How To Install Chimney And Stove Pipe For A Wood Stove | First Step To Going Off Grid
Вставка
- Опубліковано 7 вер 2024
- We install our new wood burning stove and show you how to put all the pieces together. From the assembly of the stove pipe to the attic box installation and the chimney pipe. We talk about proper stove location and why adjustments need to be made.
Duravent DVL Basic Through Ceiling Kit: amzn.to/47aBCBl
Here are a couple of sites that are very helpful for calculating your stove and chimney pipe. www.northlineexpress.com/help-pipe-install-planning and woodstovepro.com/articles/understanding-the-10-foot-2-foot-3-foot-rule-how-to-determine-the-chimney-height-of-class-a-solid-fuel-pipe-above-the-roofline/
We hope y'all learn what you need to know from this wood stove installation as well as the chimney pipe and the stove pipe install. We are taking steps to move our home off grid and this is one of the first.
Pete B's channel: / @petebeasttexashomeste...
Pete B installing his chimney pipe: • Buck Stove model 91- D...
Tools We Own And Recommend For This Job:
Cutco Shears: amzn.to/36e9uz9
Loctite Polyeurethane Roofing Sealant: amzn.to/2BPSVeP
Dap Polyeurethane Roofing Sealnant: amzn.to/2MR6Mb4
Dewalt Impact Driver: amzn.to/2qMCFc8
Stanley Pry Bar: amzn.to/2MR57SS
Ryobi Reciprocating Saw: amzn.to/345PXyX
Plumb Bob
Measuring Tape
Sharpie
Caulk Gun
Drywall Saw: amzn.to/2q24Aok
Flathead Screwdriver
Hammer
Thanks for stopping by and don't forget to come see us on:
Our Site: countrylivinge...
Facebook: / countrylivingexperience
Pinterest: / pins
Instagram: / countrylivingexperience
Please support our family. Shop Amazon through this link: www.amazon.com...
I love it that you’re still wearing a Ron Paul shirt! (Former Ron Paul Delegate here🙋🏻♂️)
Thank you. I will never take it off…lol. I helped make the polling phone calls during the primary. What an amazing time. I am still Facebook friends with a couple delegates.
Indiana delegate 2012 here!
Ron Paul shirt in 2021- best indicator This guy has a superior level of Trustworthiness and unmatched moral consistency
man This made me subscribe based off the thumbnail before I even got to the video Real Patriot 👏👏👏👏
Was a Delegate from WV!
Absolutely fantastic - explaining the centering techniques you used was HUGE!
Glad it was helpful!
The second big collar is for the attic insulation shield and the smaller one is for the roof above the flashing. FYI
I didn't have enough clearance to install mine in the attic. He probably had the same issue.
Extra points for the Ron Paul shirt.
Awesome!
Thanks for all the information. It is a good overall - general info video to help the DIY people get a better idea of what we're getting into.
You’re welcome
Helpful video. I do believe the what you thought was a wider storm collar is actually supposed to be installed around the pipe just above the insulation shield to meet code and keep the insulation shield clear of debris and insulation.
Glad it was helpful!
Great video, thanks for taking the time to make it, I know it adds a lot of extra hassle to any job!
Thank you. I appreciate it.
Great job on the video. Thank you for taking the time, that was extremely helpful! God bless!
You're very welcome! God bless y'all as well.
THANK YOU from Canada, that God bless you.
You’re welcome
So descriptive and thorough. Just what I needed. Thanks for your time
Glad it was helpful!
@@CountryLivingExperience Very informative video. Out of curiosity, can you chimney pipe be to high? My pipe sits on the lower side of my house. So I have three 3’ foot pipes. Any info would be appreciated
@@joseochoa7043 9' of pipe should be ok but you will need a lot of bracing.
@@CountryLivingExperience Most definitely. Do you think being that high could cause a problem? I’ve been having a hard time starting/keeping the fire from dying today
@@joseochoa7043 It should have a better draw if it is that high. Remember the 3-2-10 rule. 3 feet minimum above the high side of the roof and 2 feet above anything within 10 feet.
Love the shirt! They banned him on Facebook... this censorship is scary and pathetic that RP got the ax.... I was all in the ron paul revolution 2008 and 2012 and he's still out there making sense ! Love the video too!
Thank you! I appreciate it. The country really lost out when they railroaded him at the convention in 2012. He was our best chance to turn around.
