i have questions, if i wanna save gas i need keep stock buffer and change buffer spring 150% or 200% right , right now i use heavy buffer angry gun but my gas go out too fast idk why , can you tell me what’s should i do for my gun best
Thanks! I agree, the MWS is tough to beat. With this GHK set up in this configuration, it fires very much like the MWS. But with a touch more recoil and added metallic noise.
@@BadaBingPictures so what I did was removed the buffer and the spring then I put one small short stroke then the washer ring then put back the spring and put a new buffer is that correct?
William Seroyer It’s pretty much identical to a standard carbine buffer. I run a real buffer and it weights 3 ounces or 85 grams. The ghk actually weights 10 grams more.
The tokio marui buffer spring how much stiffer compared to the stock ghk? It is reliable to use with the LwBuffer? I have bought the enhanced ghk buffer spring and It’s too much stiff to be used with the LW buffer.. it causes doubleshoots.. Now im using the LW buffer with the stock ghk buffer spring but after many magazine and the bolt gets dried out, it needs maintenance as it’s really weak to push the bolt back.. then the MARUI buffer spring should solve the issue i think
Choose TM if you want performance above all else. GHK if you prefer realism and co2 compatibility. KWA GBBR’s are not popular within the GBBR community. I trust their decision tbh
Hi badabing, I'd like to know if this kind of upgrade could damage or wear faster the nozzle once the bolt will clicle faster. And I know you like to use propane, do you think that propane wear the internals faster than green gas?
Hi. Propane is exactly the same as green gas. Although some brand green gas can be a little weaker than others. The GHK M4 is able to be used with CO2 and if the nozzles are rated for CO2, using it with Propane/Green Gas will not effect wear the nozzle any quicker. The higher cycle rate won’t wear out the nozzle quicker. The Lightweight buffer won’t create a heavy impact on the nozzle, so it’ll be fine.
Nope. Sorry bud. FG airsoft has closed down now, so that’s why the link isn’t working I guess. Try google searching, you may find one left in stock somewhere.
I’m considering buying this rifle as a training rifle, but I’m worried the heavy recoil mod won’t be enough to make me feel that umf. What would you advise?
You could try an aftermarket steel buffer/heavy recoil buffer and stiff buffer spring. There are aftermarket bolt carriers available, but they aren’t that much heavier than the stock BC to be of any significant difference.
I don’t avoid them at all, although the pistols I can take them or leave them. As you say, I just haven’t got my hands on them. I’ve had experience with their G36, MP7, MP5, M4/M16/416 and Scar L GBBs. Really looking forward to their G3 GBB.
BadaBingPictures, you and me both with their G3. It’s my favorite modern rifle. The real steel’s bolt is a huge chunk of heavy metal. I hope the WE G3 isn’t plagued with issues from struggling to cycle the bolt. We will see though :D
I own a WE M16 and I also own a real steel Palmetto Arms AR-15. It looks exactly like the military M16, but it shoots semi only. Anyway, the gas WE M16 was maybe 1lb less than the real steel. But it’s hard to notice the difference in weight when in your hands.
This is the Colt trademarked GHK M4 Version 2. It’s GHK’s Gen 2 M4 with a few internal improvements and it is licensed by Cybergun. Far better than those ghastly Seal trades! 🤮
If it’s WA compatible then yes. Although there’s only one way to find out for sure. Trouble is FG Airsoft isn’t around anymore. So I doubt you can find these now.
You have such nice video, bro, and I just got my own ghk M4 V2. I saw the original buffer have a piece heavy metal cylinder, I just move the pin out and moved the heavy parts, than the buffer feels more lighter. I am not sure is that a new version buffer, but that make me feel good, cause ghk seems give us more choice.
Hello Badabing, I am going to get a GHK m4v2, also the Colt engraved one... But i cant decide between the 12.5" or 14.5"... do you have any words of advice for me? It would be really appreciated.
Hiya. They’d be both the same, just different length barrel sets, one is no better than the other. Although the 12 is a less popular choice. People usually go either 10.5 or 14.5, so you’d be one of the few. If you play in close quarters a lot then the 12.5 would be slightly easier to handle around corners and stuff. Also the inner barrels would be different in length and they would probably produce different FPS readings. On gas guns the longer the inner barrel the higher the FPS tends to be. What FPS did you have in mind?
in terms of accuracy will there be a difference? Presumably if I was going to be primarily CQB the shorter is better... But as I would be mostly at Ground Zero (south of England) which is woodland, the need for a 10.5 is negated. But I figured that the 12.5 would be a good all rounder, particularly if there is no real difference in accuracy due to shorter barrel compared to the 14.5?
