Dude you're awesome, taking the time out to read, answer and help your viewers (I'm subscribing because of that). I have the S10-S...best bang for your buck. I love this scooter. My only complaint is that it doesn't indicate the percentage of charge it's at when charging. I got used to seeing that on my Ninebot Max...which I rarely use anymore (too slow) lol
My Joyor Y7-S started to prematurely lose power and then shut off altogether when I was still at 49V (48V battery). I’ll open everything up like you demonstrated here. Hopefully 🤞🏼 it’s just a connection issue, because I have my doubts that Joyor will assist technically. I’ll be sure to use the zip tie trick if that appears to be the issue !
You can turn off the speed limiter in the setting menu via the LCD screen. Hold both + and - gear shift buttons down at the same time while turned on. The settings menu will pop up and using the power button to toggle through to ‘P10’ you then use the gear selector ‘-‘ to change the value to ‘0’ (it’s set to 1 by default - or in other words, set to speed limiter being turned on). Much easier and better way to remove the speed limiter without permanently altering your scooter and potentially damaging other components.
Hello👍 I bought a S5 on Amazon, but nothing works, I charge it until the light turns green, but when I turn it on with the controller nothing works, not even the display. I think it could be a wire that was not properly connected? Thank you very much
I have the old scooter All you need to do is cut the blue wire on speed controller If you have a new one you need to get into setting on the display and turn it off And I can't do a video on it because I don't have the new version
@@DavidsHowtosReviews Hi, can u help me please? I cut the blue wire but then i got red alert icon on the screen and no throttle is there but when i connect the the blue cable again together it is working fine but there is a speed limit. What to do?
@@DavidsHowtosReviews Hi, can u help me please? I cut the blue wire but then i got red alert icon on the screen and no throttle is there but when i connect the the blue cable again together it is working fine but there is a speed limit. What to do?
This should be the correct battery 36V 48V 15Ah Ebike Battery Bike Lithium 48 Volt PVC E-Bike Bicycle Batteries for 500W/750W /1000W Motor with BMS and 2A Charger Balancing Electric Scooter Universal Backup Battery,48V 13AH a.co/d/i7wIsEp I believe that you probably can get a little bit bigger storage battery like a 15ah to go further on one charge there is plenty of room for the battery Just be careful going bigger with the watts I don’t know if the speed controller will be able to handle the extra power.
Hello, I have simple question. Can I use this electrogel for waterproofing wires and connectors like you did in your waterproof video ? Can you confirm this gel will be fine and not hurt connections or wire ? / DEN BRAVEN DISTYK ELECTRO 300ml / Thank you for your answer.
hi David, my battery controller (silver box) went out and I had bought one from a scam Chinese joyor website and of course didn't receive anything. I was wondering if you know where I can buy a replacement from a trusted source? I have the s5 also, thank you.
Wait in confused, bought mine on Amazon, hits 28 mph, but I'm only 160 lb.... says it hits 31... was I supposed to unlock the speed limiter somehow? Thanks in advance, would like to see what your s5 mph is, just thought 28 was fastest and they advertised it wrong or something
It’s so many factors One major is the advertised specs On there website is one thing on other sites Amazon, eBay, etc Other factors is Weather colder it is let’s say their test was 87deg they hit 31mph and u ride in 70 or even 60deg it will knock the speed down a little. But to hot 90+ the motor and speed controller will heat up and u will run slower Wind how much head wind u have Clothing you are wearing . Road surface, perfect black pot, dirt, bad black top, grass, mulch And mostly perfect level or slight uphill.. take any electric vehicle’s specs as around what it will do speed or distance.
@@DavidsHowtosReviews thanks a lot for your input I just got it running it turned out to be one of the connections behind the screen wasn't fully seated so I'm guessing it wasn't sending the signal
Yes All the parts of the electric have plugs Even the front light has a plug under the light Mine came off after dropping off a curb the first week I had it
No But owners throw up what the codes mean it the comments I have never see that one e-002 before Definitely check your wire connections up by the display and in the battery box
I got my scooter three days ago, unboxed it and charged it. after charge I rode it around quite a bit, approximately down to half the battery. I charged it and after about an hour the green light started blinking. pulled it off the charger and it was showing lower than it did before i put it on now every time i run it down which is like 5 miles i put in on the charger and an hour or two later it starts blinking green and it wont charge over the yellow battery indicator light. Any suggestions?
