Trying to Break the Off-road Go Kart!
Вставка
- Опубліковано 21 сер 2024
- In this video we hoon the offroad go kart to see if it breaks! The reason we are doing this is to be sure that it is completely solid and functioning as a go cart before we strip it down and paint it. Previously before driving this we gave it a brand new Predator 212 motor, mud terrain tires with v-treads, auxbeam led lights, as well as a battery and some go power sports performance products. This thing does really well in the water and mud so be sure to stay tuned to see this thing in the future!
*Be sure to check your local laws before driving any non-registered motorized vehicle. Do not attempt these activities at home. All content produced by Build Break Repeat is for entertainment purposes only.*
MUSIC-MUSIC - If you liked the music in this video be sure to check out my buddies Soundcloud! / 2618a
PARTS-
Exhaust and Air Filter -www.gopowerspor...
Tires Front-www.gopowerspor...
Tires Rear-www.gopowerspor...
Motor Kit - www.gopowerspor...
Engine Mount Plate - www.gopowerspor...
Battery- www.gopowerspor...
Thanks for watching and be sure to subscribe!
That freakin truck on bags is sick as hell. Love the channel keep it up
My highlight as well lol!
once i saw the truck i was like yuppp SUBSCRIBED! lol
That truck is bad ass!
O ya
Yay i kinda was expecting an OFF-roading episode on the OFF-road go kart
Gonna need a snorkel kit and converter cover to keep the belt dry so it don't slip alot and change to a lower gearing and it will do just fine
I’d like to see you guys build a dragster to compete with Carsonandcameras! 😎😂👀👏👍
I no
Spray some tack spray on your belt will keep it gripping in water. Kinda like rubber cement spray but much much thinner and water proof
That truck is so convenient
It just the gear rasio and no torque converter cover
Came for the kart. Stayed for the c10.
Not sure if its fast enough to really send it, but it was cool! (really possible the belt was slipping from being wet or the torque converter clutch needs different springs or something seems to really sound like a lot of slipping somewhere)...
its get wet because they not install the cover of the conveter
Wow that thing is slow! But that c10 is sweeeet
Steve'sSpee
F***off
Too slow and low...
Get a bigger sproket on the axle too much acceleration not enough room for the toqure converter to actually work
Dang that thing is slow as heck but both the trucks nd the Jeep were nice 👍🏼
Change TAV red spring for a Yellow Comet spring. Use the tightest hole when you put it back together. It will climb hills better.
Add a cover to your torque converter keep er dry good to go
10 seconds in and already love this vid
That c10 is so dope.
Seems like it could use some gearing to the torque side
Love the truck but not a fan on the airbags
your vids are sweet man keep it up and ill keep watchin!!
Fix the toork converter and really good video can’t wait to see the 420 go through it it would do it 😂 good luck with the cold weather and stay safe😁😄😀
Corey Reynolds toork
Put the air filter up higher because you don’t want to get water into your engine
Love your channel you will be big one day
Danny Bath thx bro
Awesome
You guy are the Best
keep the videos coming drive though water more often lol
def should have installed the torque converter cover.. u got that belt so wet it doesnt wanna do anything....
looked fun getting that wiplash though
I had one of those drive clutches come off and the weights flew apart right under my leg. It blew the cover right off of it and they still flew 20 feet. It was violent. Luckily nothing hit me they are dangerous. I never run without a cover. Plus as you could tell they dont like to get wet
can we see a crawler kart build
sick xj man
You can't get the torque converter wet it will slip really badly
It sounds like it has more bark than bite...LOL...
Hahahaaha
go kart approved rope 😂😂😂
If the belt gets wet it’ll slip if your gonna off road it put a clutch on it so the water doesn’t effect it
I have that same go kart with a 420cc and it’s Awsome!!!
This is what I wanna see!!!