You might find that the accuracy is no different. The 14.5 using a 1j nozzle gave me around 340 - 350 during the winter, but this summer it shot up to 400 or over. So I would recommend the low velocity nozzle instead and would keep it sub 350 all year round.
I run the VFC buffer which is very similar to the FG one coupled with the stiffer spring from Samoons. Snapiness is great, plus recoil feels different, more clunky 🙃
To be honest it’s quite gas efficient as it is. To make it slower you can use a heavier buffer/real AR buffer. This will help take away any bolt bounce and improve its feed.
@@BadaBingPictures You're one of the best for interaction. Have you consitered makeing a FAQ page for gbbr's? lightend buffer spring? would it make it even more effecant? I'm trying to make a gbbr as a real steel dry fire training aid. Recoil and fire rate are things im willing to sacrifice to get range and accuracy. .4 bb's, rHop, Co2 is what the grape vine has sugested to be best.
Thanks. It’s nice to maintain contact with the community. I haven’t, no. Mainly because there’s tonnes of sites with informative resources online. Especially with places like Discord, lots of people contribute on there and many of them have higher understanding of these things than I do. GBBR Heavy Recoil Club being one of the main servers. discordapp.com/invite/h6h7mBp
The stock GHK buffer spring is quite soft as it is. You could look into a lighter BCG. Check out YSC design & development Co. They produce aluminium bolt carriers that won’t produce much recoil, but should extend the efficiency more than the original.
Hi bud! If you can find one, buy one. If you don't mind the reduced recoil sensation but crisper shots, this might be what you're looking for. FG Airsoft isn't around anymore unfortunately. He's decided to move onto other things.
Hey! Quick question how would I go about cleaning my GHK M4? And more specifically what oil do I use? Also I would highly recommend making a video on this considering a lot of your fan base owns GHK’s Thanks!
Hiya. It’s nothing scientific. Just use paper towel/rag on the BCG, inside upper/charging handle and clearing away grit and dirt from the lower. Using Q-Tips/Cotton wool on a stick to attack hard to reach areas. I back up some of the paper towel/kitchen roll inside the buffer tube to get any other dirt that’s deposited in there. Remove nozzle from BC and ensure it is free from dirt on the o-ring base. Then apply silicone oil to those rubber o-rings. I use GHK Silicone oil and lightly coat the BCG and maybe a drop on the hammer/striker. Reinstall and function check. With the inner barrel, I send a couple of small patches of tissue on an Airsoft cleaning rod, through the barrel. I turn off the hop up to prevent damage and in case of grease and grime, I may put a dab of cleaning alcohol on the patch and push it through. Ensuring I don’t ride over the rubber bucking. Repeating with dry patches until a fine sheen. Everybody’s different and we all have our own “standards”. Mine is a very casual approach to maintenance. Thanks for the suggestion, I may look at doing a vid on this subject.
I briefly tested the buffer within the A5 so I wouldn’t know about it’s long term effects. As it’s lighter than the original, I’d think it would be easier on the internals. Faster yes, but less stress as the bolt carrier moves easier. That’s my take on it anyway.
Hi, I want to upgrade my GHK M4A1 with a 'PTS Raptor Ambidextrous Charging Handle', do you know if other brands fit too, for example Western Arms? Because on Samoon the normal one is out of stock for a long time already.
Yes. I don’t see why not. The FG buffer is compatible with the WE M4. The WE recoil spring should be sufficient. The TM recoil spring isn’t heavy/stiff.
Thanks, yes I have a CO2 magazine that I’ve used for testing but I primarily use propane as I have a tank that I refill the smaller cans with. Super cheap!
Hey thanks for the vids ! Have you ever tried FG Airsoft Heavy Speed Buffer ? It increases the ROF, cyclic speed and recoil they say, I'd like to know if it's real :D
I honestly feel like this makes no impact on semi auto firing. Even with the stock buffer and spring the rifle cycles faster than you can pull the trigger. The limiting factor when it comes to semi auto rate of fire is your finger and the quality of the trigger itself. (Unless you’re Jerry Miculek 😉) But maybe I’m biased because I like a hard kicking slow full auto from the heavy buffer.
