JTS Customs
JTS Customs
  • 55
  • 366 663
BUILDING A DREAM GARAGE PART 2 FOUNDATION
Welcome to part 2 of building my dream garage. In this episode we continue the build and finish the foundation. After everything was dry we could finally put some cars on the concrete slab and see how this epic garage is taking shape!
I hope you like this content and make sure to subscribe to follow the building journey.
Check out the previous video:
ua-cam.com/video/zXZGZvcL5Ok/v-deo.html&ab_channel=JTSCustoms
Follow us on:
- FACEBOOK - / JTScustomsNL/
- INSTAGRAM - / joey_jts_customs
- WEBSITE - jtscustoms.nl/
Building timelapse
Workshop build
Construction
Gar guys dream workshop
Переглядів: 327

Відео

BUILDING MY DREAM GARAGE AT HOME | PART 1 DEMOLITION TIMELAPSE
Переглядів 1773 місяці тому
Welcome to a different kind of episode. This time we do not work on any cars but start the construction of my dream garage! Part 1 mainly consists of breaking down the old buildings and prepare the site to start building. I hope you like this content and make sure to subscribe to follow the building journey. Check out the previous video: Follow us on: - FACEBOOK - JTScustomsNL/ - I...
SECRETLY MODIFIYING MY WIFE'S VOLKSWAGEN UP!
Переглядів 1,2 тис.3 місяці тому
Welcome to a new episode and a new way to keep myself busy. This time I wanted to start working on the Porsche Cayman but sadly my wife's car needed some love. And boy did we gave it some love. We installed a cold air intake together with a custom valved exhaust. It sounds amazing and even pops and bangs on the downshift! I convinced my wife to do more to the volkswagen Up, so stay tuned! Enjoy...
BUILDING A FIAT COUPE IN 30 MINUTES | Full Build Series
Переглядів 9 тис.5 місяців тому
Welcome to the complete build series of my Fiat Coupe 16V Turbo. This is 5 years and many hours compressed into 30 minutes. So if you want to see the full build but don't like me talking :P then this is the video for you. All the details to parts that I used are in the seperate videos on my channel. But if you are curious just ask! This is the car that started the channel and one of the highlig...
Fiat Coupe 16V TURBO Restoration | On the Road Again!
Переглядів 1,3 тис.7 місяців тому
Welcome to what could be the final episode on this restoration series. A year of hard work finally pays of as we take the car on a road trip and drive on the track (Circuit Zandvoort). We also attend the event VIVA ITALIA, which you may have seen in the previous Aftermovie. A special thanks goes out to all my subscribers and viewers who made this possible. Some off you reached out to me and poi...
Viva Italia Zandvoort 2024 Aftermovie JTS Customs | Fiat Coupe Nederland
Переглядів 7077 місяців тому
The 2024 Aftermovie of Viva Italia at circuit Zandvoort with the Coupe Fiat Nederland Club! So much fun to be back with my car on this event! stay tuned for the full video of the whole weekend and a driving car. if you don't want to miss future upgrades, make sure to subscribe and turn on your notifications! Check out the previous video: ua-cam.com/video/noP5OThrKx8/v-deo.html&ab_channel=JTSCus...
Fiat Coupe 16V TURBO Restoration | Will it Start and Run? Part 5
Переглядів 9687 місяців тому
Welcome to hopefully the final episode of this restoration series... In the last episode we re installed the engine. In this episode we see if I have done everything right or terrible wrong. On top of that I also installed a big front mount intercooler on the Fiat Coupe. Before I can even do that, I first have to teach myself how to TIG weld aluminium. So much fun! If you want to weld like a pr...
TIG Welding a Custom Exhaust as a Beginner
Переглядів 4208 місяців тому
Welcome to a new episode where we learn a new skill! Something I have always wanted to learn is welding and specially TIG welding. In this video I take you along as I learn to TIG weld and make a custom exhaust for the Fiat Coupe 1.8 16V. I have about 2 weeks of experience and watched a lot of youtube videos. The best channel to learn TIG welding is: Weld Coach - youtube.com/@WeldCoachOfficial?...
Porsche Cayman 981 Brake Performance Upgrade
Переглядів 1,9 тис.9 місяців тому
Welcome to a new video of the Porsche Cayman 981. It has been a while since we worked on the Porsche but we are finally back at it. In this episode we upgrade the brake performance of the car by installing new pads and discs and also install stainless steel brake lines from Goodridge. On top of that we also painted the calipers and flushed the brake fluid for some fresh fluid! Parts used: Brake...
How To Install a Oil Catch Can & Oil Cooler
