I have an 05 Rumble Bee 5.7 with a Borla and I centered the tip with the gap the same all around. That's kinda what the cut out is for. It's just one pipe out the left side but it does have the cutout too. Funny... I changed every light to LED also, except the licence plate, that's the last one. Looks good bro! Cool video!
I have the same tips for my truck. love the look but I live in Canada so having the back side of them wide open makes for a nice spot for dirt and crap to get packed in and probably rot eventually
If i had to guess, I think it would make the sound a tiny bit deeper due to it being about another 3 inches longer and 1 inch larger in diameter. I have the Hemi engine in my 4th gen ram 1500. I would love to try these out. $231 for some tips does sound a bit pricey though. $150 wouldve been more reasonable IMO.
@@webberfan1234 im a big fan of flowmaster. Thats what ive always had on all my trucks. It is also what I have on my 2016 ram Laramie. I have the flowmaster outlaw series with the resonators deleted and it sounds amazing. Cold starts full throttle are loud but normal driving is definetly tolerable. No major drone sounds in the cab. Corsa exhaust I beleive is more expensive than flowmaster but dont quote me on that. I prefer the throaty deeper exhaust on a V8 truck better.
@@ManwithaRam It would be for a 03 Viper. I’ll take a look and see what flowmaster have though. Always liked their sound on my friends trans amd or mustangs. Thank brother! 👍🏼
Yeah when the ecodiesel goes into cleaning mode with the Def the exhaust gets real hot. Matter fact the airport I work at will not let diesel with Def cleaning systems on the airfield cause the exhaust gets so hot it could ignite fuel on the ground. I should have had you come to my house and fix my Ram. I had a lifter failure. Mopar no car. Guess I have no car. LOL Got the head off and now in the process of getting the timing cover off.
I have the stock muffler setup 2014 Ram 1500 5.7L v8 Hemi . I'm wondering would this be a improvement over stock not much on BIG muffler sounds unless it's a old 80's truck or car but was wondering is the sound louder than stock ?
wondering same thing?? any info...I have a flowmaster outlaw exhaust ...I wanna change tips to 5 inch and possibly delete resonators...but don't wanna throw off codes
They claim the longer and bigger the flare out on the tip from the mounting off the pipe size the deeper the tone. Rolled edge is nice easier to clean other that the squared edge. I’d keep them lower. Air gap from the heat. Because that’s not a steel bumper lol wish my side exit had more air gap seeing a very slight change to the clear coat closer to the lower edge towards the pinch weld.
Nice tips 😁…. Im not a fan of the rolled tips.. i like the style you put on an exactly how you installed , consistent space all way round as you say you can see them a bit better ! 👍💯
@@BoostedMotorsports did they do anything as for sound different i forgot task you that ? Some say the rolled tips can sound a little different than non rolled ?
@@DarrensTruckzs It's not the rolled vs non rolled, it's the length of the tip itself. Drawing pictures with words so work with me. The = is the exhaust pipe, the [ is the start of the external tip, ( is the internal start of the tip, the _ is the length of the inside and obviously ] being the exit.....this is the best I can come up using chat lol. The factory ones ======[___] and the ones he put on would be like =[====(__] vs like traditional weld on =[________]
Tear off those fake wheel flairs, just double taped on, painted underneath, looks much nicer. Did it to my ram, same color as yours. To me they give the truck a more "old man" style, less sporty
Click HERE for the same exhasut tips
amzn.to/3rq4sMy
What was the cost on the black exhaust tips?
They about 200
Looks badass! Like it just the way you bolted them on, looks properly centered and adds a nice touch to the truck. Thanks man!
Installed these on my 2020 Ram today and yes install was easy and adjustment was easier. thanks for the vid brother. They look awesome
My goodness these are heaven.. definitely purchasing. Thanks for the video
Thanks Darnell! Definitely a quality part 💪
They look super sweet in the center of the bumper cut out big dog. Nice upgrade
Looks a lot better than stock!!
I have an 05 Rumble Bee 5.7 with a Borla and I centered the tip with the gap the same all around. That's kinda what the cut out is for. It's just one pipe out the left side but it does have the cutout too. Funny... I changed every light to LED also, except the licence plate, that's the last one. Looks good bro! Cool video!
Do the new tips help with more aggressive sound?
hey brotha can you link me to the tonneau cover you have?
ordered. looks so much better
Bro, if I may ask and you don’t mind sharing, what exhaust are you using and do you have a video on it already. Thank you
Looks really cool.
I like the even look but not to close to the bumper. thumbs up
Way better man! I like a consistent gap. I had to beat the heck out of mine to get them off but I do live on a dirt road.
Good video John. They do make the truck look super nice. 💪💪👍👍 I like wider gap.
Tuck them up closer to the bumper, Looks cleaner and if you off road you get better clearance in the rear without scraping those nice tips.
I have the same tips for my truck. love the look but I live in Canada so having the back side of them wide open makes for a nice spot for dirt and crap to get packed in and probably rot eventually
Yeah, really dont know why they just left that open....
Dose doing just that effect sound or just looks ?
Looks awesome brother👍👍💯💯🙌🙌🙌🇺🇸🇺🇸🇺🇸🇺🇸👌👌👌
Does this enhance the sound at all or no?