Peace. Prosperity. Personal freedom and individual rights. No wars!!! Such radical thinking RP. It's a good thing the war machine corporate controllers banned Ron Paul from putting such terrible ideas into the minds of Americans! It's sad, I'm sad that people think this censorship is totally fine. The pendulum will swing the other way eventually. This will ultimately lead to a totalitarian dictatorship style government. Some would say, myself included, were already well on our way
I totally agree.
Well done. Appreciate your verbal clarity and well though out explanations.
Much appreciated! Glad it was helpful.
This is the best duravent style tutorial on UA-cam great job Sir!
Thank you
11 thumbs up .... how many "T" are in across? LMAO
this has been the best vid ive seen for installing stove pipe. ty
last vid i watched, the guy used galvanize pipe mounted upside down. and no fire protection on his floor in an rv.
and ur vid nice cam wrk and ur understandable too. no annoying music is nice also..
Awesome. Thank you for the kind words and I am glad the video was helpful.
Excellent video. Getting ready to install a wood stove in my outbuilding using Rockford Chimney stove and chimney pipe and this one really helped visualize my installation. Shouldve known it was going to be a decent video when I saw the Ron Paul shirt👍
Thank you. I appreciate it and I am glad it was helpful.
Man....lol....you keep showing up I'm my searches. Keep up the good work.
Awesome! I must be doing something right!
Thank you so much for your help installing wood stove chimney.
You’re welcome
Hey I was looking up stove pipe installation videos and noticed your shirt said Ron Paul! I don’t care what you’re doing, I’ll subscribe! Lol
Awesome! Glad to have you here.
@@CountryLivingExperience me too! we'd be a lot better off with RP leading us through this BS today
I wont!
Thanks for the great video! I'm installing a homemade wood furnace that I fabricated out of an old propane tank. The furnace looks great, but I didn't know where to start with the chimney. Thanks for your help! My project was for my motorhome in which I live, but the information is still helpful and mostly applicable. I'm subscribing. 🙂
Glad I could help and welcome to the channel!
I love your icon!
@@ladynada3435 thank you! The picture reminds me of my old friend, Mooch. She was a great cat. ❤️
GOD 🙏🙏🙏🙏🙏 BLESS YOU AND YOUR FAMILY!!! YOU HAVE DONE 👍 OUTSTANDING JOB TEACHING ALL OF US PHENOMENAL 👍😎👌👌👍
The little dabs on the flashing is like what we do with a sucking chest wound. Leave the lowest side free on the chest to let blood and air out so we don’t cause a tension pneumothorax!
Exactly
The Ron Paul shirt sold me.
Awesome!
Great video buddy. I just installed mine today with your help. Only thing I'd add is wear nitrile gloves when sliding the flashing in. I was more liberal with the goop and lifted the flashing as much as possible as I set it into place rather than slide it. I made sure there was goop under the screw holes too; three along the bottom, two midway up
Thank you!
Great video with all the detail I needed. Thank you
Thanks Johnny. Glad it was helpful.
Great video, as usual. You made it look quite easy. Thanks for the information.
Thanks man! I appreciate it!
Thank you so much, I didn't know if I had to twist the end cap or what. But it just pop in to place.
You're welcome
Interesting channel, I'm subbing. We're looking for a homestead and we're half packed up but no place to go yet!! I found your channel when I was looking for a solution to my problem. We have a telescoping flu and I lifted it to see if there was any build up so I wouldn't have to get on my roof. Later we used a piece of fat wood to start a fire and we soon opening doors, turning on a fan and then I seen my flu was leaking smoke at the top. Now I know I must've untwisted the thing...! Take care, we'll be looking in..
Welcome to the channel. Hope you can find a homestead soon.
Good info for those who are able.
This is the second time you have made a comment like this. If you would like to contact me via our facebook page or email, I can hopefully put you in touch with some helpers from one of our local churches. Would that be helpful?
seen MANY videos.... like the comment below, a few VERY helpful tips-thanks bro !!!!!!!!!!!!!!!!!!!!
You're welcome. Glad it was helpful.
If I had a Ron Paul short I’d be rocking it until it was rags. Big fan
Awesome! I have a few of them still.
Thank you so much for this vid ! Glad I watched or I would have only gone half way down shingles but now I know better 😁
You're welcome
Thumbs up for the Ron Paul shirt
Awesome! Welcome to the channel.
Great video. I appreciate all the tips and links.
One suggestion, you might make an additional short video on installing a stove with a 90 degree angle going into a wall. I have been reading up on this design and have come across a number of regulations regarding 90 degree angles. I think it would be a compliment to this great, detailed, video.
Thank you. I am not sure what you are referring to with the 90. This is the only stove we will be putting in this house so I won't have an opportunity to make another video on the subject unless I move.
