Friday Funhouse: 2022 WRX Brembos / AOS / Wicked Big Meet Prep
Вставка
- Опубліковано 9 чер 2022
- Friday Funhouse: 2022 WRX VA-Style Brembos / AOS / Wicked Big Meet Prep
Friday, June 3 8:40 AM. 22 hours until takeoff for @wickedbigmeet -
JJ: “Do we have the AOS on the 22 yet? How is the Brembo install coming?”
Us: “Well… We ran into a few snags and aren’t sure that we’re going to have them installed before we leave for the show.”
JJ: “This car will be done and ready by 7AM tomorrow morning. Hold my beer fam. Let’s party MF’ers.” (ok we made that last part up).
Follow along and check out the link in our bio for the insane last minute WBM prep and the first reveal of our prototype IAG Air/Oil Separator (AOS) and VA 2015 STI Brembo Brake Kit are now officially installed and in testing. Check it out! - Авто та транспорт
Slowly but surely you guys are giving the fans the 2022 STI Subaru refused to. Thanks, IAG.
They should try putting the 2018+ STI Recaros seats in, or at least order the 2022 WRX GT Recaros from Subaru.
One down ... whole line up of 2022 models next !!!!
@@ttis3701 Whoever made the decision of offering the Recaros only in the CVT model should be fired.
Aside from the wing that doesn’t fit and bumper it looks great!
Wouldn’t people saved a little more money by just building their own sti?
You guys and Aeroflow Dynamics have the best looking 22 WRX. Really excited to see all the future mods for this.
Totally agree. Do you know who's personal build this is?
@@bkhavityoway23 Unfortunately don't know who's personal build. Might just be IAG's Shop 22 WRX
Current owner of a 20' STi and when the 22' WRX was announced i was hating on it hard... just like everyone else, but seeing all the time and work everyone at IAG has been putting into this WRX. Damn does it look gooood!!
Same
Guys ! I installed a set of 2017 STi Brembo on my 2023 VB WRX ! In the back we did exactly the same. However for the fronts, Paragon brakes do sell a 2-piece rotor that is made for VB knuckles and STi 4pots Calipers ! the hat is considerably thinner, getting the desired rotor offset without using spacers !
It is more expensive, but a good quality rotor spacer not being readily available on the market and the mendatory wheel studs replacement made me order the 2-piece rotors for sake of simplicity ! and looks !!
keep it up and hopefuly see you at the 2023 wicked big meet !! Look for a Black VB with orange brembos coming from Canada :D haha
That 2022 WRX is going to be tight when you guys finish...good stuff!!
I’ve always held the notion that having the fender flares be body color and lowering the car a bit will absolutely fix the aesthetic issues of the new one. I’m glad to see somebody do it and it looks even better than I have imagined.
Thanks!
Since driving it - my issue is that I feel like I was sitting on-top of the car instead of in the car - the seating position was super high up. I drove it back to back with the BRZ and I have to say that although the BRZ has less power and smaller - it was damn fun to drive.
wish you guys would sell a whole kit
It's was awesome meeting you at wicked big meet 22. Love the car it was awesome. Can't wait too see more update that you do on the 22 wrx.
Thanks for coming
Making Videos while under a time crunch. Thanks IAG for the content! Have fun at the WBM 2022!
You guys are freaking awesome and your right down the street from me in Westminster car is coming together I’m liking this body style more and more as you guys build onto it keep up the great work!!!
Right on! Thanks for the support!
Ian is the MVP with those wheel spacers on the fly!
I am excited just had the fenders paint matched and waiting for the STI wing!!!
Very interesting, grimspeed said the STI Brembos didn't match up to the hubs/knuckle so they ended up doing the Cadillac Brembo + bracket mod instead. Ha, maybe they didn't actually try putting on the STI brembos lol
Maybe the 6pot ones don’t fit but the older 4pot ones do
@@GARAGE-xb4be Another YT garage Actually put the OEM 4 pot STI brembos on and they mounted up perfectly. The caliper mounts are the exact same on the Kunkle on this gen as the previous gens. So if the OEM 4 pots can mount up, so should the 6 pots, in theory lol.
I wonder if you also need to swap out hubs to get the rotor alignment right
@@GARAGE-xb4be the rotor alignment was off center by a few mm in the front, rears were spot on. So the other garage machined a 2mm spacer to sit on the inside of the rotor hat for the front and the fitment was perfect and everything else bolted right up.
