Homemade Router Plane - Scrapwood Challenge ep25
Вставка
- Опубліковано 29 вер 2024
- My Premier Project Plans: paskmakes.com/...
Plans for this project here: paskmakes.com/...
I seem to be on a roll making tools at the moment and here's another one for the collection! :)
As always I'm happy to answer any questions.
If you would like to support this channel you can do so here
/ paskmakes
You can also help me out by purchasing one of my shirts, you can find them here paskmakes.thre...
Check out my new website
paskmakes.com/
Check out my Instagram to see more of my work / paskmakes
Also you can check out my photography at my website (nothing to do with making but you may be interested in what I do) www.neilpaskinp...
My email can be found in the about section of this channel or you can reach me through my website.
For real mail,
Pask Makes
P.O BOX 768
Yandina
Queensland
4561
Australia
I seem to be on a roll making tools at the moment and here's another one for the collection! :)
A guide with the template and measurements can be downloaded here paskmakes.com/plans/
hell of a job but good done , watch my videos
do you sell any of the things u make
The knurling method takes the cake. How in the world did you come up with that one? It's pure genius.
Help me! Please
A router plane is a timeless tool. Nicely done!
That thumb screw turned out great. Neat idea on the knurling.
Japanese Saw File
Thank you Neil for making this one. I've been waiting/hoping for you to make one and see your approach to it... !!!
Once again thanks mate, excellent work !!!
Thanks very much Stelios! :)
@@PaskMakes pe heeenngin rc
@@PaskMakes ergo pecheboddemer
I’ve got a Stanley router plane and love it... but I’ll definitely be making one of your versions as well... I think that’s the best ‘home made’ design I’ve seen 👍🏻
That method of adding knurling is genius!!
Thanks Neil, I enjoyed this video. What a neat little tool, I hope we see you use the new one you are going to make in a future video. Thanks again.
Great job dude and that stop motion is great. You seem to enjoy the project and the making of this video. Keep it up man.
love that dog Thanks for the video ... great teaching ! glad to see the Ol' pig back
No worries Glenn - it was good to use Fergus again! :)
Love your work and got a kick out of your knurling technique! Can't wait to try it sometime.
Man I love that nurling trick. Very cool mate
Not trying to sound like Mr. hindsight, but if you ever make another one, You should try a nutsert or a Rivnut for your set screw. Prob a bit more durable in the long run. Keep up the good work!
Fergus the forge piggy ..... dear god that's too cute for words.
And watching you take "junk" and turn it into so many gorgeous things? The reason I subbed (at first) to be honest. Though now, I'm going on a binge of all your projects lol
the theme song is awesome
and that dog chillin on the concrete
Very interesting tool you made. I have never seen anything like it.
love the dogs guest appearances
I was given one of these when I was an apprentice 45 years ago and it was an antique then,a very useful tool, another name for it is "old woman's tooth "
This challenge has become a bit predictable.. You start with scrap and end up with something beautiful and useful.
Don't change a thing.
I'm really good at starting off with beautiful wood and ending up with scrap :D
Gnome Party send it to to Neil
Haha - glad you're enjoying it Mike! :)
Just record your youtube videos backwards.
How have threads held up? Any reason NOT to use an insert? BTW...beautiful work!
Very nice. I like it. Thank you.
Actually, I happen to like the wide hole as it allows for a better view of the piece in work. A compromise would seem to keep the wide opening in front but reduce the back. It could have the shape of a half-circle with a protrusion into the opened half around the center where the blade needs support most.
Have a nice day! :)
Absolutely Brilliant!
Awesome informational educational video experience Y'alls
Well done and pretty. 😊
I don't think it's a big hole, that's how the work area can be seen, if you want to strengthen it you can add a thick piece of metal in the chisel width very beutifol design👍
you are really impressive ! and your plans ! i'll take some of them when i will need it. thanks a lot for your video. i just have discovered you today.
Nice, putting this on my to do list.
secretly i come here for the dogs and coincidentally i walk away with immense knowledge on how to woodworl
11:25 😮😮😮😮 that's the most clever thing I've ever seen!!!
Very cool router plane.
my respect to master
As always great video!
What did you use to clean the sandpaper disk?
nice job and practical too. I need to make one myself. thanks Mate
Woodworkers are awesome.
This is design!
best of best 5/5
Great! What kind of wood is that? Love the ca glue for wood threads and the knurling technique. Thanks from the US.
Thanks Jeff! It's camphor laurel! :)
Mind blowing
You can use a microwave to unglue the hot melt glue
incredible idea..👍👍👍
Where did you get that rasp with the diamond cut outs
Also love watching the videos. Gives me great ideas for what I can do.
Nice job friend.... Compliments
Nice job!😄👻
unique design ,
If one was to use a bit of CA glue on the threads, its makes them a lot stronger and last longer. A cheap way of doing things
Awesome
Beau travail félicitations :)
could you make some small coin dishes out of those wood scraps with chisels and a plane? i would love to see it!
Legend!! 'nuff said!
As I can see the caliper route, it floods me with blood.