Yes please!!
In these cooties19 times, I'm wondering how to put a wood stove chimney into a modern home in a pinch... I've been really wanting to have back up heat (well, if I had it my way, it would be primary heat!)
I can grow food and hunt and we have small livestock and have multiple options for cooking, a creek for water, but heat in the winter?? That's the one that I'm really worried about.
Im thinking a wood stove on concrete floor of the walk out basement, just in case, vent through a window?
So many videos but not enough for complete noobs explaining the bare basics and mechanics so we understand what we are doing and why, so if it becomes a necessity, we know how to put something efficient and safe, on they fly....
If it was entirely up to me, I'd have a rocket mass heater down there with parlor stoves for boosters and "space heaters".
Ultimately I'd like to have an actual big momma cook stove oven, in my kitchen, (husband has a long way to go before that would ever happen) but in a SHTF situation, everything is fair game.
Anybody have suggestions?
You earned a subscriber with that shirt.
Welcome friend
t-shirt made me choose your video, cheers
Awesome!
Thank you 😊 I’ve bought a wood burner need to get the flu pipes now!
Glad I could help!
I see "Ron Paul" I click "Like"
Awesome!
LOVE your shirt
Thanks brother!
love the ron paul t-shirt
Awesome!
thanks for the info i watched it right to the last second ......which is rare on my part. lol i subscibed and liked. great informative video. keep up the great work. from fort simpson nwt canada .....
You're welcome. Glad we could keep your interest and offer good info.
you had me at the Ron Paul Tee.
Awesome! Welcome to the channel.
Same haha
Hey man! Nice job 👍
Gracias Amigo!
i like the Ron Paul shirt.. The Libertarian life is best. :)
Thanks. I like your Red Wings icon.
This is great video, with a lot of details explanation. I'm curious about what the inside of the attic looks like? Did you box in the pipe?
Thank you. Sorry the attic is so tight, it is hard to even crawl back to the point of install. The ceiling box that you saw installed is the only surround that is required. It sticks into the attic about 8 inches and holds the insulation back from touching the chimney pipe. Some people like to add taller sheet metal boxes but it is not necessary.
I love your shirt! Great video as well!!
Thank you! I appreciate it.
Love the T-shirt! 👍
Thanks! RevoLution
NICE T SHIRT!
Thank you
Nice shirt, boy do we need that guy
Thank you. We sure do.
Love your shirt brother. Helpful video, thank you
Appreciate it! Glad we could help.
Love the shirt
Hello,
Best tutorial the average Joe like myself could have asked for. We are getting the Drolet HT 3000 and can't wait to have it up and blazing!
I was quoted $5000 from the "professionals" to do it and I don't think this is as much of rocket science as they made it seem.
I find the hardest part is finding all the right parts and pieces as none of my local big box stores have a complete set of the same brand. That last piece you mentioned (double wall chimney adapter) which came in my Duravent Up the ceiling kit, do you happen to know if it would fit a non Duravent double wall black stovepipe? I was able to get Duravent Chimney pipes so that's good from ceiling support and up but I can only get my hands on either a Selkirt or Supervent black stovepipe and I'm not sure if they would fit a Duravent adapter.
I'm hoping the Duravent adapter is universal and would accept any brand but sometimes it pays off to double check everything in advance as I already know how finicky those products are.
Hope I didn't bore you out with my rant but any feedback would be greatly appreciated!
Thanks again for the wonderful content!
Glad it was helpful! I am not sure if that Duravent adapter will fit another brand. I would venture to say no. I had to buy all of my stuff online because no place sold stove pipe around here.
how did it turn out for you ? i just purchased the same stove and thinking about installing myself .
Great video very informative and well done
Thank you. Glad it was helpful.
Nice chimney video 🌝
Thank you
Ron Paul Forever!
For Liberty!
Anyone wearing a Ron Paul shirt gets a thumbs uo from me
Awesome! Welcome to the channel.
They are very picky in Canada about woodstoves. You have to have an inspector come to your house and check it out before you can get house insurance. All your pipes have to be double insulated. They do not want to insure you at all with woodstoves and charge more money for insurance. Unless you pay cash for your house you have to have insurance. They also check to see if you have working smoke detectors and carbon monoxide. We probably burn a lot more wood than you do because of the cold weather. We have been lighting fires since October and have 2 stoves. We also burn 12 cords a year and have to clean the pipes quite regularly.