Absolutely awesome!!
Just bought my wrx gt yesterday. I can’t wait to start working on it.
Any chance you guys would sell those rotor spacers. I have a set of brembos and a 2022 coming in soon. Lol
I had the IAG street AOS installed in my 2019 STi. Looks great in red.
I'm ready for the AOS kit to come out! I need it
Looks amazing!! I'm getting one in September can't wait. Only thing is that I wish that the duckbill on the trunk could have been removed kinda looks odd with both the wing and the duckbill but overall the car looks beautiful!
Man you guys are super talented.
Another little tidbit is that if you get the 15-17 STI rear brake shields it will be a nice OEM setup. No hacking or cutting the bolt right up as if they were OEM
Looking good! Maybe I missed it in the video, but what was the thickness you ended up with on the spacer up front?
Beautiful Car!!! Wish they would make the STI version like this!!!
I imagine the 6 pot brembos from the 2016 sti onwards will bolt in the same? - nonetheless GREAT video!!! thank you so much!! - how thick are the spacers?
This is hype. I own a 2023 WRX. The brakes are just fine. 😅
Great work! I enjoyed the video.
Glad you enjoyed it!
Honestly, the stock 2022 WRX (regardless of trim level) genuinely needs better brakes if you're going to track it.
This car is already worth more than 50k$!! What a beauty!
I love it,i wish i had a place like you guy by me
At unveil I wasn't sure about the 22 design, man this one sure does look nice though 🔥🔥🔥
Will there be a kit you guys will offer to install same brake kit? If not how can the public get ahold of the same set up?
Beautiful just beautiful looks like a newer version of my car
Such a beautiful car.
Love the fix for the brakes but looks like dba could do it as a option
What wheels are those? They look awesome.
Is a STI brake swap kit in development for the VB chassis from IAG?
You guys going to sell the spacers ? Planing on doing brembos and definitely going to need those spacers
could you guys whip up a bracket and spacer for the sk (2019+) forester? i heard the sti brembos bolt up, but if the new wrx needed work to fit, im preeeetty sure the forester is gonna need work also since they are on the same platform.
Were is your location?? Amazing work guys 😍😍😍
Would the spacers be something you guys would sell or do you think there will be some type of kit that will be released
To help with the rotor offset would sti wheel bearings/hubs work?
Best one yet l have seen
Thanks Peter!
I've been in love with the 22 since it debuted.
Should've put the 2020 yellow 6 pot brembos on her 🤌 still looks good though 🙌
Just curious if they’re going to sell the spacer for the front brembos
My Dreams 🙏🔥
Is there a way you can do a motor swap with the 2020/2021 STI? Drop it into a 22/23 WRX and put sti badging on it??
How think did the spacer ultimately need to be for proper rotor spacing?
The WRX that should have been. Actually kinda starting to like the car now. Just a shame it needs THAT much modification to make it appealing.
Why don't the seat headrests, at 11:57, have the WRX logo embroidered onto them? Every other 2022 WRX video I've seen of the interior seems to have the embroidered WRX in red.
I seen Grim Speed add Cadillac ATS Brombo to the front of ther 2022 WRX and the spacer they made for the Front was 12mm It's nice seeing all these different companies make and do upgrades for the new WRX and making it into a Sti which sadly we won't be getting from subi which is a big mistake in my opinion. Keep up the amazing work your doing
Thanks!
Thank you for clarifying the spacer thickness 😊
any impact for removing brake dust shield?
What STI calipers are those, and any difference in bracket?
What rotors were used exactly? I didn't see it mentioned or linked.
Soooo……….. when can I come by for you guys to install some STI breaks and the AOS on my 22?
Awesome video as always!!
Thanks for the support!
How sick? Where's the intake though?
How much would be the estimated cost for all the exterior parts and install?
Are we able to order these Brembo brakes? What type of wheels do you got on this?
How much would this cost? Considering doing something like this
The STI brembo upgrade is something I definitely want to do to mine.. Which years STI Brembos did you guys go with?
Those look like the same calipers on my 2015 STi. If so, then 2015-2017 STi would work.
Are they selling the spacer kit?
Bigger brakes...bigger master cylinder with solid ss lines...and master cylinder bracket would be a huge upgrade
Just purchased a '22 WRX in the graphite grey and absolutely luv it. It's a wonderful car and very exciting to see the aftermarket take it to another level. 12:20 is a perfect example of what this car can easily be with vision and $5k to 10K. Keep up the good work fellas.
