KIA OPTIMA ENGINE NOISE RATTLE, ENGINE NOISE TOP END FIX

Поділитися
Вставка
  • Опубліковано 28 жов 2024

КОМЕНТАРІ • 76

  • @WorldMechanics
    @WorldMechanics  3 роки тому +3

    ⛐ Check out our Garage to see what tools we use and recommend:
    www.amazon.com/shop/worldmechanics
    ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ua-cam.com/channels/J9xpq0qUZevSEdBSFqO2ow.html
    ⛐ Link to donate on GoFundMe: gf.me/u/y4u9cd

  • @01stockton
    @01stockton 3 роки тому +49

    Would you happen to have a video showing the sound it makes? Thanks you.

    • @MultiPeyton22
      @MultiPeyton22 Рік тому +5

      Currently trying to find a video with a example so I can confirm it’s the same noise lol

    • @hunnedkaydae
      @hunnedkaydae Рік тому +1

      @@MultiPeyton22 same lol

    • @JoelRamirez-os1ec
      @JoelRamirez-os1ec Рік тому

      Good question sir

    • @Vids599
      @Vids599 Рік тому +2

      ​@MultiPeyton22 it would sound like vw diesel

    • @benzendejas5313
      @benzendejas5313 Рік тому +2

      I have a 2012 that when you come to a stop it makes kind of a grumbling noise you let off the brake or put in neutral it stops. When first started would only happen at stop but now while driving it happens also. Could it be this issue with fuel pump

  • @Dag0421
    @Dag0421 3 роки тому +17

    Thanks for this. I had a rattle in my engine that I was convinced was the timing chain. I ordered this part and installed it but was not satisfied it would fix the problem because the one I took out didn't seem too bad. I took it for a drive and the rattle is gone now. Thanks again 😊

    • @oleglog6927
      @oleglog6927 3 роки тому +1

      Rattle was only at cold start or permanent?

    • @Dag0421
      @Dag0421 3 роки тому +6

      @@oleglog6927 During acceleration All the time. It is now gone since installation

    • @Cummata
      @Cummata 2 роки тому

      What year is your car? I have a rattling sound on acceleration and Kia basically told me to run a few tanks of premium fuel through it or get a fuel injector cleaner, but I think they are full of it....My car was burning oil and they couldn't even diagnose that is was the pcv valve.

    • @oleglog6927
      @oleglog6927 2 роки тому

      I changed this camshaft follower and my pump started to make metal rattle noise:( and leaks oil a little, I wish didn’t touch it…

    • @practicetunes
      @practicetunes 2 роки тому

      @@Cummata yours still running? Mine died at 87,700. Total engine fail, not even a warning light.. 2016 optima useless and not even paid off!

  • @sgfry89
    @sgfry89 Рік тому +2

    Would this apply to the hybrid model as well? What I'm hearing is a ticking noise, but no so much a rattle.

  • @Handlehandlebars
    @Handlehandlebars 2 роки тому +3

    So are we talking a rattle under acceleration or at idle?? I test drove an 11' optima and didn't buy it cause it had a chatter after 3k rpm

  • @phathick2003
    @phathick2003 3 роки тому +1

    If this is bad does it only rattle when you start it or does it rattle all the time?

  • @talent8590
    @talent8590 2 роки тому +4

    Damn I wish I would've found this out before I put my 2017 Kia on a cross country road trip to Montana from Orlando. If I knew I would not have done it. Now my car is broken down 6 hours short of my destination. So pissed right now.

  • @zarakikenpachi3395
    @zarakikenpachi3395 3 роки тому

    would it be possible to just replace the camshaft follower if its not triggering any codes, and would i need to replace the fuel line?

  • @antaresVJ
    @antaresVJ 3 роки тому +13

    Would like to hear the actual noise

    • @zarakikenpachi3395
      @zarakikenpachi3395 3 роки тому +5

      it just a loud ticking sound, like metal on metal usually hear it most when starting up engine or accelerating. its very noticeable louder than engine.