Do they make it louder?
If i had to guess, I think it would make the sound a tiny bit deeper due to it being about another 3 inches longer and 1 inch larger in diameter. I have the Hemi engine in my 4th gen ram 1500. I would love to try these out. $231 for some tips does sound a bit pricey though. $150 wouldve been more reasonable IMO.
@@ManwithaRam Should I go with Corsa for an exhaust?
@@webberfan1234 im a big fan of flowmaster. Thats what ive always had on all my trucks. It is also what I have on my 2016 ram Laramie. I have the flowmaster outlaw series with the resonators deleted and it sounds amazing. Cold starts full throttle are loud but normal driving is definetly tolerable. No major drone sounds in the cab. Corsa exhaust I beleive is more expensive than flowmaster but dont quote me on that. I prefer the throaty deeper exhaust on a V8 truck better.
@@ManwithaRam It would be for a 03 Viper. I’ll take a look and see what flowmaster have though. Always liked their sound on my friends trans amd or mustangs. Thank brother! 👍🏼
Thanks for the video John. I really like the new tips. They are the truck look so much nicer. Good choice.
Have you ever reviewed the Manta cat back exhaust?
Would've liked to had heard the difference as well.
Will this tip on a stock exhaust for a gmc sierra 1500 z71, increase sound or no ?
Yeah when the ecodiesel goes into cleaning mode with the Def the exhaust gets real hot. Matter fact the airport I work at will not let diesel with Def cleaning systems on the airfield cause the exhaust gets so hot it could ignite fuel on the ground. I should have had you come to my house and fix my Ram. I had a lifter failure. Mopar no car. Guess I have no car. LOL Got the head off and now in the process of getting the timing cover off.
Will it make it a louder? I wanted to try and get mine a little louder. I have a muffler delete all ready. Just a little louder haha
I have the stock muffler setup 2014 Ram 1500 5.7L v8 Hemi . I'm wondering would this be a improvement over stock not much on BIG muffler sounds unless it's a old 80's truck or car but was wondering is the sound louder than stock ?
Will this work on a single exhaust I don’t have dual exhaust
Do they make 5 inch ?
If I delete my resonators will it said off any codes on my truck? I have a 2019 ram 1500 classic 4th gen
wondering same thing?? any info...I have a flowmaster outlaw exhaust ...I wanna change tips to 5 inch and possibly delete resonators...but don't wanna throw off codes
They claim the longer and bigger the flare out on the tip from the mounting off the pipe size the deeper the tone. Rolled edge is nice easier to clean other that the squared edge.
I’d keep them lower. Air gap from the heat. Because that’s not a steel bumper lol wish my side exit had more air gap seeing a very slight change to the clear coat closer to the lower edge towards the pinch weld.
Isn’t much of a sound from the ecodiesel 😁
@@BoostedMotorsports fair enough ;)
I did mine a bit higher up like you mentioned
Def looks way better!
I always say the little things makes huge difference 😏👌🏼 looking good john #BSTEDMTRSPRTS 100k soon
You would think for the price of Flowmaster tips they would throw in a set of clamps.
I like the part where he turned the truck on and showed us how it sounds
I’m going to have to get a set, even garage
Nice tips 😁…. Im not a fan of the rolled tips.. i like the style you put on an exactly how you installed , consistent space all way round as you say you can see them a bit better ! 👍💯
Thanks Darren! I agree I think they look much better!
@@BoostedMotorsports did they do anything as for sound different i forgot task you that ? Some say the rolled tips can sound a little different than non rolled ?
@@DarrensTruckzs It's not the rolled vs non rolled, it's the length of the tip itself. Drawing pictures with words so work with me. The = is the exhaust pipe, the [ is the start of the external tip, ( is the internal start of the tip, the _ is the length of the inside and obviously ] being the exit.....this is the best I can come up using chat lol.
The factory ones ======[___] and the ones he put on would be like =[====(__] vs like traditional weld on =[________]
@@JC4041 ok i hear ya .. thanks for your info I appreciate that much N i follow what your saying you did well explaining thanku 👍
They make a 2022 4th gen?
2022 is NOT a 4th gen ...... 4th gen is 2009 - 2018 & 2019 classic
And the sound ?!
Not for $231 bucks!! Aero makes one that is about $40 cheaper and sometimes even more when there are sales.
The clamps are $17/each might as well order them too..
Ya I want better tips also
Definitely alot better
Much betta🤳《☆》Soundbite pls🖖🤓🏈
I would but the ecodiesel engine isn’t much of a sound compared to the hemi 😂
I like gap
Rather have the Carven tips
So expensive damn!
Tuck and roll!
Tear off those fake wheel flairs, just double taped on, painted underneath, looks much nicer. Did it to my ram, same color as yours. To me they give the truck a more "old man" style, less sporty
So do you wanna donate those to an underprivileged guy than someone who can’t afford cool things like this?lol
wtf ,, i watched this video and we dont get to hear it run !!!!!! fbs
I waited 6min to hear you start it up and......................
Wider gap for me.
Oof. Thats an awful lot of cheddar for a couple exhaust tips.
Cerakote > Plastidip
Consistent gap
First
Waste of money just redo plastidip