I would go on there website and let them know what is going on. But from what one viewer just told me these are not vented correctly and told me his controller burned out and his battery got super hot also He said he drilled holes in the front plate to cool them but I don’t know about that because dirt and water will get in So maybe let the battery and controller cool for at least a few hrs Also just in case just make sure the plug you are plugging into is ok Or try a different outlet I’m finding out these are very finicky.
It’s awesome. the only issue I’m having is I don’t know how to access the eco mode or anything like that. I don’t wanna use the eco mode but i don’t even know how to find the modes
I don’t think it has a lock I would think you have a problem with the thumb throttle Ether not going all the way or possibly needs to be changed or speed controller has something wrong with it
@@DavidsHowtosReviews yeah I would return it to but I don’t wanna go to the whole process and plus it’s just a minor issues only the side lights on one side but I’m pretty sure I can fix that easily
@@DavidsHowtosReviews one last thing is it possible because I seen that instead of the air up tires they put just all rubber tires and I looked up one video and it says the only thing you need to do on the screw the motor a little bit the bolts and then the other one goes straight on and you put the big plate circle plate back on the tire and it’s automatically on there I’m guessing
@@DavidsHowtosReviews and another thing is I seen that you had a video on how to do the back tires to take it off. You had to cut one of your sockets for that to fit. Does any other tool like a wrench a pipe wrench anything else that will take that off unless do I have to go buy the special tool that it really needs
Yes these are not fully waterproof There should be a fuse between the plug and the chip board / battery Check that see if it popped. They usually make a good bang snap noise when the blow. Probably will be a 40 or 50amp
I don’t know all depends on what happened Tough to say If you can diagnose with a digital volt, ohm meter you can maybe see where the electric stops or is still going to battery / chip board but chipboard is no good.
Dude you're awesome, taking the time out to read, answer and help your viewers (I'm subscribing because of that). I have the S10-S...best bang for your buck. I love this scooter. My only complaint is that it doesn't indicate the percentage of charge it's at when charging. I got used to seeing that on my Ninebot Max...which I rarely use anymore (too slow) lol
I check the amount of charge by turning on the display then turn it back off. Hopefully next generation will have better charger
My Joyor Y7-S started to prematurely lose power and then shut off altogether when I was still at 49V (48V battery). I’ll open everything up like you demonstrated here. Hopefully 🤞🏼 it’s just a connection issue, because I have my doubts that Joyor will assist technically. I’ll be sure to use the zip tie trick if that appears to be the issue !
You can turn off the speed limiter in the setting menu via the LCD screen.
Hold both + and - gear shift buttons down at the same time while turned on. The settings menu will pop up and using the power button to toggle through to ‘P10’ you then use the gear selector ‘-‘ to change the value to ‘0’ (it’s set to 1 by default - or in other words, set to speed limiter being turned on).
Much easier and better way to remove the speed limiter without permanently altering your scooter and potentially damaging other components.
This does not work with 1st gen I tried it
I ended up with a error code 400
Had to cycle the scooter on and off 4 times to clear code
@theflippestside
@@luukuh955 did you succeed removing the speed limiter?
The way he is describing is on the new gen scooters
If there is a blue wire it needs to be cut
Just like the suron bike
Thanks for showing this video. Now I can see the crappy workmanship that company does and avoid buying that POS
Lol
Not going to debate that
Thank you..I will try this
Put the controller on the top and drill holes in the plastic version to get good heat dissipation
I will look into this.
I did ck the temp after a ride and it gets hot
Thanks for the tip
Hello👍
I bought a S5 on Amazon, but nothing works, I charge it until the light turns green, but when I turn it on with the controller nothing works, not even the display.
I think it could be a wire that was not properly connected?
Thank you very much
Thanks for the video. How do you change the wheels front wheel can you make a video?
