Hope you guys have enjoyed this video! Be sure to subscribe to my channel for more content! Spotify Music Playlist: open.spotify.c... Thanks for watching!
The system takes a couple of seconds to come on because of the safety of the power amp built-in if they are flying in a venue...you are not getting on a ladder to turn them on and off, therefore the delay on the amp help to prevent it from damage.
Awesome review and very inspiring! I liked and subscribed to your channel. I just bought these speakers and i love em. Im about to make a review on them myself! You game me a lot of good ideas lol. Keep up the good work!
I just bought a set a few weeks back. I've noticed after 1.5 hrs of use the back panel becomes extremely hot to the touch at 50 - 65% gain & volume. I have small battery power fans to cool off the back fearing it was overheat & blow the capacitors.
Can you do a video of these running passive to your full range amps at the bottom of the rack? Instead of using the build in amps I want to see the quality difference.
Maybe you can help me decide. I have a small band, mostly acoustic, I run vocals, guitar, kick and every once in a while, the bass (if my bass player brings his small bass amp). I've been running original JBL non powered eons. They've served me well for 20 years and still sound great. But it's time to upgrade. Do you think these would make a good upgrade or should go with the 615's? I'm also looking at the QSC k10's, but they cost nearly twice as much. Thanks for your input.
The best cabinet in its category. All the power of Harman brands. Crown power amp in impressive. Sound is amazing. Contrary to what says a reflected comment, it is true that JBL makes some loudspeakers in China and a lot in Mexico JBL factory near south California. These loudspeakers are made in the own factory of JBL/Harman with criteria of manufacturing very serioust in raised, otherwise the oldest mark of the audio industry could change name. JBL. Let us be serious, JBL it is the reference since 70 years. Produce poor quality products would be suicidal.
Hey Doublsmm I just wanted to ask do you have any experiences with the behringer b115mp3 and behringer b1500d-pro speakers? I want to buy one of each just for home use as I really like my bass and music. However I do have a few questions as i'm a complete newbie with PA spakers. I've heard people say you may need to use something called a high pass and low pass filter for the two speakers? Also, have you heard them? Do they sound good? And one more thing, how would you connect the two speakers ? What cable would I need to purchase? And just a note; Would they still sound good if I don't use an amplify do power them (because they're active) as I don't want to spend too much money because it will only be for personal use and not for DJ'ing in large venues?
I'm gonna be getting those 2 but the 15s version and i can't wait t okill my neighbors with them. Inbcluding my 1600 watt 18 inch powered subwoofer. Also by the way what Seperate EQ sets do you have on your shelf that time you peaked out the speakers with? (I don't wanna peak dem but just wondering what the amps are)
For the best bass from a PA I would consider the ( JBL (715) ) single 15. Amazing speaker if you want loud hard bass. But still you will need a subwoofer for a deep punchy bass.....
I am looking to buy one of these speakers. I would need the speaker and a mixer and what other accessories? Sorry I know there might be information already but cannot get a straight answer.
Good morning Doublsmm eh acquired less than a week ago 2 eon 615. On 10-11-2017 was playing music at moderate levels and suddenly one of the teams is silent. The speaker turns on but does not emit any sound. Help please I'm from Argentina and the page from Argentina is inaccessible. Thank you very much Ivan Italo
I can't get my eon610 to pair with my phone so that I can use the app........It keeps asking for a Bluetooth pin/code. I've tried 0000 and 1234 and 1111 but nothing....
That isn’t possible, it’s not possible to transfer music date through to the speaker. This is a professional line of speakers made for touring, DJ’s and Musicians. You need to connect it through xlr which I recommend or a quarter inch cable.
Think bigger, even Partybox 1000 can't come close 😆 Generally, comparing these speakers is pointless, because they belong to completely different categories - all partyboxes are consumer grade products, and EON series are professional grade. And by the way, two EON612 speakers and EON618S subwoofer are even cheaper than two Partybox 1000 =)
@@JackBlack7790 partybox 1000 is equivalent to a 2.1 system with a 12 " subwoofer and 7" speakers but without stereo . Partybox 1000 against a single EON 612 will sound better with deeper bass but it's more expensive. PA speakers like Eon sound flat without a subwoofer .
To answer the OP's question, no you cannot play music through these speakers using Bluetooth. It is only there for changing the speaker settings on your phone using an app.