Переглядів 44910 місяців тому
Welcome back to a new episode of the Fiat Coupe 16VT restoration. This time I install an Oil Catch Can and a Oil Cooler. But not only that we also change the color of the valve cover and go a bit more for a stealth look. Products I used in this episode: - Oil Catch Can: www.qspproducts.nl/nl/qtank-34s/qtank34s_qsp-aluminium-olie-catchtank-1liter-d10-aansluiting - Oil Cooler: www.qspproducts.nl/...
MY FIRST GIVEAWAY!
Переглядів 37211 місяців тому
Welcome to the end of 2023! It has been an amazing year with a lot of hard work. And some great succeses! The channel has really grown so hard and I could not thank you all enough! But I can! With my first giveaway! So how do you enter? 1. Subscribe to my youtube channel 2. Leave a comment with "I want to win this" 3. Follow me on Instagram. I will be announcing the winner on Instagram on 1.1.2...
Fiat Coupe 16V TURBO Restoration | Installing A BC Racing Suspension set! PART 4
Переглядів 1,7 тис.Рік тому
Welcome back to part 4 of the fiat coupe 16v turbo restoration. We continue to find more broken parts and come across a nasty patch of rust. Together with the help of my brothers we fix the rust, repaint the car and upgrade the engine! We also reinstall the engine... but not without dropping it offcourse.. And as a last suprise, we install BC Racing coilovers on the fiat coupe. Products used in...
How To Remove Balance Shafts | FIAT COUPE, LANCIA DELTA
Переглядів 1,3 тис.Рік тому
Welcome to a new series of How to videos. In this episode I try to explain how to remove the balance shafts on my engine. This engine is shared with multiple cars like the Lancia Delta and Kappa aswell as the Alfa Romeo 155 q4. The kit I use is from PROJOE. End caps: projoe.nl/product/lancia-delta-integrale-balance-shaft-oil-blocking-kit-outside/ Wide Idle bearing: projoe.nl/product/lancia-delt...
Fiat Coupe 16V TURBO Restoration | Engine Rebuild PART 3
Переглядів 1,8 тис.Рік тому
Welcome to part 3 of the Fiat Coupe 16V Turbo restoration. In this episode we continue the engine overhaul and remove the balance shaft belt. We also electroplate the bolts and nuts to give the engine a nice new look. if you don't want to miss future upgrades, make sure to subscribe and turn on your notifications! Check out the previous video: ua-cam.com/video/DBhmFNPK9IA/v-deo.html&ab_channel=...
Fiat Coupe 16V TURBO Restoration | Engine Rebuild PART 2
Переглядів 2,9 тис.Рік тому
Welcome to the 40th episode of JTS Customs. In this episode we pull the engine out of the Fiat coupe en restore everything thats ugly and rusted. We leave no stone unturned and take apart everything like the gearbox, turbo and the entire coolant system. We also install a Lancia Kappa air intake manifold, this is almost a plug and play solution. So check it out! f you dont want to miss future up...
Fixing Everything Wrong With My Fiat Coupe 16V TURBO PART 1
Переглядів 3,1 тис.Рік тому
Fixing Everything Wrong With My Fiat Coupe 16V TURBO PART 1
Installing a Techart Spoiler on a Porsche Cayman 981
Переглядів 8 тис.Рік тому
Installing a Techart Spoiler on a Porsche Cayman 981
I BOUGHT THE CHEAPEST PORSCHE CAYMAN 981 IN THE COUNTRY
Переглядів 1,1 тис.Рік тому
I BOUGHT THE CHEAPEST PORSCHE CAYMAN 981 IN THE COUNTRY
BUILDING A AUDI A5 (TO RS5) IN 10 MINUTES
Переглядів 57 тис.Рік тому
BUILDING A AUDI A5 (TO RS5) IN 10 MINUTES
Goodbye Audi! "One Last Ride" Audi A5 2.0 TFSI
Переглядів 7582 роки тому
Goodbye Audi! "One Last Ride" Audi A5 2.0 TFSI
ENGINE REBUILD! Fiat Coupe 1.8 16V [PART 2]
Переглядів 4,1 тис.2 роки тому
ENGINE REBUILD! Fiat Coupe 1.8 16V [PART 2]
ENGINE REBUILD! Fiat Coupe 1.8 16V [PART 1]
Переглядів 4,2 тис.2 роки тому
ENGINE REBUILD! Fiat Coupe 1.8 16V [PART 1]
FIAT COUPE DIGITAL DASHBOARD (BARNACLE WIDGET)
Переглядів 3,6 тис.2 роки тому
FIAT COUPE DIGITAL DASHBOARD (BARNACLE WIDGET)
Viva Italia 2022 Fiat Coupe Club
Переглядів 8 тис.2 роки тому
Viva Italia 2022 Fiat Coupe Club
WE BOUGHT A NEW CAR AND SAID GOODBYE TO THE OTHER
Переглядів 8952 роки тому
WE BOUGHT A NEW CAR AND SAID GOODBYE TO THE OTHER
Fiat Coupe 16V Turbo Interior Upgrade
Переглядів 11 тис.2 роки тому
Fiat Coupe 16V Turbo Interior Upgrade
How To Replace Brake Discs and Brake Pads
Переглядів 9272 роки тому
How To Replace Brake Discs and Brake Pads
Retrofitting Drive Select to my Audi A5
Переглядів 11 тис.3 роки тому
Retrofitting Drive Select to my Audi A5
How To Paint Your Brake Calipers!
Переглядів 4,7 тис.3 роки тому
How To Paint Your Brake Calipers!
Audi A5 CUSTOM EXHAUST! | Audi A5 B8 2.0 TFSI
Переглядів 15 тис.3 роки тому
Audi A5 CUSTOM EXHAUST! | Audi A5 B8 2.0 TFSI