You are a fucking genius. Knurling that bolt....
The only people that dislike this are the people that probably asked why you didn't just just use an electric router
Is this an original design?
I've never seen a router like this before, usually all I see on UA-cam are copies of off the shelf ones, your's simpler to make and use
At 7:46 you put something on the disc sander, what was it and what was it for? I don't have any mechanical sanders at the moment but will be looking to get one soon, and I've not seen something like that being done before on any videos I've watched so far
I believe he was just cleaning it
I think you'll appreciate this! ua-cam.com/video/d2ABs3VokH4/v-deo.html
You can use a old boot or shoe sole,the Vibram soles from work boots work the best.
Hi, what do you use to clean you disk sander (video time 7:46)? Thanks in advance
What kind of paste did you use to seal the wood? Sub’d! Cheers mate!
There is way too much stuff on UA-cam that says 'Wow! look what a smart arse I am" and mostly by people who's only understanding is that wooden tools can be polished up nice and shiny but the W.t.f. is the point of a router that can't be accurately guided?
Why can't it be accurately guided? Don't know what you are talking about. :)
What wood did you use for this project
Hey what do you take 7:47 to clean your sandpaper? Greetings from Germany =)
Пилить не японской пилой,это уже моветон))))
What kind of wood do you use?
nice
At 5:15 you really could have used a router plane ;)
8:23 "And I'm just gonna eyeball it, and do what I think looks about right" So happy to hear this after so many other UA-camrs are like "well my cross cut jig is only .05 degrees off over a 24" run, but we can do better, we just need this [$74293842 tool] to dial it in".
Earned a sub with that right there. Also, striking a line off just using your finger @ 4:11 Love it! Real, down-to-earth woodworking!
I'm sure when you brought the load of scrap wood home you didnt know that you would be inspiring woodworkers from all corners of the world but you surely have. Thanks for another great video. I hope the scrap wood pile never runs out.
I know, it’s crazy and never thought I’d get the response I have! Thank you! 😊
Great tip for strengthening the wooden threads with Superglue. Man, your brain never stops working.
Cheers, Frank.
love the way you make your knurled nobs
Thanks John! I like them too, they're not perfect but they have character! ;)
Same here.
@@PaskMakes Last time I saw you do that, I got to thinking about a jig to help with file knurling, and this reminded me again. Make a dedicated clamp with 3 bearings that would press the knob against the file. Two bearings behind the knob and one bearing behind the file where it contacts the knob. Press them together with this clamp, then use a bar clamp to slowly push the file through. It will roll on the bearing and the knob will rotate in its pocket with two bearings behind it. Maybe have a backer behind the file as well. And we get to watch a video of you making this clamp/jig! :) (Just an idea-- Love your videos!)
That's a great idea! I like it and may just have a go at something like that! Thanks very much! :)
@@PaskMakes I'm glad you like it, and I'll keep my fingers crossed that it makes it into a video!
I have a playlist for everything I dream to make and have in my workshop when im older. Your videos are a majority of whats in there xD
So much scrap wood, so little time
Take care holding a hacksaw like that, I used to do that until one day the blade snapped and it caused a really nasty injury. Don't want you out of action again lol.
Discovered your channel a few days ago and it is quickly becoming one of my favorites!
Glad you enjoy it!😊
I can think of two things to stiffen up the blade so it doesn't chatter. First would be to make the groove a bit lower in the body so it doesn't have to stick out so far just to get down to level. You're sort of going to do that with the modified opening so more of the blade is supported. But that's going to make the hole pretty small and harder to view what is happening. Next up might be to make the dado for the blade twice as deep and epoxy in a second non moving blade that extends out and down to just shy of level with the sole. This would aid the stiffness of the blade by extending the support and hopefully again reduce the chatter. A very slight arc bent into the moving cutter blade would also focus the bed pressure at the ends of the blade too.
I'm liking these ideas and I need a larger size router plane of my own. I think I'll have to have a go at a similar design but with these changes
Thanks for the good tips Bruce! I did think about lowering the blade but then there will be less of it in the plane body. That may still be ok but I kept the overall size of the tool compact and felt I left the thickness of the body about right. 😊
Nice design, I like it ;-)
every time i get a notification when you upload i think, YES!!! Another video! i always enjoy your work. Keep making videos man!
Hi Neil, the scrapwood challenge is meanwhile my weekly must-watch ;-)I hope you never run out of scrapwood
That's great to hear Tim - glad you're enjoying it mate! :)
I can't watch all of this right now. My valentine's date is staring at me.... I will be back after our dinner date is over! Looking great so far!
You make it seem easy what a master's work really is. Congratulations!!! 👌👍
Hi its Neil I watched this router scrap challenge and noted you dragged your plane on its side (edge) what is that for or what does it do?
Scrap wood challenge... over the next 7 days I'm going to make stuff out of scrap wood... 25 episodes later. Keep up the good work.
Do pink nylon ladies bloomers (0:50) work well to get glue cleaned up? Haha
Very nice Router and glad you mentioned the blade chatter.
Do you like the diamond sharpening blocks better than stone or sandpaper? Do they hollow out after use?