Not really. The lighter buffer reduces the time the bolt spends at the rear position and allows the the bolt to return to battery much faster. Since the trigger can only release the hammer when the bolt is forward, you can only pull the trigger as fast as the bolt cycles. If your trigger squeezes are much faster than the cycling speed, you would end up have a dead trigger because you are pulling midway through a cycle thus preventing the hammer from firing. Now the question would be, are people's fingers fast enough to warrant this upgrade. Maybe.. maybe not. But then again who doesn't like a snappier/faster cyclic rate?
It definitely is faster, you can see/hear the bolt cycling faster. But is this an upgrade to make? It depends on the person. If you like the sound, feel and faster semi speed, then do it. But if you’re satisfied with it as-is, then leave it. I really like this video because it helps make a better decision on what to do on increasing cycling rate.
Hey BadaBing great video. I love what you have done with the rate of fire. I would just be a little worried about the wear and tear factor in my own gun. You ever have any problems with nozzles breaking? Even with the aluminum ones I use they always seem to show signs of wear.
Hi! Thanks. To be honest the thought has never crossed my mind. The only nozzle issues I’ve ever had on GHKs, is with the AK series and those tabs that can get unevenly worn. Resulting in a misalignment. But nothing with the M4. There isn’t any increased recoil which would mash the nozzle to bits, just a crisper function.
While using the LW buffer , tm spring and co2 mag I thought I was hearing an hpa snap Edit : about that internal shrapnel, is it the buffer itself? Or the tube ??
im getting a GHK m4 for airsoft an training purposes, and this video just opened my eyes... thank you bada!
You’re welcome!
Enjoy.
BadaBingPictures do you know of any places to buy the tm AWS spring on own?
Well-produced video! Fantastic work! :D
Thanks bro! Glad you like.
Like the new red background
when we upgrade spring buffer heavy it will be hepl your gun save gas and faster right
i have questions, if i wanna save gas i need keep stock buffer and change buffer spring 150% or 200% right , right now i use heavy buffer angry gun but my gas go out too fast idk why , can you tell me what’s should i do for my gun best
Can you now do it with the Devilhunter mod and the angry gun kit for recoil testing?
Good video as always. I’ve had a few GHK’s but none of them can take the spotlight from the MWS personally.
Thanks! I agree, the MWS is tough to beat.
With this GHK set up in this configuration, it fires very much like the MWS. But with a touch more recoil and added metallic noise.
BadaBingPictures that magic TM hop though...
Haha. Oh yes!
The magic TM Hop!
Which one do you prefer, GHK M4 or TM MWS?
Can U make a video of also putting the washer and a short stroke kit cause idk how im suppose to put the washer and short stroke kit
Strip out all the buffer tube of components and then place the washers in first. (If required)
Then the spring and then the buffer.
@@BadaBingPictures so what I did was removed the buffer and the spring then I put one small short stroke then the washer ring then put back the spring and put a new buffer is that correct?
Those washers go closest to your shoulder, then the spring is in front of that and then the buffer.
Is that an actual AR buffer? looks just like my real one.
It’s an airsoft buffer made by GHK. It looks practically identical to the real buffer. Probably some material/weight difference though
William Seroyer It’s pretty much identical to a standard carbine buffer. I run a real buffer and it weights 3 ounces or 85 grams. The ghk actually weights 10 grams more.
I run a 3 oz buffer in my actual AR as well, I'm guessing your not using the carbine spring, I don't think a air soft rifle could cycle that.
The tokio marui buffer spring how much stiffer compared to the stock ghk? It is reliable to use with the LwBuffer?
I have bought the enhanced ghk buffer spring and It’s too much stiff to be used with the LW buffer..
it causes doubleshoots..
Now im using the LW buffer with the stock ghk buffer spring but after many magazine and the bolt gets dried out, it needs maintenance as it’s really weak to push the bolt back.. then the MARUI buffer spring should solve the issue i think
Drill out your existing buffer and drop a fat spring in it?
Anybody know if the v2 will fit a B.A.D. lever without modification?
Richard Mua Im pretty sure it will, but you may need to pad it out a bit as the ghk bolt release is a bit small
George.w the bolt release is the same size as a real ARs bolt release so it’s not gonna make a difference
Get one made in titanium if the alley one is flaking apart?
Since you made it shoot faster you should really make a video of making the ghk kick as hard as possible :)
Sure!
But if anything breaks, I’m blaming you 😉
Lets do it
How should I choose between TM colt license and GHK colt license and KWA LM4? Hope you can help me choose
Choose TM if you want performance above all else. GHK if you prefer realism and co2 compatibility.