  • @edr822
    @edr822 3 роки тому +13

    Take a shot every time he says "guys"

  • @jonasramirez2473
    @jonasramirez2473 3 роки тому

    Do you have a video on back break lights not working when pressing on breaks but 3rd light works and turn signals work also.

    • @PhysifistEngineering
      @PhysifistEngineering Рік тому

      It's the sockets. They are loose from the heat of the bulbs. They also have a recall on the brake light switch.

  • @gm4ulkill
    @gm4ulkill 2 роки тому +5

    If it makes a small Metalic rattle as you accelerate up a hill or a small incline. Then you have this issue. It’s very common in kias especially Kia optimas

    • @nesmacinvestmentsllc772
      @nesmacinvestmentsllc772 2 роки тому +1

      I have the exact same problem

    • @gm4ulkill
      @gm4ulkill 2 роки тому

      @@nesmacinvestmentsllc772 instead of regular gas. Put premium and watch the noise go away. Also run a treatment of fuel injector cleaner.(5$ at auto zone) put it into the tank of gas and watch your Kia come back to life. I would also just replace that bearing and go back to regular gas.

    • @Joeymac181
      @Joeymac181 Рік тому

      I remember bringing it to dealership and they told me it was normal kia sound 😪 how do I know the difference.

  • @georgibarrera7482
    @georgibarrera7482 Рік тому

    Where I can find that piece

  • @thowe2823
    @thowe2823 Рік тому +2

    Warning!!! Yes this is a good video, but if your engine is making noise this probably NOT the issue. Look up videos about the Kia engine recall. Make sure you have the KSDS update or you will be sorry! I have a 2016 Kia Optima and engine completely froze. This is a known issue. KIA has a lifetime warranty but only if you have the software update…beware!

    • @Alexinthecut
      @Alexinthecut 11 місяців тому +1

      What Kia exactly? How do I get this update?!!!

  • @armaan1010
    @armaan1010 2 роки тому +1

    I have KIA Optima 2016, but I can't locate high pressure fuel pump in same place shown in this video... where it can possibly be?

    • @Maverick_Maple_Syrup
      @Maverick_Maple_Syrup Рік тому

      I believe it on top of the tank. Pull down the back passenger seat and lift the carpet. Then open the small metal hatch

  • @noeygarza64
    @noeygarza64 3 роки тому

    Thank you so much. Very detail info..

  • @omarcarnegie7614
    @omarcarnegie7614 3 роки тому +1

    How much miles before the cam follower fail?

  • @restevez926
    @restevez926 2 роки тому +3

    I have a 2020 Kia optima and also makes that sound when Im accelerating

    • @haleymarie3153
      @haleymarie3153 2 роки тому

      I do too! It happens around 2250-2500rpm. Did you take yours to dealership??

    • @nesmacinvestmentsllc772
      @nesmacinvestmentsllc772 2 роки тому +1

      I do too. It happens for me at most when it’s cold and I drive it immediately. As it warms up it goes away for the most part. But at times it can still be heard. I was told it has something to do with the fuel injectors…. I complained at the dealership twice and they couldn’t find anything wrong.

    • @MattDayetime
      @MattDayetime 2 місяці тому

      My car does the same thing

  • @monicagrimaldo8
    @monicagrimaldo8 8 місяців тому +1

    What was that part? Couldn’t understand him.

  • @galaxytraveler5779
    @galaxytraveler5779 3 роки тому

    My engine sounds loud but it's there isn't any squeal or knock, its just sounds like the belts but it's louder than most other cars and i remember it being quieter. 2014 Kia Optima.. could it be what he is describing? Or belts just getting worn out perhaps?

    • @chad5660
      @chad5660 3 роки тому

      I have a similar issue I think, we’re you able to fix it?