КОМЕНТАРІ

  • @titinegruta9532
    @titinegruta9532 День тому

    Succes în tote proectele

  • @shelbygtsoo
    @shelbygtsoo 11 днів тому

    The best and most pleasurable car I ever owned was the Coupe Turbo Plus in Ink Black. Every part of the car is piece of art and as Car magazine once wrote “Every decade a car manufacturer goes mad and offer so much for so less.” That was exactly my feeling every time I press the aluminium starter bottom and no matter what state I would be in it just get forgotten and a big grin is on my face ❤❤❤❤

  • @moasm_M.E.E
    @moasm_M.E.E 17 днів тому

    Where did you buy your seats from??

    • @jtscustomsNL
      @jtscustomsNL 17 днів тому

      @@moasm_M.E.E I bought them used from someone in the country

  • @danishairsoftentertainment2021

    I have the same engine as you, my camshaft is broken and need a new one put in and a new timing belt do you know how much the timing belt needs to be tightened and how much my camshaft bolts need to be tightened

    • @jtscustomsNL
      @jtscustomsNL 22 дні тому

      @@danishairsoftentertainment2021 the belt should be tight enough so that you can twist it a little. Dont overtighten it😅 best to have someone with you who done it a couple of times. As for the camshaft bolts, I would have to look that up

    • @danishairsoftentertainment2021
      @danishairsoftentertainment2021 22 дні тому

      @ Many thanks for the feedback, and yes you are welcome to report back on the camshaft bolts, another question is can you just remove the balance belt and that's it?

  • @phoeij
    @phoeij 25 днів тому

    Heel erg vet!

  • @twillems2285
    @twillems2285 Місяць тому

    fun fact! the ea211 engine series (1.0l to 1.6l vw group engines) has the camshafts integrated into the valve cover. The cams cannot be removed from this cover.