Nope, for studio work you need speakers with a completely flat and accurate response. These speakers are very curved in the way they are tuned. Plus, the transducers would be no where near good enough to accurately re create what you're doing. Therefore they would be pretty useless. For the money of these you could get some pretty good dedicated monitors so i would go that route if i was you
The best cabinet in its category. All the power of Harman brands. Crown power amp in impressive. Sound is amazing. Contrary to what says a reflected comment, it is true that JBL makes some loudspeakers in China and a lot in Mexico JBL factory near south California. These loudspeakers are made in the own factory of JBL/Harman with criteria of manufacturing very serioust in raised, otherwise the oldest mark of the audio industry could change name. JBL. Let us be serious, JBL it is the reference since 70 years. Produce poor quality products would be suicidal.
Although its hard to gauge how loud a pair of speakers are from you tube but they sound quite bassy and quite nice the sound i like , but not very loud ?
Doublsmm Hmm i quite like em , im not keen on that thing inside thougjh , but im using Alto tops they suited my pocket at the time of purchase but im thinking of upgrading after xmSs and doing a bit of a looking around . As long as they go louder than my 15" alto i be very happy with them , but the sound quality is lovely .😋
They have big caps in so they need to charge before it engages everything and the tweeters have smaller or less caps so take shorter time to turn on, IF IF they are bi-amped.
A1 CREATIVES STUDIO so if I had a pair of jbl 305 studio monitors, would the signal of those just go through it. Interested in an explanation and I can’t find one!
hi could somebody use for home use as close range for plesure to listen music or better studio monitors at this price range ? do the details get noticable in very low volumes at night for example ?
I never liked JBL PA speakers because they did not sound good enough or they was not loud enough sometimes both i've had 2 different sets of them and had to return them because they was just not good enough and they was the mid level cost i've always liked Yamaha, Mackie, and Cerwin vega for their PA speaker's
Jordan Benjamin you can't it's for EQ controls thats why there are no EQ knobs (knobs? Turn buttons? I don't remember) no music via Bluetooth unfortunately
@boworn54 Siri Only for the EQ App....... I know i wish it had music option but it doesn't... Sorreh. If you wantthe music bluetooth part get the mackie 15BST
Hey mate just a quickie ? I watched a video on here , one guy tested the 15"s with input level set at unity playing from an I phone just as a test, and compared them to Qsc 12 , and Mackie Srm450. All set at unity with a decibel meter. These were very quiet like for like at unity and full chat from the I phone . What I was wondering is can the input levels go past unity without reaching the Clip light ? I mean like they were going less than 90db where the qsc and mackie were pushing 104 db all set at unity .
Ahhh, I know what video your talking about and I also know why the JBL is so quite in that video, if you look closely you will notice the QSC and Mackie have one gain control for the sound. However the JBL has one for the input and one for the output that were both set at half so essentially the JBL was only turned 25% of the way up whereas the QSC and Mackie were at 50%. I've run really hot signals into the JBLs with the input level all the way (master volume obviously quite low) and never had any issues with clipping. Hope this helps you!
HoodiesMusic Hmm I been seeing these videos about the best tune for it ? Using a mobile or something I thought what the Heck is that about ? To be really honest I'm not a dj I'm just a music enthusiast , but I like it loud . With good sound of course my Alto 115a distort when you crank em up . I can't have the contour button on or it'll blow the Woofer up into orbit .
JBL EON 615 The best cabinet in its category. All the power of Harman brands. Crown power amp in impressive. Sound is amazing. i USE 6 as stage monitors in a blues rock band, never a problem of feed back, great bass power, extraordinary treble, mediums sings, all is perfect. Contrary to what says a reflected comment, it is true that JBL makes some loudspeakers in China and a lot in Mexico JBL factory near south California. These loudspeakers are made in the own factory of JBL/Harman with criteria of manufacturing very serioust in raised, otherwise the oldest mark of the audio industry could change name. JBL. Let us be serious, JBL it is the reference since 70 years. Produce poor quality products would be suicidal.
You should try to snag an old pair of JBL pro speakers from the 80's. The 80's was when JBL was building their drivers in the USA. Now JBL makes their stuff in Mexico and China but that does not mean they are bad. They still sound great but the older ones were far better because they were made entirely in the USA
The best cabinet in its category. All the power of Harman brands. Crown power amp in impressive. Sound is amazing. Contrary to what says a reflected comment, it is true that JBL makes some loudspeakers in China and a lot in Mexico JBL factory near south California. These loudspeakers are made in the own factory of JBL/Harman with criteria of manufacturing very serioust in raised, otherwise the oldest mark of the audio industry could change name. JBL. Let us be serious, JBL it is the reference since 70 years. Produce poor quality products would be suicidal.