    • @CarlosRodriguez-iq8iy
      @CarlosRodriguez-iq8iy 3 роки тому

      @@chad5660 we’re you able to fix you car I have the same issue replaced timin chain

    • @CarlosRodriguez-iq8iy
      @CarlosRodriguez-iq8iy 3 роки тому

      Sorry hey Chad we’re you able to find the noise on your Mía I have the dama problem I replaced timing chain and fuel pump cam follower and still have the noise not a rod knock either

    • @billuhman
      @billuhman 2 роки тому

      @@CarlosRodriguez-iq8iy try the passenger side motor mount. These guys have a video on it too. I'm pretty sure that is my issues. I replaced this part. The primary noise is still there but it did seem to quiet it a little. There was a little bit of play in the old part but not much different than the new part.

    • @billuhman
      @billuhman 2 роки тому

      @@CarlosRodriguez-iq8iy I replaced passenger side motor mount on mine and the weird noise went away for me. Those can cause some odd noises. My old car had same sort of issue. At high speed and acceleration it made a weird noise. Took a lot of mechanics to figure it out.

  • @johnellison7222
    @johnellison7222 Рік тому

    Aye boys if you’re here watching this right now, just go ahead and get the cam follower…. I put it off too long, and now the little rattle on acceleration has turned into a very aggressive knock. My engine is done. So if you’re hearing the rattle now and you’re reading my comment, go ahead and get the part. I’m only at 90k miles too.

  • @monicagrimaldo8
    @monicagrimaldo8 8 місяців тому

    I called the dealership in my city and they told me that there is no such thing as a camshaft follower. Is that part called something else?

    • @Q70L5.6AWD
      @Q70L5.6AWD Місяць тому

      ROLLER TAPPET
      Part Number: 353252G700
      Supersession(s): 353253F100

  • @CertifiedIntroverts
    @CertifiedIntroverts 28 днів тому

    Cold 🥶ass accent

  • @Sauhcington
    @Sauhcington Рік тому

    It's a bummer you guys are the only recommended video for Kia shit and you don't even give an example of the sound.

  • @sasbigby3
    @sasbigby3 Рік тому

    Let us here the engine so we can narrow down if thats the right sound

  • @anthonybosco727
    @anthonybosco727 2 роки тому

    Thank you so much, I was about to start ripping out my beard

  • @selfmadeentertainmentt
    @selfmadeentertainmentt Рік тому

    Is he saying cam follower?

    • @Q70L5.6AWD
      @Q70L5.6AWD Місяць тому

      Yes, Kia calls it a roller tappet

  • @fcssensai
    @fcssensai 3 роки тому

    Do not reuse the metal line when you do this

    • @oleglog6927
      @oleglog6927 2 роки тому

      Why? So it doesn’t leak?

    • @fcssensai
      @fcssensai 2 роки тому

      @@oleglog6927 It's instructed in the replacement procedure that it's a one-time use line. It is not designed to be reused. Sorta like a crush washer, but this doesn't work like that.

  • @horancewhite1839
    @horancewhite1839 6 місяців тому

    I have one and it tapping

  • @sasbigby3
    @sasbigby3 Рік тому

    Slow down talking ur english is good, but when u go fast so hard to understand u

  • @ahadi9915
    @ahadi9915 2 роки тому

    Ok guys

  • @tony5825
    @tony5825 2 роки тому

    Where's the noise

    • @Q70L5.6AWD
      @Q70L5.6AWD Місяць тому

      Top end under high pressure fuel pump

  • @lucasignorello6512
    @lucasignorello6512 3 роки тому +1

    If you have kia you failed in life, buy Mercedes or Lexus

    • @keithzegowitz1682
      @keithzegowitz1682 3 роки тому +2

      Lexus? So Toyota...

    • @DeshaunNoLackin
      @DeshaunNoLackin 3 роки тому +2

      Well I’m sorry I’ll just be a failure and forget that Mercedes cuz you can’t fix it yourself have to go to a dealer mandatory. And a Lexus IS just about the same. I’d rather get a track hawk before that bull crap