    • @jtscustomsNL
      @jtscustomsNL Місяць тому

      I hate the design hahahaha😂

  • @fabssgarage
    @fabssgarage Місяць тому

    Lovely job mate!! I will need to use the VFD refurbishing instructions you gave us. It's great to see the same era radio on the car! ❤

  • @Gbrl2047
    @Gbrl2047 Місяць тому

    Do you by chance know if these S5 seats will fit in Q5 or SQ5 B8.5?

    • @jtscustomsNL
      @jtscustomsNL Місяць тому

      I sadly dont know, maybe someone out there knows. Otherwise try to find some dimensions. Would be a sick upgrade

  • @riccardomarino4777
    @riccardomarino4777 Місяць тому

    Hi, thanks for the great video. Sorry at 1:40 you say ïf you want more info on where to place the cables, just ask".. so... please, can i ask you how to properly connect them? Today i planned to do this retrofit, just received buttons and cables. Thanks a lot.

    • @jtscustomsNL
      @jtscustomsNL Місяць тому

      @@riccardomarino4777 where did you buy the kit from?

    • @riccardomarino4777
      @riccardomarino4777 Місяць тому

      I have replied Two Times but I don’t know why my comment is not Here. Sorry, i am just mounting it, please can you say to me where to exactly put the violet LINBUS cable? I can’t figure out where to put it, please

    • @jtscustomsNL
      @jtscustomsNL Місяць тому

      @@riccardomarino4777 can you send me some pictures via instagram?

  • @SOCAL_SHORTS_FACTORY
    @SOCAL_SHORTS_FACTORY Місяць тому

    8:56 hey man, nice video. Question, how did you insert the metal clip back into the caliper? I took mine out and it seems impossible to get it back in the caliper. Did you have to use a special tool? Any help would be appreciated.

    • @jtscustomsNL
      @jtscustomsNL Місяць тому

      Hey man, I tapped it back in with a small hammer, after that you need to press in de pads. The important part is to allign it right

  • @magdragster
    @magdragster Місяць тому

    Great work, nice car :-)

  • @calistogonsalves4352
    @calistogonsalves4352 Місяць тому

    What cod to use meaning how to cod it

    • @jtscustomsNL
      @jtscustomsNL Місяць тому

      You will need VAGcom/VCDS to programm it

  • @stevenstrempel
    @stevenstrempel Місяць тому

    Doorzettingsvermogen is aanwezig, wat een werk haha

    • @jtscustomsNL
      @jtscustomsNL Місяць тому

      @@stevenstrempel absoluut! We stoppen pas als het klaar is😂

  • @tsikia7138
    @tsikia7138 Місяць тому

    Hello I would like to know where you found the rear lights? THANKS

    • @jtscustomsNL
      @jtscustomsNL Місяць тому

      @@tsikia7138 they are from Hella and can be bought on ebay or coupeteile.de

  • @ernstgrindheim587
    @ernstgrindheim587 2 місяці тому

    Burros

  • @ricardocosta5669
    @ricardocosta5669 2 місяці тому

    bom dia como anulou os farois para nao dar erro

    • @jtscustomsNL
      @jtscustomsNL 10 днів тому

      The bumper kit came with a fog lights cancel kit. I believe these are quiet commen to find on google

  • @ricardocosta5669
    @ricardocosta5669 2 місяці тому

    bom dia como anulou os faris para nao dar erro

  • @stefansoskic4674
    @stefansoskic4674 2 місяці тому

    what is the width of the pipe?

    • @jtscustomsNL
      @jtscustomsNL 2 місяці тому

      @@stefansoskic4674 40mm

    • @stefansoskic4674
      @stefansoskic4674 2 місяці тому

      @@jtscustomsNL And what is the width at the intake?

    • @jtscustomsNL
      @jtscustomsNL 2 місяці тому

      @@stefansoskic4674 If I remember correctly it was 51mm to 76mm adapter

    • @stefansoskic4674
      @stefansoskic4674 2 місяці тому

      @@jtscustomsNL Thank you very much

  • @donnydorito
    @donnydorito 2 місяці тому

    Why no joints? Or will you be saw cutting them later?

    • @jtscustomsNL
      @jtscustomsNL 2 місяці тому

      @@donnydorito there will be no joints, never saw them here anywhere..