EV ZLXs are rubbish, had a pair and without pushing them hard, the amps in them blow. these were the first batch when they got released, unless they've updated their parts, i stay clear from the ZLX Range
Oh they actually don't??? Because I was also thinking that 20 seconds was an over-exaggeration. Because my powered subwoofer at home has an auto start feature where if it senses a signal then the amp will automatically turn on and it does that VERY quickly and I know for a fact amplifiers do not need long to start themselves up
The system takes a couple of seconds to come on because of the safety of the power amp built-in if they are flying in a venue...you are not getting on a ladder to turn them on and off, therefore the delay on the amp help to prevent it from damage.
Thanks man, I'm thinking about buying these speakers and your review helped me so much!
What size ya getting? Just wondering. I'm gonna get the 15s version :3
The first sound test I didnt hear how good the bass was. BUT the second one ooof those I'm definitely going to buy
I'm getting the 15s version :3
That’s probably because he dose not a sub hooked up, these speakers are high and mid only....
Awesome review and very inspiring! I liked and subscribed to your channel. I just bought these speakers and i love em. Im about to make a review on them myself! You game me a lot of good ideas lol. Keep up the good work!
I bet his neighbours love him !
I just bought a set a few weeks back. I've noticed after 1.5 hrs of use the back panel becomes extremely hot to the touch at 50 - 65% gain & volume. I have small battery power fans to cool off the back fearing it was overheat & blow the capacitors.
that is the weak point with these speakers
i love how he has so many speakers... but the smallest tv...
Awesome video keep up the good work!
should check out the JBL SRX 815 damn expensive and bloody heavy, but they are one of the best things going round
Can you do a video of these running passive to your full range amps at the bottom of the rack? Instead of using the build in amps I want to see the quality difference.
Thanjs buddy great vid
2 for monitor or small gig 40 60 people.
excellent sources of audio...
would you suggest these for a small dj setup beings i don't want to buy a sub
i had altos ts110 for five years ,,,upgraded to these love them . i am just a basic DJ
Maybe you can help me decide. I have a small band, mostly acoustic, I run vocals, guitar, kick and every once in a while, the bass (if my bass player brings his small bass amp). I've been running original JBL non powered eons. They've served me well for 20 years and still sound great. But it's time to upgrade. Do you think these would make a good upgrade or should go with the 615's? I'm also looking at the QSC k10's, but they cost nearly twice as much. Thanks for your input.
The best cabinet in its category. All the power of Harman brands. Crown power amp in impressive. Sound is amazing. Contrary to what says a reflected comment, it is true that JBL makes some loudspeakers in China and a lot in Mexico JBL factory near south California. These loudspeakers are made in the own factory of JBL/Harman with criteria of manufacturing very serioust in raised, otherwise the oldest mark of the audio industry could change name. JBL. Let us be serious, JBL it is the reference since 70 years. Produce poor quality products would be suicidal.
John Miller the qsc k10 are awesome i have k12
John Miller try speakers from the electrovoice etx series. they are actually pretty good
Eric Morata they ha vfc e crown power amps in them
Other wise, i'd say check out NEXO or RCF Art series, they're insane output for the size
Can you do a review on the JBL EON 618S?
you are lucky for having these
Whats the difference between 612 and 615?
Hey Doublsmm I just wanted to ask do you have any experiences with the behringer b115mp3 and behringer b1500d-pro speakers? I want to buy one of each just for home use as I really like my bass and music. However I do have a few questions as i'm a complete newbie with PA spakers. I've heard people say you may need to use something called a high pass and low pass filter for the two speakers? Also, have you heard them? Do they sound good? And one more thing, how would you connect the two speakers ? What cable would I need to purchase? And just a note; Would they still sound good if I don't use an amplify do power them (because they're active) as I don't want to spend too much money because it will only be for personal use and not for DJ'ing in large venues?
good review.
Can you see any problem with a home preamp(marantz 7702) operating the jbls. I'm concerned with signal strength
if you plugin 2 xlrs for stereo, and you plug in "thru" to the other speaker, does it split the stereo between both speakers?