I’m planing on doing a video
I want to put green slime in tires also just in case we are far we won’t get flats
Can you do a video on removing the speed limiter please??
On the S5
I have the old scooter
All you need to do is cut the blue wire on speed controller
If you have a new one you need to get into setting on the display and turn it off
And I can't do a video on it because I don't have the new version
@@DavidsHowtosReviews Hi, can u help me please? I cut the blue wire but then i got red alert icon on the screen and no throttle is there but when i connect the the blue cable again together it is working fine but there is a speed limit. What to do?
@@wandelow14I have the same problem, do you find a solution ?
If you have a new model
Look for Joyor's UA-cam channel
They have a vid that walks you through the process it's kind of lengthy
Good luck
Is it possible to increase speed? Cuz my is only going 22 kmh max and i know it have the power to go 85 kmh max
I don't think you will get to 85
But should be about 75
Make sure the blue wire is cut in the speed controller in the battery box
Thanks for your fast reply 😃 i guess 75 kmh its more than enough for me 💪🏼
@@DavidsHowtosReviews Hi, can u help me please? I cut the blue wire but then i got red alert icon on the screen and no throttle is there but when i connect the the blue cable again together it is working fine but there is a speed limit. What to do?
Do you happen to know if you can buy a correct replacement battery for it?
This should be the correct battery
36V 48V 15Ah Ebike Battery Bike Lithium 48 Volt PVC E-Bike Bicycle Batteries for 500W/750W /1000W Motor with BMS and 2A Charger Balancing Electric Scooter Universal Backup Battery,48V 13AH a.co/d/i7wIsEp
I believe that you probably can get a little bit bigger storage battery like a 15ah to go further on one charge there is plenty of room for the battery
Just be careful going bigger with the watts I don’t know if the speed controller will be able to handle the extra power.
@@DavidsHowtosReviews thank you very much
Anytime
Hope u get it up and running
These are super fun
Hello, I have simple question. Can I use this electrogel for waterproofing wires and connectors like you did in your waterproof video ?
Can you confirm this gel will be fine and not hurt connections or wire ?
/ DEN BRAVEN DISTYK ELECTRO 300ml /
Thank you for your answer.
Yes if you can’t disconnect a wire for some reason you can just jam it in and around the connector. Use gloves if u can it’s hard to get off
@@DavidsHowtosReviews Thank you for information.
Yes absolutely
hi David, my battery controller (silver box) went out and I had bought one from a scam Chinese joyor website and of course didn't receive anything. I was wondering if you know where I can buy a replacement from a trusted source? I have the s5 also, thank you.
You can check the link in description and try these other sites
superscoots.ca/parts-accessories/
Hey, does this also work on a gs5?
Most scooters work the same
Way.
I’m sure it will
If you can, can you go through all the wires and see what wires does what That will be much helpful
On the s10s
Cuanto tiempo dura esa batería y si se malogra que puedo hacer para reemplazarlo?
Wait in confused, bought mine on Amazon, hits 28 mph, but I'm only 160 lb.... says it hits 31... was I supposed to unlock the speed limiter somehow?
Thanks in advance, would like to see what your s5 mph is, just thought 28 was fastest and they advertised it wrong or something
It’s so many factors
One major is the advertised specs
On there website is one thing on other sites Amazon, eBay, etc
Other factors is
Weather colder it is let’s say their test was 87deg they hit 31mph and u ride in 70 or even 60deg it will knock the speed down a little. But to hot 90+ the motor and speed controller will heat up and u will run slower
Wind how much head wind u have
Clothing you are wearing .
Road surface, perfect black pot, dirt, bad black top, grass, mulch
And mostly perfect level or slight uphill..
take any electric vehicle’s specs as around what it will do speed or distance.
Hello I just received mine today but only the screen turns work. None of the gears work and none of the lights. What do you think can be the issue?
Definitely check the connections in the battery compartment behind the front plastic cover
ua-cam.com/video/6cUxe7ADzVE/v-deo.html
@@DavidsHowtosReviews thanks a lot for your input I just got it running it turned out to be one of the connections behind the screen wasn't fully seated so I'm guessing it wasn't sending the signal
Yes
All the parts of the electric have plugs
Even the front light has a plug under the light
Mine came off after dropping off a curb the first week I had it
Do you know what the e-oo2 error is ?