  • @lisab3396
    @lisab3396 2 місяці тому

    Looking good 👍👍 Looks like overkill and costly. Anyway, if these was me doing a major job like that, I would give consideration to having a slope of minimum 2 degree's to a max slope of 4 degree's from the rear leading towards the front. Therefor, allowing for any water during a rain or storm penetrating under and around the door. I trust also that interlocking stone is also set to shed water away to the street???

    • @jtscustomsNL
      @jtscustomsNL 2 місяці тому

      Thanks! well this was a requirement for building in our town, I agree it looks like overkill haha. however it will need to be strong enough to put a lift on it with 2 cars. The drive way has a pretty aggressive slope and the slab is much higher than the street level. In the next episode we will also tackle the water part :)

  • @riccardomarino4777
    @riccardomarino4777 2 місяці тому

    Hi, thanks for the great video. You mentioned the “kit”. Can you hint me please where to buy it? Can’t find anything trusty online, found one only “Audi multimedia” mask containing right placed ADS buttons, without any sort of plugs and wires. Do you think it could work? does it change anything if the ADS buttons are on the right or left?

    • @jtscustomsNL
      @jtscustomsNL 2 місяці тому

      @@riccardomarino4777 heyy, i am not sure! I got mine from KufaTec. Maybe you can get the right kit there

  • @arnietwo11
    @arnietwo11 2 місяці тому

    Well done, very professional!! Must be some structure u r building with foundations to that level? You laid a pretty thick floor so not sure why the need for those trenches ? Still expensive but it will be galf price doing it yourself😊

    • @jtscustomsNL
      @jtscustomsNL 2 місяці тому

      @@arnietwo11 when its done you will see why it needs the strenght!! Thanks for watching🥰

  • @carlosbello4281
    @carlosbello4281 2 місяці тому

    Viene con las tuberias y conexiones?

    • @jtscustomsNL
      @jtscustomsNL 2 місяці тому

      @@carlosbello4281 i bought everything from QSP

  • @MrProvinspoul
    @MrProvinspoul 2 місяці тому

    You change a thermostat because it's new and nice, I can promise you that I don't do it here in DK, the thermostat can't be found anywhere for my 2.0 16V without turbo, the only one I can find is one on ebay for 500 EUR and it's not going to happen, is there a chance you know a place where I can buy one for human money.

    • @jtscustomsNL
      @jtscustomsNL 2 місяці тому

      They are hard to find and I found mine as Old New Stock here from a private seller. So sadly enough I cannot point you to a new one.

  • @streetracerssweden4834
    @streetracerssweden4834 2 місяці тому

    Horsepower ?

    • @jtscustomsNL
      @jtscustomsNL 2 місяці тому

      @@streetracerssweden4834 200hp

  • @modygames855
    @modygames855 2 місяці тому

    Rear bumper from oem rs5? Rs5 look?

    • @jtscustomsNL
      @jtscustomsNL 2 місяці тому

      @@modygames855 no its not an OEM bumper as they dont fit on the A5. You will need an aftermarket bumper

    • @modygames855
      @modygames855 22 дні тому

      ​@@jtscustomsNL thanks you!

  • @marks926
    @marks926 2 місяці тому

    So is every car optioned with the drive select and you just have to activate it?

    • @jtscustomsNL
      @jtscustomsNL 2 місяці тому

      @@marks926 its in the software yes, the buttons are not always installed and for dynamic mode there are also different suspensions to work with it.

  • @hobizoli
    @hobizoli 2 місяці тому

    rebuild it to 2.0 litre 😜😜😜

    • @jtscustomsNL
      @jtscustomsNL 2 місяці тому

      @@hobizoli might as well trow in a 3.2 v6 busso 😂

  • @THOMAS-sf6ny
    @THOMAS-sf6ny 3 місяці тому

    Kleine frage past der originale heck vom rs5 auch auf dem.audi a5 ?

    • @jtscustomsNL
      @jtscustomsNL 3 місяці тому

      @@THOMAS-sf6ny nein leider nicht, der RS5 ist nämlich hinten breiter als der A5

    • @THOMAS-sf6ny
      @THOMAS-sf6ny 3 місяці тому

      Also muss auf jeden fall ein nachbau dran

    • @jtscustomsNL
      @jtscustomsNL 3 місяці тому

      @@THOMAS-sf6ny ja genau!