I'm gonna be getting those 2 but the 15s version and i can't wait t okill my neighbors with them. Inbcluding my 1600 watt 18 inch powered subwoofer. Also by the way what Seperate EQ sets do you have on your shelf that time you peaked out the speakers with? (I don't wanna peak dem but just wondering what the amps are)
For the best bass from a PA I would consider the ( JBL (715) ) single 15. Amazing speaker if you want loud hard bass. But still you will need a subwoofer for a deep punchy bass.....
Is your room sound proof
how do you sound proof a room? you can't, i think you mean acoustic treatment? absorbers etc
its hard to completely soundproof but there is a lot you can do to come close
The sub mode cuts the low frequencies out? I would have thought sub mode cut the high frequencies
Its whatever sound system SHOULD be .
How’s the bass? I’m considering these.
bass is so good
are they active?
that is powered by crown???
Are these good for a small to medium sized bar scene? I’m seeking to use them for karaoke.
Yes no problem
The "boot-up" is necessary for the class D amps.
Yeah just like computers it takes a few seconds or a minute to boot up and turn on.
I am looking to buy one of these speakers. I would need the speaker and a mixer and what other accessories? Sorry I know there might be information already but cannot get a straight answer.
Good morning Doublsmm eh acquired less than a week ago 2 eon 615. On 10-11-2017 was playing music at moderate levels and suddenly one of the teams is silent. The speaker turns on but does not emit any sound. Help please I'm from Argentina and the page from Argentina is inaccessible. Thank you very much Ivan Italo
thanks mate
I can't get my eon610 to pair with my phone so that I can use the app........It keeps asking for a Bluetooth pin/code. I've tried 0000 and 1234 and 1111 but nothing....
Dan Carlson user manual?
I dont see a selector for LINE/MIC. Only a graphic marker next to channel 1 and 2. Is there no selector ?
which mic are you using to record?
It seems like the bass response is controlled, which is important. Do these have bluetooth?
Djmann1013 did u even watch the vid? He said in the video and showed that they had bluetooth
How do I connect these to some Behringer Eurolive B1200D-PRO subwoofers
how to pair to bluetooth thru my phone. I just want to play music thru my phone via Bluetooth
That isn’t possible, it’s not possible to transfer music date through to the speaker. This is a professional line of speakers made for touring, DJ’s and Musicians. You need to connect it through xlr which I recommend or a quarter inch cable.
So does the QSC K8.2 wipe the floor with these?
I have a JBL10 the Bluetooth is blinking and no response on the board eq not changing
Awesome
how do they work outdoors?????
does channel In 1&2 allow rca connection from audio source?
is the thru connection an out? i need to know that before buying one as a vocal stage monitor, if i want to record without any headache. thanks!
thru is out for another JBL monitor speaker to pair with..
What kind of mixer are you using
Wich mic you use soud recod plzz replyy
Question is good to sing? thanks!
very good for a singing machine!
Which sound îs better 612 or 615?
What does the 6 mean?
how does that sound versus partybox 300 ?
Think bigger, even Partybox 1000 can't come close 😆
Generally, comparing these speakers is pointless, because they belong to completely different categories - all partyboxes are consumer grade products, and EON series are professional grade. And by the way, two EON612 speakers and EON618S subwoofer are even cheaper than two Partybox 1000 =)
@@JackBlack7790 partybox 1000 is equivalent to a 2.1 system with a 12 " subwoofer and 7" speakers
but without stereo
.
Partybox 1000 against a single EON 612 will sound better
with deeper bass but it's more expensive.
PA speakers like Eon sound flat without a subwoofer
.
Do they come as a pair
Hey there I can't connect to the bluetooh
only for app, just buy the alto bluetooth connectors for bluetooth$60 bucks
Can you pair your phone whit the speaker via Bluetooth? ?
I don't think the Bluetooth was made to play music thru..
yes you can. it helps you adjust the EQ of each speaker separately
To answer the OP's question, no you cannot play music through these speakers using Bluetooth. It is only there for changing the speaker settings on your phone using an app.
@@jbbenjamin just use a cable you momo. Yeez this is pro audio or just get a shitty bestbut bluetooth speaker.
You can conet to 2 s
I have a question are does speaker, wireless rechargeable battery. Can I use them without plugging them?
Noop... u can only use it plugged in...
quite an interesting world we live in today where Behringer might have better build quality than JBL on a powered speaker setup.
do you think they are good for home studio producers?
