Hi well done for the great job it is a bit of work...!! I have a red 1994 16v Turbo coupe modified and I done the same thing to mine....But now i`m reverting the dash stteering wheel and console back to original spec...!! Congrats
Hi no unfortunately I didn't is not compatible and too much work...I have a complete coupe 20v turbo for breaking but I couldn't do it...I done the easiest way modify the centre console...!! Now values for all coupe as a classic going up...and mine as low Kms so decided retore back to almost original...still have the doors recaro seats and seatbelts from a coupe limited edition...!! Cheers
Hey man, how did you disconect those center bottom console clips or bolts from the main console (im talking about that part that has the stereo)? I can see in the video before you start disassembling it they're already disconnected at 01:20
You first need to remove te buttons for the heating and then undo 2 small bolts. After that you can remove the centerpart and you will see 2 bolts holding the big part with the stereo. Hope this is what you mean, otherwise let me know!
@@jtscustomsNL I removed all the bolts, the only part that is being held is on both sides under the steering wheel and on the passanger side, its like a clip or a bolt
@@lukaspetkus6234 aaah now I know! Yes there are 2 clips, you have to use some force. You can, if you removed the stereo, see them from that hole and help the clups from above
@@lukaspetkus6234 haha awesome, the shiftknob can be pulled off and after that remove the shift cover. For the handbrake, I pulled it as high as I could and that gave me just enough room
Well done for trying !! Sorry it didnt go to plan. For your info ive sold my fiat barchetta as sick of the problems at annual test every year due to high emissions !!!
@@jtscustomsNL ...fahre selbst ein Coupé LE 20vt und bin echt begeistert von deinen/euren Videos. Da bekommt man Mut selbst ein paar Sachen zu schrauben und muss nicht immer in die Werkstatt. Danke...👍👍👍
Really impressive work, love the fact you persevered with making the “one off” centre console Have you altered the angle of the gear shifter? And…… Where did you get that awesome steering wheel from, absolutely love it!
Thanks man!! Yeah it was a lot of work and measuring. I did not alter the angle but I plan to install a short shifter. The steering wheel was made in england by someone, I cant tell you his name here unfortunaly.
take the 20v and put a crank, gear and cylinders from 2.4. you will have other possibilities. the fact that the lancia k motor is made of cast iron means that it does not break from the pressure of anything. it can reach up to 700 ps.
Bravo hai tanta pazienza !! La Fiat coupé è nel mio cuore !!
Hi, you (and your car) are so amazing:)) I like your videos about this car so much and I have same car but with 1,8 engine so you are my inspiration.
Thank you very much!!! So awesome to hear that! Good luck with your car!!
super job, for me is the first time watch this trasformation for the interiors. i like this :D
Hi well done for the great job it is a bit of work...!! I have a red 1994 16v Turbo coupe modified and I done the same thing to mine....But now i`m reverting the dash stteering wheel and console back to original spec...!! Congrats
Awesome! Did you manage to also swap the heater unit?
Hi no unfortunately I didn't is not compatible and too much work...I have a complete coupe 20v turbo for breaking but I couldn't do it...I done the easiest way modify the centre console...!! Now values for all coupe as a classic going up...and mine as low Kms so decided retore back to almost original...still have the doors recaro seats and seatbelts from a coupe limited edition...!! Cheers
Awesome job! I really like this videos
Thank you!!
Hey man, how did you disconect those center bottom console clips or bolts from the main console (im talking about that part that has the stereo)? I can see in the video before you start disassembling it they're already disconnected at 01:20
You first need to remove te buttons for the heating and then undo 2 small bolts. After that you can remove the centerpart and you will see 2 bolts holding the big part with the stereo. Hope this is what you mean, otherwise let me know!
@@jtscustomsNL I removed all the bolts, the only part that is being held is on both sides under the steering wheel and on the passanger side, its like a clip or a bolt
@@lukaspetkus6234 aaah now I know! Yes there are 2 clips, you have to use some force. You can, if you removed the stereo, see them from that hole and help the clups from above
Thank you! I got the whole panel loose but now I cant get it out, it gets stuck on handbrake and shiftknob, any tips on what to do now? ;D
@@lukaspetkus6234 haha awesome, the shiftknob can be pulled off and after that remove the shift cover. For the handbrake, I pulled it as high as I could and that gave me just enough room
Your best so far!
Thank you!!!
You're the only one on yt that show, how I work on this fucking dashboard, thanks 🙏
Haha thanks! Can be a real nightmare 🤣🤣
Well done for trying !! Sorry it didnt go to plan. For your info ive sold my fiat barchetta as sick of the problems at annual test every year due to high emissions !!!
Aaahh such a shame! So next up a coupe?? 🤤🤤
Did you get the steering wheel from Marius in the U.K. ?
Yes! He is the best in the business!
@@jtscustomsNL 😉 yeah he supply’s us too
The alcantara seats .. which car are they from? It is not from coupe right ?
No they are from a lancia delta HPE, they are not a direct plug and play and the rails are custom made
Could you please make a video about?
@@geniodelmaletuning3136 maybe I will, I got a new carpet to install so could upgrade the rails
Where i can find that front bumper?
You can buy it at AutoDS.net
Did you manage to make the start button work?
Yess! It works, I connected it to the wires at the steering collum
Tolles Video. Mehr vom Coupé!!!!!
Vielen Dank! Werde ich aufjedenfall machen!
@@jtscustomsNL ...fahre selbst ein Coupé LE 20vt und bin echt begeistert von deinen/euren Videos. Da bekommt man Mut selbst ein paar Sachen zu schrauben und muss nicht immer in die Werkstatt. Danke...👍👍👍
@@tomtaylor7724 sehr schön! Ja wir haben uns fast alles selbst angelernt. Mit einfache sachen anfangen und immer weiter gehen.
Very nice video...lekker
This Guy as two coupes ,i also have two ah ah cheers
The total is 4 coupes haha😅😅
@@jtscustomsNL ah ah ah ,im gonna build carbon or fiber glass bonnet ,cheers to you great videos
@@wolf-RC87 carbon fiber hood would be very cool!
@@jtscustomsNL hello the original Bonet IS so heavy,32 kilos ,so its a great upgrade in carbon or fiber glass maybe 15 maybe less will see.
Kudos on your commitment!
Thanks man!!
Really impressive work, love the fact you persevered with making the “one off” centre console
Have you altered the angle of the gear shifter?
And……
Where did you get that awesome steering wheel from, absolutely love it!
Thanks man!! Yeah it was a lot of work and measuring. I did not alter the angle but I plan to install a short shifter. The steering wheel was made in england by someone, I cant tell you his name here unfortunaly.
@@jtscustomsNL could you pm me the details of the chap re the steering wheel?
@@silverainbow123456 can you send me a message via Instagram or Facebook?
A fix camera would be nice during the disassemble process.
Maybe I will buy some extra go pros in the future, filming everything is hard and then the video will be 4 hours long 😅
take the 20v and put a crank, gear and cylinders from 2.4. you will have other possibilities. the fact that the lancia k motor is made of cast iron means that it does not break from the pressure of anything. it can reach up to 700 ps.
Something for a future project! Sounds amazing 😍
I think you should have used a steering wheel with blue stitching, not red.
I was thinking about it but the interior already has a lot of blue so it would be al little overkill😅
👍🙋👊
First 💪
Haha awesome you win!