Nissan 350Z/ Infiniti G35 VQ Engine Wire Clean Up | AnthonyJ350
Вставка
- Опубліковано 20 сер 2024
- In this video we show two different options to cleaning up the wiring on the front of a Nissan 350Z or Infiniti G35 engine. The factory installs an engine cover on these vehicles which hides the factory wire harnessing. I like to take the covers off because they retain heat and I also like to appreciate the engineering and design of the engine.
#Nissan #350Z #WireCleanUp
Subscribe for more automative tips!: bit.ly/sub2anth...
Watch my most popular uploads!: bit.ly/anthonyJ...
Website: gofasthavefun.ca
Instagram: / anthonyj350
Twitter: / anthonyj350
Facebook: / aj350
Shop: www.amazon.com...
Music available - www.jinglepunks... & www.epidemicsou...
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (www.gofasthavef...) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
Nissan 350Z/ Infiniti G35 VQ Engine Wire Clean Up | AnthonyJ352
• Nissan 350Z/ Infiniti ...
ANTHONYJ350
/ anthonyj350 - Авто та транспорт
I feel like leaving it open also helps for air flow. Allowing air flow to flow through there to keep the bottom of the mani top off the engine cool when moving.
Yes, should help the insulation last longer.
I believe the hole there at timing house was for cooling. 35DE has fan-cooled model for some heavy duty vehicles. The pulley next to the alternator was for the fan, and it left useless there on water-cooled models.
Thanks for sharing this!
I have an electrician working on my G and he has moved that ground to another part of the engine bay and says it's alright to do so.
As long as it's a good ground point in theory it's fine.
nice video , I do like the way you did it first, might give it a try, also a question for you, what kind of upper plenum is that ???
Thanks for watching! It's a factory plenum painted with black high heat paint. There's also a Motordyne 5/16 spacer and MREV2 installed.
what kind of clamp did you use on the right side of the engine?
Which part of the video?
Hey Anthony, Will the rev up wiring harness work on a regular DE?
I need to basically re-do my wiring harness for my 03 MT 350Z but can't find any harnesses out there for regular DEs
I don't think so. There's extra valve timing on a REVup. You can try verifying with Z1 Motorsports.
The older infiniti's have these rare short chrome bolts perfect size so you won't need the washer where the acorn sits. Nice wire tuck! Do you think it matters which order of tape layers are put first?
I don't think order will matter too much since it's not ultra hot in these areas.
AJ, well done, as usual, I have the same rev up in my 06.5 Z, how is your catch can working out, is it still unmounted, with the exception of gravity and tight fit? Also what are you using to keep your engine bay so clean? Mine stays fairly clean but has 13 years/39k mi. of light dust accumulated. Also since you are in Canada, what do you know if anything about the Recochem/OEM coolants, made in Canada, are they legit, and high quality? Best regards.
Thank you. The occ is mounted, and has been awesome. Here is the video. I just use coolant that's factory fill and works good for me and mix it with distilled water.
Where did you get those insulated clamps to hold the main wiring harness?
Got them from my local auto parts store. They're insulated stainless steel clamps.
@@AnthonyJ350 Thanks for the quick reply!
I would pay for this.. I’ve been working in the car too long.
Need to bring the car to your local installation shop.
hey bro, do you think you can help me out? So recently and tragically my ABS module caught on fire (my abs has been buzzing even when the car is off and I would always unplug the negative terminal on my battery, we’ll one day I forgot to unplug it and i guess it overheated and caught on fire) i put it out in time and it burned some of the wiring by there. My headlights don’t turn on, my rpm stays at 0, my temp don’t work, basically most of my cluster doesn’t work. So i was wondering is there like a wire harness i can replace in order for my headlights and taillights to work again. Car drives fine but I just want to be able to drive at night.
You might want to contact Wiring Specialties, they build harnesses www.wiringspecialties.com/
@@AnthonyJ350 do you select the universal or standalone? All the rest are for engine swaps
@@Mivic666 I've never purchased from them yet. It's probably best to call them so you get exactly what you want.
@@AnthonyJ350 ohhh alright, ill just have to give it a shot
Hi Anthony, Off topic question here. Would you recommend a tyre set up 245s width (Deep dish rims) on the rear and 235s on the front or larger for a better grip and handling since its a RWD ? I had this set up on my twin turbo Soarer and found it helped with the traction and LSD when doing launches etc looks good too but performance wise do you see the benefits?
I would go wider if you can. This is my setup with specs ua-cam.com/video/x9XLGAojw6w/v-deo.html
Thanx Anthony for your reply love your content big fan and fantastic to see s UA-cam replying to there fan's. Love from Sydney Australia. Do you have a Po Box for us to send you fan mail ?
@@andrewpaige9152 Thanks so much for being a viewer! Currently I do not have a P.O. box.
Anthony could you help me I'm doing a project and would appreciate a pin out for the vq35de
You would have to get the info from ALLDATA which requires a subscription.