure u don’t hold the switch up. Nice cutty. And make sure u lift ur back up as high as it could go when u hop. PEACE
What happened to the after?
What do you use to seal the threads on the pumps/hoses?
Nothing on the hoses. Thread seal on the pump
wheres the button on the adel? I had a bent cylinder and had to release pressure at cylinders.
It’s on the bottom between the four screws that has the security seal on it
@@RJWilson ok thanx
You got any reinforcement on the front for hopping? Im new on my Regal w hydros too
Yes, I just got some new reinforcement. New video dropping today.
You need bigger springs in the front, I'm sure someone already mentioned
I have another video where I replaced with bigger ones
What size coils are you running?
I believe in this video they were 3.25, I am now running 3.75
Me again lol so you’re running 11 gears on 6 batts yeah?
Yes #11 gears on the front only
@@RJWilson damn I need me an 11 gear. I’ve got 9 Marz now on 4 batts. About to go a rack of 9 but probably only run 6 to the front first
We're did you get the 11 gear from
CCE
Thank bro
I never understand why people try to hop with the ass dropped. 🤷🏼♂️
I've notice that with a lay n play set up. Hopping with ass dumped. Gives a bit more weight distribution allowing the car to go little bit higher.
@@carloschairez9722 I get it. I could never, was always worried about hitting bumper or tank. I was more show than play though.
At least he’s not hopping with it in park 😂😂