    • @THOMAS-sf6ny
      @THOMAS-sf6ny 3 місяці тому

      Super vielen dank 👍

  • @seanmoore4653
    @seanmoore4653 3 місяці тому

    How to ruin a perfectly nice A5. Its like the crap teenagers do with their first car. Ruined. Thumbs down.. shite

  • @CharlesMasone-gz8bm
    @CharlesMasone-gz8bm 3 місяці тому

    That was one expensive upbadging, still not a RS5, not even an S5.

    • @jtscustomsNL
      @jtscustomsNL 3 місяці тому

      @@CharlesMasone-gz8bm but a lot of fun 🤭 thank you for watching the video!

  • @DIDIRust
    @DIDIRust 3 місяці тому

    Dookie brown interior is the only downside

  • @golfmk216D
    @golfmk216D 3 місяці тому

    That looking good and sound awesome, but what about that "free" hose on the engine that was on the original intake? Shoudn't be connected?

    • @jtscustomsNL
      @jtscustomsNL 3 місяці тому

      @@golfmk216D well to make it really nice yes, and I will do that. But it is not that important

  • @Axel-xt3cx
    @Axel-xt3cx 3 місяці тому

    Nice video! I am selling my Citigo for a Passat. I hope its a good decision... need some more comfort and space. I love the Up's,Citigo's & Mii's! I chiptuned mine from 60hp to 84 hp😂 Also do all the servicing my self, super cheap and simple car, its a real VolksWagen aka People's Car😊 Groetjes, Axel

    • @jtscustomsNL
      @jtscustomsNL 3 місяці тому

      @@Axel-xt3cx really awesome! We plan on chiptuning the Up as well. Hope it makes some difference!😂😂

    • @Axel-xt3cx
      @Axel-xt3cx 3 місяці тому

      @jtscustomsNL if you got the 60 hp eco version, definitely! There are 2 versions, the other one is 75hp, only software is the difference, so if you have the 60hp version you gain 24 hp!! It's crazy😂

    • @jtscustomsNL
      @jtscustomsNL 3 місяці тому

      @@Axel-xt3cx this is the 60hp version! So thats gonna be amazing

  • @andrewmccann1887
    @andrewmccann1887 4 місяці тому

    Now I want an up! 😂

    • @jtscustomsNL
      @jtscustomsNL 4 місяці тому

      @@andrewmccann1887 yesss do it!! They are amazing little go karts

  • @johnd.7178
    @johnd.7178 4 місяці тому

    i thought you would decrease the weight of the car by removing the big factory exhaust but instead you added more weight to it xD

    • @jtscustomsNL
      @jtscustomsNL 4 місяці тому

      @@johnd.7178 haha sorry!😂😂 maybe I should eat less to compensate😝

    • @thedandy6765
      @thedandy6765 3 місяці тому

      @@jtscustomsNL you could put a smaller cat in the middle losing weight and the stock exhaust would sound a bit better even then have the valve for fun mode

  • @stevenstrempel
    @stevenstrempel 4 місяці тому

    Next service: turbo that thing 😎

    • @jtscustomsNL
      @jtscustomsNL 4 місяці тому

      @@stevenstrempel jaaaa😏

    • @stevenstrempel
      @stevenstrempel 4 місяці тому

      @@jtscustomsNL misschien past een CBR1000 blok ook wel voorin

    • @jtscustomsNL
      @jtscustomsNL 4 місяці тому

      @@stevenstrempel die gaat er in als het blok is ontploft door de turbo😂

    • @stevenstrempel
      @stevenstrempel 4 місяці тому

      @@jtscustomsNL Goed plan 😎

  • @MorrisHGT
    @MorrisHGT 4 місяці тому

    Vraagje over die luchtfilter. Die 90 graden bocht is die 55mm naar 76mm zo zelf samen gesteld of zo voor die type auto besteld

    • @jtscustomsNL
      @jtscustomsNL 4 місяці тому

      @@MorrisHGT deze heb ik zo kant en klaar gekocht bij chargertech. Zijn in veel verschillende maten te krijgen

    • @MorrisHGT
      @MorrisHGT 4 місяці тому

      @@jtscustomsNL ik zal eens kijken. In de fiat app groep is er geen kant en klare filter voor de seicento mpi inlaat diameter is 55mm spi versie is die 75mm en daar is wel iets voor. Dacht als die inlaat diameter nou ook 55mm is dan zou die ook gewoon moeten passen

  • @Den7711
    @Den7711 4 місяці тому

    I'm on my 5th 20v and it's definitely a special car.