KWA GBBR’s are not popular within the GBBR community. I trust their decision tbh
FG products are just awesome.
Beautiful rifle and nice video ;)
Thanks! 😁
Could you possibly do a video on how to install ranger plates onto the gmags
I don’t own any ranger plates, however if I pick some up I’ll do a guide for sure.
BadaBingPictures thanks
Hi badabing, I'd like to know if this kind of upgrade could damage or wear faster the nozzle once the bolt will clicle faster.
And I know you like to use propane, do you think that propane wear the internals faster than green gas?
Hi.
Propane is exactly the same as green gas. Although some brand green gas can be a little weaker than others.
The GHK M4 is able to be used with CO2 and if the nozzles are rated for CO2, using it with Propane/Green Gas will not effect wear the nozzle any quicker.
The higher cycle rate won’t wear out the nozzle quicker. The Lightweight buffer won’t create a heavy impact on the nozzle, so it’ll be fine.
On the fast FG buffer tube, bolt catch isnt work?
Try and unscrew your buffer tube one rotation. That should give it a bit more traveling distance for your bolt catch to activate.
you got another link for the FG-Airsoft Lightweight Speed Buffer ? Link you posted doesnt seem right or even working.
Nope. Sorry bud.
FG airsoft has closed down now, so that’s why the link isn’t working I guess.
Try google searching, you may find one left in stock somewhere.
@@BadaBingPictures yeah i tried seems tough to find
I’m considering buying this rifle as a training rifle, but I’m worried the heavy recoil mod won’t be enough to make me feel that umf. What would you advise?
You could try an aftermarket steel buffer/heavy recoil buffer and stiff buffer spring.
There are aftermarket bolt carriers available, but they aren’t that much heavier than the stock BC to be of any significant difference.
how do you guys think it’ll be with the aluminum bolt as well?
I've noticed you don't seem to do many WE GBB's do you stay well away from them or just haven't had your hands on them?
I don’t avoid them at all, although the pistols I can take them or leave them.
As you say, I just haven’t got my hands on them.
I’ve had experience with their G36, MP7, MP5, M4/M16/416 and Scar L GBBs.
Really looking forward to their G3 GBB.
BadaBingPictures, you and me both with their G3. It’s my favorite modern rifle. The real steel’s bolt is a huge chunk of heavy metal. I hope the WE G3 isn’t plagued with issues from struggling to cycle the bolt. We will see though :D
Bada like the systema PTW is fairly similar weight to the real M4 how does the gas compare? Light or similar weight to that of a PTW
It’s roughly the same weight. Perhaps a little lighter than the unloaded weight of a Colt M4 Carbine.
I own a WE M16 and I also own a real steel Palmetto Arms AR-15. It looks exactly like the military M16, but it shoots semi only. Anyway, the gas WE M16 was maybe 1lb less than the real steel. But it’s hard to notice the difference in weight when in your hands.
What lower (or full receiver kit) is that? It looks amazing as a replacement for the icky SEAL trades.
This is the Colt trademarked GHK M4 Version 2. It’s GHK’s Gen 2 M4 with a few internal improvements and it is licensed by Cybergun.
Far better than those ghastly Seal trades! 🤮
I have a king arms licensed colt m4. I'm told its a "wa" style. Do you think these will fit in mine?
If it’s WA compatible then yes. Although there’s only one way to find out for sure.
Trouble is FG Airsoft isn’t around anymore. So I doubt you can find these now.
Good stuff. Ever thought about picking up the samoon heavy recoil kit/buffer spring since vipertechs are so hard to find?
Thanks.
I haven’t no. I had the VT spring but it was quite thirsty in gas. I don’t really go for whole heavy recoil thing.
BadaBingPictures
I just like to have a bit stiffer return and less clunky travel is all.
can i install madbull dd 9.5 inch rail?
That's what I was planning on doing, but I've heard somthing about you need to reverse the threads, I'm not sure tho
ZRock7771 just buy a milspec rail from brownells
Where can I buy this gun?
You have such nice video, bro, and I just got my own ghk M4 V2. I saw the original buffer have a piece heavy metal cylinder, I just move the pin out and moved the heavy parts, than the buffer feels more lighter. I am not sure is that a new version buffer, but that make me feel good, cause ghk seems give us more choice.