No
But owners throw up what the codes mean it the comments
I have never see that one e-002 before
Definitely check your wire connections up by the display and in the battery box
Ok thanks you
I got my scooter three days ago, unboxed it and charged it. after charge I rode it around quite a bit, approximately down to half the battery. I charged it and after about an hour the green light started blinking. pulled it off the charger and it was showing lower than it did before i put it on now every time i run it down which is like 5 miles i put in on the charger and an hour or two later it starts blinking green and it wont charge over the yellow battery indicator light. Any suggestions?
I would go on there website and let them know what is going on.
But from what one viewer just told me these are not vented correctly and told me his controller burned out and his battery got super hot also
He said he drilled holes in the front plate to cool them but I don’t know about that because dirt and water will get in
So maybe let the battery and controller cool for at least a few hrs
Also just in case just make sure the plug you are plugging into is ok
Or try a different outlet
I’m finding out these are very finicky.
@@DavidsHowtosReviews so drill a couple holes in the plastic of the charger ?
There is a lot of viewers giving good advice look through the comments
There is a few saying to drill holes in that cover
just ordered mine
Nice good luck
It’s awesome. the only issue I’m having is I don’t know how to access the eco mode or anything like that. I don’t wanna use the eco mode but i don’t even know how to find the modes
@@stravocado
As far as eco mode I think they are referring to speed setting #1
#2 is your “normal” riding mode and #3 is turbo
@@DavidsHowtosReviews Ohhhh ok thank you!. btw if anyone asks, I’m about 250 and In the 3rd gear I average 23-24 but sometimes hit 25
That’s good!
What is the temperature outside?
Can you show how i can unlock the scotter my drives only 25kph
I don’t think it has a lock
I would think you have a problem with the thumb throttle
Ether not going all the way or possibly needs to be changed or speed controller has something wrong with it
There is a new comment on this video it may help you
Comment by Greg tucker
ua-cam.com/video/0_0o3qanfK8/v-deo.html
S10 s the right side side lights was not working after 2 to 3 days since I had it it stop working
If you just got it I would return for a new one
@@DavidsHowtosReviews yeah I would return it to but I don’t wanna go to the whole process and plus it’s just a minor issues only the side lights on one side but I’m pretty sure I can fix that easily
@@DavidsHowtosReviews and I have another question to how do you bleed the brakes and change the front and back brakes?
@@DavidsHowtosReviews one last thing is it possible because I seen that instead of the air up tires they put just all rubber tires and I looked up one video and it says the only thing you need to do on the screw the motor a little bit the bolts and then the other one goes straight on and you put the big plate circle plate back on the tire and it’s automatically on there I’m guessing
@@DavidsHowtosReviews and another thing is I seen that you had a video on how to do the back tires to take it off. You had to cut one of your sockets for that to fit. Does any other tool like a wrench a pipe wrench anything else that will take that off unless do I have to go buy the special tool that it really needs
My lights on right side wilö not turn of.i turn of scooter. But the light still on
Open up the battery compartment the wires are probably touching each other
Getting power from battery
What if I want to add a batter how could I go by doing that?
? I don’t understand
Hey my charging port blew up how can I get a new charging port
You mean melted?
Look on Amazon and eBay
And do a random search for charging ports for scooters
That stuff tends to be generic
@@DavidsHowtosReviews yeah I tried to plug it in and it exploded maybe faulty wiring or I think water got on the port when. It was raining today
Yes these are not fully waterproof
There should be a fuse between the plug and the chip board / battery
Check that see if it popped.
They usually make a good bang snap noise when the blow.
Probably will be a 40 or 50amp
@@DavidsHowtosReviews so I purchased a new charging port should that make the scooter charge again ?
I don’t know all depends on what happened
Tough to say
If you can diagnose with a digital volt, ohm meter you can maybe see where the electric stops or is still going to battery / chip board but chipboard is no good.