NOT JUST SCV REPLACEMENT VIDEO - Also when & why plus Bonus COOLANT Flush info
Вставка
- Опубліковано 24 жов 2021
- Toyota Hilux suction control valve replacement when to replace the suction control valve Toyota 1KDFTV diesel fuel pressure problem
Diesel injector rattles
Fourby4diesel 
Engine coolant checking level
Bleeding the cooling system - Авто та транспорт
Great info 👍 👌 👍🤘😎🇦🇺
3:40 just in case it is useful information for you: I have a 2007 Hilux cab chassis manual transmission with steel tray and steel bull bar (and a tow bar!) and have averaged 8.0 lph over the last 60,000 km.
you should try some parabolic springs with a comfort ride nil extra loading rate 50mm lift and a good big bore set of shocks , you need good quality shocks because parabolics act like coil's until you load them up. standard Hilux rear spring packages are designed for a 1000kg load before you put a tray on, so they are over stiff when running around empty. just something to think about. parabolic springs will still carry weight when needed just ride a lot better when empty or just a few things in the back. if you need to later you can add some airbags if needed.
I’m already all over it
Ladies, start your engines. Beautiful. it works. SCV is a winner again
Not this time rare that a long SCV is going to fix anything but I thought I’d try it has been removed
Very good master
Should the butterfly move whilst truck is not started but key is on?
Hi, if the car stall while accelerating and revving over 3k what could be the main cause? The cel light lit but disappeared after engine restart. Car still runs okay if runs under 3k rpm. Any thoughts? Thanks 😊
更換柴油濾蕊
Just wanted to ask if you need to calibrate the tune after you change the SCV or is it just a matter of changing over the part? Thanks and great video.
That's what I am wondering , wether they had to do anything via a scan tool , like a relearn
Thanks guys, about to do this exact job, currently vehicle runs for around 2 seconds then stops and will not fire up till next day, then same again. Reckon it's an scv?
Problem solved after change scv?
I think my scv is finally giving up the ghost, my motor has an izusu engine with a denso fuel system and when its iding the engine will hick up every so often though its happen more frequently now and the rail pressure tripples in pressure at idle and engine starts knocking, if i dip the throttle the rail pressure goes back to normal and engine sounds normal, ive had the truck since new and has 300k miles on it now scv is still original and its a long one
thx i want to do mine
Will be great to hear the out come 👍🤞
No change I have removed it and put the original one back in
Hey Anthony, can you recommend any good mechanics over in Perth?
Greg Adams in Balcatta
@@ianhilton6015 can you be more specific?
I am near Balcatta
thank you!
Note fitting an wrong scv to a vehicle that isn't the right part will not start, the ecu will just reject it. So the person who said the engine blew up because of the incorrect scv fitted is just full of it.
Unless your car is stalling or has rough idle fitting an new scv will not lessen the acoustic rattle. It's just a waste of time and money.
About 80% of diesel rattle is caused by poor quality/low sulfar fuels, adding additives increases lubricity which in turn can reduce diesel/injector rattle.
NEVER FILL UP YOUR DIESEL WITHOUT ADDING FUEL ADDITIVES! 1 bad batch of fuel can Spell doom for your injectors, pump and ultimately the engine.
Compliments.. the 1KD FTV expert!
Where are you located please ?
Victoria you?