    • @jtscustomsNL
      @jtscustomsNL 3 місяці тому

      My first one was a 20V! really loved the sound. If I every buy another one it must be a 20V (Turbo)

  • @gabitzu88oky1
    @gabitzu88oky1 4 місяці тому

    Hi ..can you tell me pls how fitting the wires to the spark plugs ??

    • @jtscustomsNL
      @jtscustomsNL 4 місяці тому

      @@gabitzu88oky1 send me a message on instagram and I will send you a picture

  • @enzograsso6049
    @enzograsso6049 4 місяці тому

    Grande lavoro!!

  • @Gubsies
    @Gubsies 4 місяці тому

    Kan je de armleuning achter ook los vervangen als die stuk is? Moet heel de achterbank er dan uit?

    • @jtscustomsNL
      @jtscustomsNL 4 місяці тому

      @@Gubsies ik vrees dat je daarvoor de achterbank er wel uit moet halen. Die zit er namelijk vast in

    • @Gubsies
      @Gubsies 4 місяці тому

      @@jtscustomsNL ah ok. Daarna is het wel mogelijk. Het is een los onderdeel? Thanks!

  • @DeinosAres
    @DeinosAres 4 місяці тому

    Can I send you my A5 and you can do this for me? no joke.

    • @jtscustomsNL
      @jtscustomsNL 4 місяці тому

      @@DeinosAres epic question😅 sadly I dont have the time for that.

    • @DeinosAres
      @DeinosAres 4 місяці тому

      @@jtscustomsNL sad day hahah

  • @njfr9389
    @njfr9389 4 місяці тому

    loved it ! i have a 3L sportback quatro A5 would love to know the exhaust parts so i can buy to replace my 2 pipes

    • @jtscustomsNL
      @jtscustomsNL 4 місяці тому

      @@njfr9389 thanks! There is a dedicated video of the exhaust with links to the parts!

  • @Viscosity-cb3xl
    @Viscosity-cb3xl 4 місяці тому

    Brilliant cars. The Fiat 16 valve turbo engine is the same Lampredi engine as the legendary Lancia Delta Integrale

  • @it.couldbe
    @it.couldbe 4 місяці тому

    Is this rear wing actually from 718(982) cayman gt4?

    • @jtscustomsNL
      @jtscustomsNL 4 місяці тому

      @@it.couldbe no this is the TechArt wing for the 981, the GT4 wing looks different and is mounted different

  • @it.couldbe
    @it.couldbe 4 місяці тому

    is this rear wing actually from 718(982) cayman gt4?

    • @jtscustomsNL
      @jtscustomsNL 4 місяці тому

      Hello, no this one is for the 981, its the TechArt spoiler type 2. This one is also available for the 718. The GT4 wing looks different.

  • @shelbygtsoo
    @shelbygtsoo 4 місяці тому

    I kept my turbo plus all original and never regret selling any car like my coupe 😢the gentleman who bought her mod it to 380hp on the wheel!!!

    • @jtscustomsNL
      @jtscustomsNL 4 місяці тому

      @@shelbygtsoo sometimes I also think about building it back to original 😅 but I think i am to far gone…

  • @raftyy__
    @raftyy__ 5 місяців тому

    what type of socket do you need for the seats??

    • @jtscustomsNL
      @jtscustomsNL 5 місяців тому

      @@raftyy__ I sadly dont remember but I think it was a star pattern socket. VAG cars often use them

  • @Prexionesonora
    @Prexionesonora 5 місяців тому

    Hi, are the wheels you installed Cesam 17"?

    • @jtscustomsNL
      @jtscustomsNL 5 місяців тому

      No they are wolfrace triad 17”