Nope, for studio work you need speakers with a completely flat and accurate response. These speakers are very curved in the way they are tuned. Plus, the transducers would be no where near good enough to accurately re create what you're doing. Therefore they would be pretty useless. For the money of these you could get some pretty good dedicated monitors so i would go that route if i was you
In fact the JBL LSR305 or 308 are EXCELLENT and priced right.
The best cabinet in its category. All the power of Harman brands. Crown power amp in impressive. Sound is amazing. Contrary to what says a reflected comment, it is true that JBL makes some loudspeakers in China and a lot in Mexico JBL factory near south California. These loudspeakers are made in the own factory of JBL/Harman with criteria of manufacturing very serioust in raised, otherwise the oldest mark of the audio industry could change name. JBL. Let us be serious, JBL it is the reference since 70 years. Produce poor quality products would be suicidal.
JBL sounds like shit what are you talking about. All they produce are high frequencies.
Although its hard to gauge how loud a pair of speakers are from you tube but they sound quite bassy and quite nice the sound i like , but not very loud ?
I had a bit of bass in the EQ just to prove the point they can produce those low frequency, cut that off and they get extremely loud!
Doublsmm
Hmm i quite like em , im not keen on that thing inside thougjh , but im using Alto tops they suited my pocket at the time of purchase but im thinking of upgrading after xmSs and doing a bit of a looking around . As long as they go louder than my 15" alto i be very happy with them , but the sound quality is lovely .😋
Qualità da Dio!!!!!
I can't get mine to pair = invalid pin... anyone knows what pin works for bluetooth connect? thx
I have the same problem. I don't think the Bluetooth was made to play music thru
Jordan 0000
factory reset, hold the EQ preset and EQ+ and turn on the power switch
all the buttons will blink like 4 or 5 times, then release and try again
they are a good option for a dj?
yes
Song?
Are they wireless or do they need to be plugged in
caleb barrett ....
Maybe watch the video?
JBL ENO 612 and 615 and then 618. best pa speaker
They have big caps in so they need to charge before it engages everything and the tweeters have smaller or less caps so take shorter time to turn on, IF IF they are bi-amped.
All that in that room!!??? Lmfao!! Goodddd
Por favor la explicacion que sea en español, gracias
What does thru means?
thru port is to connect it with another jbl monitor speaker with XLR
A1 CREATIVES STUDIO so if I had a pair of jbl 305 studio monitors, would the signal of those just go through it. Interested in an explanation and I can’t find one!
If you want to put another speaker it's also called tethering.
What a horrible place to sound test PA gear. Take then outside or something geez.
So this can't be used as a standalone full range speaker at home with smart tv??
6824648 😂 😂
They can.. but wouldn’t recommend them for that.
the bluetooth is only for app not streaming
Expensive but realistic!!! Sounds
Un po di lingua in italiano??
Heyy why I can’t connect to the Bluetooth?
the bluetooth is for app only
buy the alto bluetooth connector $60 bucks only
hi could somebody use for home use as close range for plesure to listen music or better studio monitors at this price range ? do the details get noticable in very low volumes at night for example ?
If you listen just music those speakers are awesome! but if you make music, studio monitors all the way up.
I use them all the time when i am practicing my dj mixes for the club
Hay quá,
everyone who wants to bluetooth music to pa speakers just buy the same level and priced behringer speakers
Yuk. Just get an external bluetooth adapter. Phones are ruining pro audio and hifi. Or just get those bestbuy $100 bluetooth speakers lol.
Subzero szs p15a?
I never liked JBL PA speakers because they did not sound good enough or they was not loud enough sometimes both i've had 2 different sets of them and had to return them because they was just not good enough and they was the mid level cost i've always liked Yamaha, Mackie, and Cerwin vega for their PA speaker's
shermann are also a good one
Jay Holley I'll test that theory if I ever buy anymore speakers.
I have the 10" ones sound really good for what they are and also cost me a steal to i bought them :)
Please let me know if it is possible to play music through Bluetooth on a phone or laptop. I've been trying for hours.
Jordan Benjamin you can't it's for EQ controls thats why there are no EQ knobs (knobs? Turn buttons? I don't remember) no music via Bluetooth unfortunately
@boworn54 Siri Only for the EQ App....... I know i wish it had music option but it doesn't... Sorreh. If you wantthe music bluetooth part get the mackie 15BST
where can i get these
dejuan fleming Guitar center.