Thanks for another great build and video!!!
The pink cloth is j-cloth, I have a big roll of it and very handy in the workshop. I like the diamond stone, it works for my sharpening needs. They don’t hollow out but they do eventually wear out. 😊
That exciting moment when you wake up to another Scrapwood Challenge - Best way to start a Friday morning :-)
Why the handsaw rather than the bandsaw when you cut the block at 4:18 ? Blade drift? Or is a handsaw less fiddly ? Or just because that's how it worked out? =D
It turned out a beauty. Camphor laurel really has some nice grain!
It just seemed like the best and most accurate way at the time - I don't think I put too much thought into it though.Thanks! :)
Hi pask
Quick question, what did you use at around 7:50 to clean your sanding disk?
Thanks :-)
Disc sander cleaning block! Try ebay. Basically a big rubber eraser.
@@kickyourmum many thanks!
Thank you, sir. Most sincerely.
Awesome craftsmanship, as always. And the final piece, as usual, not only a functional tool, but a piece of art. And congratulations not only for the craft skills, but also for the presentation. I don't know where to begin the praise. Great, smart editing. All the details shown, without superfluous talk about the obvious details, which would just sidetrack from the important parts.
Also, I really, really liked how the four legged pal contemplated about the important matters of life at the same moment as you contemplated about which piece of wood to choose in the beginning of the process. True camaraderie.
One more thing. Gee, what a sharp chisel, at ~8:30! And curved one, at that. Just a slight tap with the soft pad of your palm, and it works like a charm.
Thanks again, for sharing the knowledge and your passion with us.
Wish you all the best. And keep up the good work!
Thanks very much - glad you enjoyed it! :)
Hey Pask! Big fan of your channel! You should make a jointing plane and other tools, so you can make scrap wood projects WITH scrap wood projects!
Thanks very much Richard! I like the idea of a jointing plane and have thought about it, it’s on the list! 😊
Fantastic, just as all of your other videos! Love it when you make...well, anything! I learn loads, as you might say. Thanks, Neil!
Thanks very much Bruce - Great to hear you enjoy the videos and get something out of them! 😊
I've just recently stumbled on your channel and subscribed (and clicked the bell) part way through the first video I saw! Since then, I think I've probably watched all of your other videos. They're great, Pask. Thank you for making them...I'm learning TONS from you! :)
Good Video, interesting and nice tool.
This is another version of the sort of thing I/we used to make as young apprentices starting out in the big wide world of cheap tools, we used to call this one a grannies tooth, also ideal for bottomming out half laps. We used to make similar ones too that held firmer chisels of all sizes. A very simple one was a countersunk wood screw with the underside of the head hones to a sharp edge, a quick simple get you out of a hole(excuse the pun) for one off jobs.
How is it, you always know what to do to make me jealous as F?
Shouldn't you bury that poor dead Terrier laying on the ground? :-)
Great video. Thank you for giving pros and cons for different steps in all your videos, that is greatly appreciated.
Finally! You are the first person on UA-cam that drilled and tapped wood and used ca for strengthening the threads. I learned that when building R/C airplanes.
A really good way to separate hot glued items is to put a few drops of denatured alcohol on the joint, right where the hot glue is - comes apart like magic. Even if the joint is so tight that it seems like there's no place for the alcohol to get in. Just drip some alcohol on it, wait 10-20 seconds, and it will come right apart. No chance of damaging your work while prying at it.
Hi Neil! Your design is awesome, thank you so much for sharing this! I'd like to try my hand at making a router soon. I've never used one, so it will be an adventure! I noticed you put the cutter in bevel-down. Do you notice a difference in performance when you place the blade in that way?
Very cool tool turned out. Thank. I always watch your videos with pleasure and smile. Good luck.
I really like the larger opening. Do you think adding a perpendicular support under the blade would be enough, or does it need support on all sides? It would be cool if you could add a straight piece of metal underneath (maybe copper would look nice) and still have the larger opening.
So cool Neil! You make such functional and beautiful tools that are asked to be used! Cheers mate!
Thanks very much mate - I'm very happy you think so! :)
Hello, you're definitively a nice inventive guy : this serie is one of the best ever seen on wood working. I wish you all the scrapwood you need for ever😉👌👍🖖
Brilliant. Wish I had not bought a Stanley one of Ebay now. Cost an arm and leg. 😭
Hello my Friends (Pask Makes) You're on my list of favorites and inspirations, but I do not know your real name, can you tell me?
Thanks very much Alexander - it’s Neil! 😊
@@PaskMakes So who's Pask, and what did you do to him!? :)
So... We gonna talk about the demon voices in your intro?
No?
Okay then. On with the show.
Hahaha, that's right, that was creepy.
I’m sure you’ve been asked this and I’m sure I heard you answer it a few times before but do you know what type of wood all those scraps are? Because the wood is gorgeous. And what you make from those scraps it’s just incredible. I admire your work.
Great video. To reduce chatter, I would lower the blade in the body of the plane. There is plenty of room to lower it without compromising the rigidity of the blade.