Sorry to hear they are so strict. We are fortunate. I will probably burn one cord this winter if it is cold. Twelve cords is a huge amount but I know how cold it is up there. I think my uncle burns about 10 in northern Michigan every winter. Hope you are well.
@@CountryLivingExperience Thanks Eric. I look forward to your youtube videos every Tuesday. They are all different but are very well done. Especially like the canning one where you did the pears.
Thank you so much Lynda.
What if you have a metal roof? This is a very helpful video
Thank you. Metal roofs require a completely different connection kit. You can probably find it on the DuraVent website.
I voted for Ron Paul in 2012 also
Awesome! We could sure use him right now.
Best President we never had!
Great Video. One thing I noticed was the lack of a damper. Is it necessary for all wood stoves?
Thank you. You don’t need a damper in most modern stoves. If you have an older stove it is better to have one.
I subscribed for the t-shirt!
Awesome!
Love your t-shirt. Ron Paul is a great man.
Awesome! He absolutely is. Glad to have you here.
Good video, but you should have pulled the shingles to bull the roof Jack down and seal all the nail holes. One hard blowing rain, you’ll find leaks.
Thank you. They have never leaked and resealed perfectly.
A closer look inside the attic would enforce confidence. Otherwise, your video is a great educational video.
Be confident. You can do it.
Great video, well done!
Thank you
What about people with a metal roof ? Great video.
Thank you. There are different kits that you can buy for a metal roof.
Awesome t shirt 💞
Thanks so much!
Ron Paul!!! ❤️🔥🔥🔥🔥❤️🔥
Good video. Love the shirt...
Thank you
If that roof flange was installed correctly .. And it was ! you DO NOT need any sealer on the bottom. Reason ? If ANY water makes it underneath that flange then it is installed wrong to begin with. (Roofer) You mentioned only putting dabs on the bottom so water could drain out. Well as I said if water is underneath that flange ,ITS WRONG! OVERALL great job!!
Thank you. Much appreciated.
I do agree, however I was a roofer for some years. And I recall us putting a bead only underneath the shingles around the rim after the boot/flange was installed. That is where water is going to get underneath if anything. And freeze and cause rot Etc. As a roofer you always have to think like you're a stream of water. I'm only watching this because I'm planning on installing a wood stove and I have to refresh my memory as it's been some years lol
Love that shirt.
Awesome! Thanks
Very Good.
Thanks!
Hello, I did enjoy and appreciate the tutorials. I am needing advice on costs. My chimney pipe was damaged during the Little Rock tornado and I just need to replace a portion of the pipe. I was recently quoted $1400 to replace the pipe and collar. May I send you a picture of the damage so that I may get further advice from you.
Thanks. Most of the money is probably labor. The chimney pipe is about $150 per 3ft section. The collar is not that much.
Dude was still rocking a Ron Paul shirt in 2020? 😂. Good video though.
Like the shirt.
Cool. Thanks
Ron Paul 2012 Shirt? Auotmatic like!
Awesome!
did the same install talked to a sales tech to help with order since this stove install was my first rodeo
the did not sen the adaptor for the celing box
At least they are nice and send out the missing parts right away. They do need better quality control though.
Good job
Thank you
Great advice
Thanks
I was hoping you might be able to give me some information or direction on a problem I have with a wood stove in my home. When I wasn't home my husband and his friend made the cut through the ceiling to install the stove pipe wood stove just about right in the middle of the living room and it's a really isoland people come in and I'm getting ready to sell the house and I want to take it out so people can figure out how to arrange their furniture it should have been put more closer to the wall or in the corner so I was just hoping you might have advice. I just put a new roof and I don't want to mess with taking the part that's sitting on top of the roof out and mess up the roof and I said to the contract and maybe we could just seal it from the inside and whoever buys my house if they want to buy another wood stove and put it in they can or they can get something else but what is your advice on taking it out and sealing it up from the inside and not missing the outside of the roof because it is a new roof and we get a lot of snow here in Colorado I don't want any snow or rain to get under it and have a leak.
I would take it completely out and have a roofer fix the roof personally. This is more of a question for your real estate agent and a contractor.
I liked the thoroughness of your video, very helpful. Did you have to install a cold air intake pipe at bottom of stove?
Thank you. No need for an intake on this model stove.
Good video thank you
You're welcome
I’ll never understand sealant under the flashing and then sliding it into place. It’s just smearing on the roof with no way to form a seal. If you dropped it straight down without moving it, maybe.
Ron Paul!!
i like your shirt
Thank you
Very Good!
Thank you.