You can get dem online on amazon and online on guitar center or if they have dem in stock in person you can get dem
These are good but not as powerful as prx series.
Като някоя жена, не млъкна през цялото време. Пусни няколко различни стила музика и млъкни за бога?
No complaints here with these speakers. Playback. Set the modes and forget it. U.S.A. what's going on in this video 📹 I'm not sure about his juice.
Damn Aussie, you may wanna get a little more tv to speaker ratio goin.
Barbies all have shrimps!!!
QSC k12! NOT K12.2
Dennison DeNatalie why?
Hey mate just a quickie ?
I watched a video on here , one guy tested the 15"s with input level set at unity playing from an I phone just as a test, and compared them to Qsc 12 , and Mackie Srm450. All set at unity with a decibel meter. These were very quiet like for like at unity and full chat from the I phone .
What I was wondering is can the input levels go past unity without reaching the Clip light ? I mean like they were going less than 90db where the qsc and mackie were pushing 104 db all set at unity .
Ahhh, I know what video your talking about and I also know why the JBL is so quite in that video, if you look closely you will notice the QSC and Mackie have one gain control for the sound. However the JBL has one for the input and one for the output that were both set at half so essentially the JBL was only turned 25% of the way up whereas the QSC and Mackie were at 50%. I've run really hot signals into the JBLs with the input level all the way (master volume obviously quite low) and never had any issues with clipping. Hope this helps you!
Doublsmm
Yes thank you
You've been a great help I've faith in JBL products and would be very surprised if they made a crap speaker.
Cheers 👍
Mark C i own a 15" and the sound will only reach peak if u use the ap
HoodiesMusic
Hmm I been seeing these videos about the best tune for it ? Using a mobile or something I thought what the Heck is that about ?
To be really honest I'm not a dj I'm just a music enthusiast , but I like it loud .
With good sound of course my Alto 115a distort when you crank em up . I can't have the contour button on or it'll blow the Woofer up into orbit .
JBL EON 615 The best cabinet in its category. All the power of Harman brands. Crown power amp in impressive. Sound is amazing. i USE 6 as stage monitors in a blues rock band, never a problem of feed back, great bass power, extraordinary treble, mediums sings, all is perfect. Contrary to what says a reflected comment, it is true that JBL makes some loudspeakers in China and a lot in Mexico JBL factory near south California. These loudspeakers are made in the own factory of JBL/Harman with criteria of manufacturing very serioust in raised, otherwise the oldest mark of the audio industry could change name. JBL. Let us be serious, JBL it is the reference since 70 years. Produce poor quality products would be suicidal.
should use better music with bass+
You should try to snag an old pair of JBL pro speakers from the 80's. The 80's was when JBL was building their drivers in the USA. Now JBL makes their stuff in Mexico and China but that does not mean they are bad. They still sound great but the older ones were far better because they were made entirely in the USA
The best cabinet in its category. All the power of Harman brands. Crown power amp in impressive. Sound is amazing. Contrary to what says a reflected comment, it is true that JBL makes some loudspeakers in China and a lot in Mexico JBL factory near south California. These loudspeakers are made in the own factory of JBL/Harman with criteria of manufacturing very serioust in raised, otherwise the oldest mark of the audio industry could change name. JBL. Let us be serious, JBL it is the reference since 70 years. Produce poor quality products would be suicidal.
PlatinumEagleStudio's it doesn't matter where its made if its made the same
Get QSC or RCF Speakers
EV ZLXs are rubbish, had a pair and without pushing them hard, the amps in them blow. these were the first batch when they got released, unless they've updated their parts, i stay clear from the ZLX Range
what mixer do I need to power 2 eon615 and 2 eon618s subs??
Any
I'm getting those 15s version today C: I'm dead dying to have dem arrive at the front door so goddam bad :C
Lol jbl eon is L O U D hahahaha that means he never heard a jbl prx 715
What is the video son'gs name ?
Give me this jbl speaker.
They don't take 20 seconds to boot up.
Oh they actually don't??? Because I was also thinking that 20 seconds was an over-exaggeration. Because my powered subwoofer at home has an auto start feature where if it senses a signal then the amp will automatically turn on and it does that VERY quickly and I know for a fact amplifiers do not need long to start themselves up
PlatinumEagleStudio's class D amplifiers need that boot up time it's also a fact
No bass g