U54, lol. Never let the machine think. Great example and we'll explained. You set your machine similar. I can measure the length of incomplete thread on the tap and adjust as needed. I laugh only because the machine doesn't have eyes to see it. Excellent videos, hope you continue making more.
Great videos. I run the exact machine that you have. I can't tap on center for whatever reason. I have to use a live tap and holder and program it to tap on center. I have had mazak techs look at it and no one seems to be able to figure it out. I'm thinking it must have something to do with parameters. Maybe you know. Thanks in advance.
Hello Phil, I run the same T3 Quick turn as you do and for some reason we can't tap on center with a static holder. It seems that the speed and feed doesn't sync. I always have to tap on center using a live holder with a radius of zero. Was wondering if you had any suggestions. Thank you in Advance.
Yes, I thought perhaps it was a parameter setting. I've tried about everything else. We got the machine used many years ago and no one could ever get it to tap correctly.
My machine only has 1 speed or gear. It is not necessary to tell the machine a gear number unless you are making a manual process. Your English is fine.
U54, lol. Never let the machine think. Great example and we'll explained. You set your machine similar. I can measure the length of incomplete thread on the tap and adjust as needed. I laugh only because the machine doesn't have eyes to see it.
Excellent videos, hope you continue making more.
Thanks.
thank you sir,I'm really happy to see you back,this video really helpful,happy Father's day .
Thank you very much.
Nice work Phil.
Good to see another video from you too.
Peter.
Thanks 👍
Thanks great video & the parameter tip ,much appreciated.
Would you be be to do a knurling video please ?
Yeah, I could do a knurling video. Thanks for watching.
thank you again. very helpful. i don't know about U54.
You're welcome.
If you do many threads you can save time with the manuel programming, double the speed when you retract, or tripple it.
great video, can you maybe do a video about tailstock work?
and about what chuck pressure to use?
Sure, I can do that.
Didn't know about that parameter... Maybe the cause of some broken taps in the past 🤣
Great videos. I run the exact machine that you have. I can't tap on center for whatever reason. I have to use a live tap and holder and program it to tap on center. I have had mazak techs look at it and no one seems to be able to figure it out. I'm thinking it must have something to do with parameters. Maybe you know. Thanks in advance.
I have not come across a problem with tapping with the main spindle other than needing a floating holder.
What does the exchange point of tool mean? Why #1?
Remember to set it as either ridgid or floating tap, depanding on your toolholder.
This old machine does not have rigid tapping capabilities.
@@mazatroltipsandtricks6816
Are you sure there is not a RIDGID and FLOATING option in the settings?
@@allancnc This T3 control does not have rigid tapping. Too old.
Hello Phil, I run the same T3 Quick turn as you do and for some reason we can't tap on center with a static holder. It seems that the speed and feed doesn't sync. I always have to tap on center using a live holder with a radius of zero. Was wondering if you had any suggestions. Thank you in Advance.
Are you sure you are programming the tap feedrate correctly? I am not sure what else it would be.
Yes, I thought perhaps it was a parameter setting. I've tried about everything else. We got the machine used many years ago and no one could ever get it to tap correctly.
Can you demo tool setups
Have you seen my earlier videos on setting up the tools?
I still have drilling problems
That keep data errors
I have mazatrol T32-2 control and how to change language French to English I know just parameter K 1 to 48 ( 0 or 1)
I do not know how to change the language of the control.
Sir,sorry because my english so bad,but I have a questison,my machine same this one,I cannot change gear from 0 to 1,please help me
My machine only has 1 speed or gear. It is not necessary to tell the machine a gear number unless you are making a manual process. Your English is fine.
@@mazatroltipsandtricks6816 Thank you so much,sir.your video help me so so much.have a good day
@@binhnguyenthai2435 You're welcome.
Hello
Sir is it possible ... ??to do tapping operation pecking like drill...
Not on my old machine. I will have to check to see if the new machine can do that.