Thank you
this video is super helpful!! could you tell me what kind of piping is needed to run between the fireplace and the ceiling? is it a single layer black pipe or does it have to be double or triple wall as well? Thank you for your help!!!
You’re welcome. It is actually a double layer Duravent DVL stovepipe. Single wall gives off more heat though.
Single wall will require a minimum of 18” clearance to combustible material. Double wall is only 6”. Important information
you need three more of those storm collars on there
I was thinking 10 more.
Back in my day you just lay on the floor with your rifle and just shoot and yep there's your center. All the way though. 😂
lol
ha ha!
Did you put any sealant on the underside of those shingles ? Also, what kind of screws did you use to secure the flashing ? You made an excellent video, I'm going to use your video and Knowledge to install my furnace flu pipe through my garage roof. One other thing do you know how many feet you have to be above the ridge/peak of the roof. I'm like 3' feet away. Thanks if you could answer those 3 things for me. I would appreciate it. Thank you
Thanks, I appreciate it.
No sealant needed. The shingles were new so their sealing strips are still very good. I used decking screws since they are coated and won't corrode or rust (for a long time). You should be 24" above that ridge line.
@CountryLivingExperience ok great, thank you for getting back to me, I ordered all of my selkirk through the roof kit. Looking forward to getting heat in my garage this winter. Yeah I have older shingles, I'll probably have to get a tube of roofing cement/cork. Looks like an easy enough job to do. Or you just made it seem that way, lol. Ok have a good night. Thanks again
@@nickpanhead7209 You're welcome. Good luck with the project.
Just one more thing Did you use the Dap, polyurethane sealer on both the under sde of the flashing and around pipe collar. Will that also work to keep my older shingles down, or should i buy something else @CountryLivingExperience
@@nickpanhead7209 I used the DAP everywhere. Since I had a double wall chimney pipe, I didn't have to use the high temp stuff. The DAP should keep your shingles down too but be careful where you put it.
Great video. At 21:50 you mention a link to a worksheet or website that helps with the calculations for the chimney pipe spacing and clearance’s. Do you have one you recommend? Thanks!
Thank you. Here are a couple of sites that are very helpful. www.northlineexpress.com/help-pipe-install-planning.html woodstovepro.com/articles/understanding-the-10-foot-2-foot-3-foot-rule-how-to-determine-the-chimney-height-of-class-a-solid-fuel-pipe-above-the-roofline/
I subscribed, thanks!
Welcome to the channel
Oh my! Everyone stop nailing or screwing the bottom flange. Caulking on the top will do no good when water gets under the flashing.
Great info; thanks.
Glad it was helpful!
Pretty good!!! I’m aiming into that project. Are all stoves the same?? Any particular reason to choose one from another?
There are two types....catalytic and non-catalytic. Catalytic wood stoves differ from non-catalytic in that they produce fewer exhaust fumes and burn more efficiently. In addition to burning wood, catalytic wood stoves also have a combustor that burns the smoke and byproducts.
Did you have to put anything under the shingles that you pulled up that laid over your flange?
Also did you seal the gap between the edge of the shingles you cut and the insert?
Thanks
Nope. No need to do either.
Gracias Gracias ❤
De Nada
Nice video! I'd like to know how one keeps from smearing the adhesive all over the decking and keeps a good bead under there to get good surface adhesion when reinstalling the flashing after the dry fit.
The adhesive shouldn’t be that runny. It should stay where you put it until you get the flashing down.
Use LOTS, double what he used and lift the flashing up high enough as you slide it up in there so as not to smear it all off the leading edge - he could've done a better job with the flashing, otherwise excellent vid
Or just remove the shingling around the area and reinstall it after you’ve secured the flashing. They make roofing tar in tubes to reseal shingles.
Did I miss the section when you installed the interior pipe?
You can see it from the beginning of the video and I also talked about the missing part at the end. Do you have a specific question about it?
What are your thoughts on putting a wood stove in a split level home from basement to first floor is 4 steps and to the second is 6 steps. Using a wood stove to heat the home over the furnace?
It is going to be difficult to move that heat through the levels. I would put one in just for emergency backup and comfort.
I got quoted 1600 for labor to install my wood burner. That's too much for what amounts to 6 hours of work (maybe)
Wow. You can absolutely do it yourself
Thank you for your video. How do you install the stove pipe on a metal roof?
You're welcome. I have never installed one on a metal roof personally. I do know that there is a special kit that you can get for a metal roof. All the other pieces and processes are the same as in the video.
Same process basically except you’ll have to deal with overlapping pieces of roofing sheet metal instead of shingles. In essence you want everything overlapping so water runs off and away.