Hello Badabing, I am going to get a GHK m4v2, also the Colt engraved one... But i cant decide between the 12.5" or 14.5"... do you have any words of advice for me? It would be really appreciated.
Hiya.
They’d be both the same, just different length barrel sets, one is no better than the other. Although the 12 is a less popular choice. People usually go either 10.5 or 14.5, so you’d be one of the few.
If you play in close quarters a lot then the 12.5 would be slightly easier to handle around corners and stuff.
Also the inner barrels would be different in length and they would probably produce different FPS readings. On gas guns the longer the inner barrel the higher the FPS tends to be. What FPS did you have in mind?
in terms of accuracy will there be a difference? Presumably if I was going to be primarily CQB the shorter is better... But as I would be mostly at Ground Zero (south of
England) which is woodland, the need for a 10.5 is negated. But I figured that the 12.5 would be a good all rounder, particularly if there is no real difference in accuracy due to shorter barrel compared to the 14.5?
Oh, excuse me, I didnt expand your comment so i only saw the displayed first paragraph. the FPS rules at ground zero are 350
You might find that the accuracy is no different. The 14.5 using a 1j nozzle gave me around 340 - 350 during the winter, but this summer it shot up to 400 or over. So I would recommend the low velocity nozzle instead and would keep it sub 350 all year round.
I run the VFC buffer which is very similar to the FG one coupled with the stiffer spring from Samoons. Snapiness is great, plus recoil feels different, more clunky 🙃
Slow fire rate? How could i make it fire slower? I want the most gass effecant realistic airsoft gun.
To be honest it’s quite gas efficient as it is. To make it slower you can use a heavier buffer/real AR buffer. This will help take away any bolt bounce and improve its feed.
@@BadaBingPictures You're one of the best for interaction.
Have you consitered makeing a FAQ page for gbbr's?
lightend buffer spring? would it make it even more effecant?
I'm trying to make a gbbr as a real steel dry fire training aid.
Recoil and fire rate are things im willing to sacrifice to get range and accuracy.
.4 bb's, rHop, Co2 is what the grape vine has sugested to be best.
Thanks. It’s nice to maintain contact with the community.
I haven’t, no. Mainly because there’s tonnes of sites with informative resources online. Especially with places like Discord, lots of people contribute on there and many of them have higher understanding of these things than I do.
GBBR Heavy Recoil Club being one of the main servers.
discordapp.com/invite/h6h7mBp
The stock GHK buffer spring is quite soft as it is. You could look into a lighter BCG. Check out YSC design & development Co.
They produce aluminium bolt carriers that won’t produce much recoil, but should extend the efficiency more than the original.
Can you link the p mag?
bro, do you still use this ghk m4 to this day? Was it damaged during use?
I still own this rifle. I haven't had any issues at all. It works perfectly.
@@BadaBingPictures Thank you, it's great
Hey so is this worth to get? Do you still have this in your GHK? Or use the stock buffer still?
Hi bud!
If you can find one, buy one. If you don't mind the reduced recoil sensation but crisper shots, this might be what you're looking for.
FG Airsoft isn't around anymore unfortunately. He's decided to move onto other things.
BadaBingPictures ahhh ok thanks bro for the heads up.
*Predator Macs voice* "Anytime"
;-)
Hey! Quick question how would I go about cleaning my GHK M4? And more specifically what oil do I use? Also I would highly recommend making a video on this considering a lot of your fan base owns GHK’s
Thanks!
Hiya.
It’s nothing scientific. Just use paper towel/rag on the BCG, inside upper/charging handle and clearing away grit and dirt from the lower. Using Q-Tips/Cotton wool on a stick to attack hard to reach areas.
I back up some of the paper towel/kitchen roll inside the buffer tube to get any other dirt that’s deposited in there.
Remove nozzle from BC and ensure it is free from dirt on the o-ring base. Then apply silicone oil to those rubber o-rings.
I use GHK Silicone oil and lightly coat the BCG and maybe a drop on the hammer/striker.
Reinstall and function check.
With the inner barrel, I send a couple of small patches of tissue on an Airsoft cleaning rod, through the barrel. I turn off the hop up to prevent damage and in case of grease and grime, I may put a dab of cleaning alcohol on the patch and push it through. Ensuring I don’t ride over the rubber bucking.
Repeating with dry patches until a fine sheen.
Everybody’s different and we all have our own “standards”. Mine is a very casual approach to maintenance.
Thanks for the suggestion, I may look at doing a vid on this subject.