Thanks for the support!
You all have made the 22 WRX look like an amazing car, It's such a shame how much work the average person would have to do to even make it look decent, Everything looks great, Only thing id do different is have the sides of the spoiler white with the top crossbar gloss black.
Can’t stand how much people hate this thing 🤦♂️ I love mine
Thanks for the feedback
@@pumpfortnite You're allowed to like it - and that's good to hear - but it is not great IMO (yes I have driven it).
@@MKu64 well if youve had a VA then you definitely know it’s an upgrade.
I am wandering if you guys are going to sell those brembo brakes? I would love to buy it and install it on my VB WRX!!!
How thick are these spacers and were can I get them?
What was the part number for the arp lengthened studs?
Looks like the part number for the hub is the same, I wonder if you could swap the whole STI knuckle over
Try already, can't ball joints different
i feel with everyone putting an sti wing on the new 2022+ wrx, it wont be a hated discussion
car is sick
Killin it. Was there any reason for choosing the 4-pot over the 6-pot? Or was it just what y’all had on hand?
I believe they mentioned in a previous video that they had that sti kit laying around.
Bingo!
Badasss 😎
So what I’m gathering here is that the biggest complication is the rotor. Do the factory rotors line up with the STI brembos (obviously the diameter would be off, but it would help gauge) curious if a larger factory rotor would work with the brembos without spacers ie, ascent/forester/outback rotors. Only concern with using the spacer behind the rotor is that the hub no longer stick out and doesn’t allow for the wheel to sit on it anymore. Maybe The final version of the spacer should have a longer lip to account for the difference to still provide a mounting surface for the rim. Good job overall guys!
Due to the diameter, you unfortunately won't be able to use it.
@@theiagchannel custom 2 pc rotors would work with spacers at from of rotor.
Now if I just had a CNC machine in my garage. 😂
Do you guys sell the spacer necessary for upgrading the front brakes to the STI calipers?
We do not unfortunately. But hit up our sales team for a possible solution!
this is amazing. where are you guys based? can i ship you guys my 2022 wrx and have something similar done?
Our body shop is located near Baltimore, Maryland
I'm really surprised you guys didn't go with the 18+ 6pot brembos instead of the 4pot brembos
This is what we had on hand at the moment
@@theiagchannel are you guys going to look into trying the 6pot brembo down the road as well?
When’s the aos kit going to be available for purchase for a 2022?
We have a bit to go with testing but we're hoping soon soon soon!
It looks like the championship white type R FL5
Question, do 18 inch wheels fit the base model or do you have to stick around with the 17 inch?
Every trim above the base model comes with 18s so you should have no problem.
18s will work, so will 19s
How thick of a spacer did you need under the front rotor I'm really wanting to do this and I have the machine equipment to do it I just need to know how thick of a spacer i need
Did you get the answer to your question? I am also looking for the answer. Just bougth a set of brembos.
So are these actual sti brakes, or the brembos off the 2020 wrx with the performance brake package?
We used STI brakes for this conversion.
🔥
The spoiler would look much better white and just the middle part black or white completely
Where’s you shop?
I like the stock look better.
um... I only want these guys modding and working on my wrx LOL! Wow!
Sweet Subaru Civic.
imo, that spoiler does not really integrate in the cars design. would suggest a larger one with more rectangular shapes
It looks fucking sick now, to bad Subaru didn't make it look like that from get go. Great job guys!
Thank you
Damn you guys are making me wanna trade in my STI for a WRX lol, love the work you've put in... keep up all the hard work 💪
Thanks!
Me too.
Do you know where that person got the paint matched fenders, bumpers and side skirts?
We painted these parts in house at our body shop.
Yusss
💯🔥🔥
Can you guys do a mod on Hyundai Elantra N? I believe Elantra N is faster, better value car than WRX anyways. Thank you
Yassssssssssss.
OMG yaaaaaassss
YAAAAAAAAAAAS
When’s the air/oil going to be up for sale
It has to go through lots and lots of testing!
why are you making it look like the sentra nismo....???
Fbo and tune plz
I still think that STI wing looks terrible on the 22 but other than that it's fine I suppose
That white makes me regret getting the dark gray!
Red and white on this generation look the best imho
Same, I do like how the MGM blends the cladding tho