Thumbs up for the c10
Cute truck
u guys should just do a race cart like full send kart
Lift the motor up higher to keep the belts try. Run a chain & sprocket from what is currently your driveshaft to a new one. Massive sprocket. No speed, but it will crawl for days
Haha it’s funny that you said I can hear the Valve Leaking it’s ok we’ll replace the tire
badass c10
If you’re just gonna break I️t give I️t to me instead
Mat The dipper good idea
No me
no kidding
Take the governor out of the motor will be faster a little and get rid of the dumb torque converter and get a disk clutch way better and won't slip
It would of done better if the belt had a cover to keep it dry
You rock
Wish I knew what kind of kart this is. I have this identical one waiting for my 16 hp duromax to come in.But there are no markings of I'd on it left. Would love to know what kind of kart I actually have lol.
It's a fire fox 620
How many go karts do you guys have theirs so many I can't count
Thats a sick fucking bagged truck u got there
I have an idea instead of trying to break it you can give this to the people who can't get it. like me I've been trying to get one for the longest but they get really expensive.
Nobody is just going to give you a go kart you have to earn it and work for it like everyone else
Nice ass truck
I like your car
Can someone post how to install throttle cable
sup guys you should look into a 301cc preadator it would be alotmore faster?
Seems very underpowered
Not underpowered, the gearing is just really low.
Torque converter doesn't like the water why would u drive it through there
Woww nice job👍👍👍
Please my dad never wants to help me he alway s getting drunk
belt is slipping. tires weren't spinning most of the time. blue smoke at the 6 minute mark.
What a shame that you would take that TOMBERLIN and destroy it.
Hey B.B.R. i just got one of these tomberlin firefox carts too
The video is in my channel
Belts dont like water or mud. Yank that garbage converter off and straight chain it with a metal converter for chain
Is that home made or did you buy it online and put stuff onto it
Your tire was low in last video aswell :D
There is no torque converter
Put a 670cc on the gokart
What are those and that c10 tho 👌
tordue converter can't wet it will slip bad
wildcat2488 I no he should have a cover on it
Hi
Which is faster a predator 212cc or lifan 110cc
Honestly that go kart looks like a Jeep the way the roll cage is made
Like if u agree
Water on the belt
Needs more power. Too slow
Should I get a go kart for my 115 acres? Because id love to have one but I want it to make it if I'm paying so much for it
Talentless Cult making a high quality one can cost a lot too. My advice is find a frame for 50-100 dollars and build it from there
What is the go-kart called
How much is it and where can I find it?
You might need a 670cc
But things aren't even torquey doesnt even has any power what is that like a freaking five horse
How many cc does it have
That thing has no power at all
Torque converter belts and water don't mix well.
Put a 420 on it
They try to break there go kart while mine breaks after air molecules touch it to hard
I want those tires
Why would you want to break the m
lol 5mph top speed before wet
Yx 140 engine swap
Your axle is bent
Has a winch on his jeep ties a rope and pulls it out using the engine instead
You obviously have never owned a winch. Either that or you don't properly wrap the cable back up every time after you use the winch. If you take care of your winch so it will work when you REALLY need it, you will wrap it back up perfectly every time. Plus you have to clean the cable out to keep it in good shape. It is much easier for a lightweight vehicle like this to just use a small tow strap, which if he truly offroads he should have had one instead of that tiny rope. I have a 12k winch, but I mainly use my 10 Ton tow straps to pull out trucks and SUVs, but I have a 5,000 lb smaller strap with hooks on the end to hook on to small cars and cross overs that do not have tow points. Only time the winch comes out is if I am stuck or someone else is stuck REALLY BAD.
Cool,but that's slow as hell lol
That truck is so rat rod
2:37
A really big frame not fakr
How much did you pay for that
80th like !!!
Rotary lol
Its not slow he did that because he wanted to i have one its faster then 10000 moter dirt bike
Дай схему каркаса
Lol get a gopowersports.com torque converter thats what these videos are telling me lol cheap or any ebay torque converters are trash....
Buy a boat