Would these upgrade be recommended on the hk416a5?
I tried it in the A5 when I owned it and it was super fast!
So yes, if you prefer a speedy setup then this is the choice for you!
BadaBingPictures awesome thanks brother! Did it wear any of the internals down faster?
BadaBingPictures i saw a few of your vids with the a5 so im thinking about combining it together
I briefly tested the buffer within the A5 so I wouldn’t know about it’s long term effects. As it’s lighter than the original, I’d think it would be easier on the internals. Faster yes, but less stress as the bolt carrier moves easier.
That’s my take on it anyway.
BadaBingPictures okay thank you
What type of mags are you using
GHK Green gas GMAG’s and stanag
The performance upgrade is tremendous. But all you need to do is get a stronger bolt.
Hi BadaBing, can I PM you for some questions regarding the GHK AKM?
Hey.
Sure. Best way would be through my Facebook page, and I’ll see if I know the answer to your AK questions.
Hi, I want to upgrade my GHK M4A1 with a 'PTS Raptor Ambidextrous Charging Handle', do you know if other brands fit too, for example Western Arms? Because on Samoon the normal one is out of stock for a long time already.
BestFavorite there should be a ghk option
Would the fg buffer and tm m4 recoil spring work on a we m4?
Yes. I don’t see why not. The FG buffer is compatible with the WE M4. The WE recoil spring should be sufficient.
The TM recoil spring isn’t heavy/stiff.
Can this fit a LVOA rail?
I have seen guys use them on their GHK’s, so yes.
Check out the GHK Samoon GBB Facebook for photos and guides. 👍
Does it fit the vfc 416?
Yes.
good vid mate, I run co2, do you know or have you tried that?
Thanks, yes I have a CO2 magazine that I’ve used for testing but I primarily use propane as I have a tank that I refill the smaller cans with. Super cheap!
getting a ghk instead of a tm mws
I have a question for anyone who has the answer; is the GHK M4 the same size, 1:1, as the real steel?
Anton H, yes. A GBBR is even more correct and to scale with everything (especially the pistol grip).
Hey, what's the deal? I'm subscribed and hit the notification bell but wasn't notified of this video!
Hiya
This has happened to me on some channels that I’m also subscribed and notified to. I think it’s one of YT’s little bugs. Damn annoying!
Hey thanks for the vids ! Have you ever tried FG Airsoft Heavy Speed Buffer ? It increases the ROF, cyclic speed and recoil they say, I'd like to know if it's real :D
I honestly feel like this makes no impact on semi auto firing. Even with the stock buffer and spring the rifle cycles faster than you can pull the trigger. The limiting factor when it comes to semi auto rate of fire is your finger and the quality of the trigger itself. (Unless you’re Jerry Miculek 😉)
But maybe I’m biased because I like a hard kicking slow full auto from the heavy buffer.
Not really. The lighter buffer reduces the time the bolt spends at the rear position and allows the the bolt to return to battery much faster. Since the trigger can only release the hammer when the bolt is forward, you can only pull the trigger as fast as the bolt cycles. If your trigger squeezes are much faster than the cycling speed, you would end up have a dead trigger because you are pulling midway through a cycle thus preventing the hammer from firing. Now the question would be, are people's fingers fast enough to warrant this upgrade. Maybe.. maybe not. But then again who doesn't like a snappier/faster cyclic rate?
It definitely is faster, you can see/hear the bolt cycling faster. But is this an upgrade to make? It depends on the person. If you like the sound, feel and faster semi speed, then do it. But if you’re satisfied with it as-is, then leave it.
I really like this video because it helps make a better decision on what to do on increasing cycling rate.
Hey BadaBing great video. I love what you have done with the rate of fire. I would just be a little worried about the wear and tear factor in my own gun. You ever have any problems with nozzles breaking? Even with the aluminum ones I use they always seem to show signs of wear.
Hi!
Thanks. To be honest the thought has never crossed my mind. The only nozzle issues I’ve ever had on GHKs, is with the AK series and those tabs that can get unevenly worn.
Resulting in a misalignment.
But nothing with the M4. There isn’t any increased recoil which would mash the nozzle to bits, just a crisper function.
While using the LW buffer , tm spring and co2 mag I thought I was hearing an hpa snap
Edit : about that internal shrapnel, is it the buffer itself? Or the tube ??
Sadly FG Airsoft is no more.
So where can I buy this buffer ?
Sadly the company producing it no longer exists