I can hear our valve has water flowing through it but does not leak water when solenoid is loosened nearly 5 turns, and the manual bleed screw does not turn on heads or leak water. Flow control is fully loosened too, solenoid was tested and works. I think there might be a clog in the valve but i took it apart and the whole thing was clean as a whistle. Im thoroughly confused now
My system stopped turning on at its scheduled time. I changed out the entire top of the valve, but it still won’t turn on at the scheduled time. I can hear the click at the valve at its scheduled time of 7AM for it to turn on, but it doesn’t come on. I can manually turn it on at the controller box which doesn’t make sense to me. I can’t figure it out. Any suggestions?
Outstanding video! Thank you for taking the time, much appreciated!
Love the video and problem solving! Now if there was a video for leaking/seeping valves basically valves that won’t turn off that would be ideal
Thanks for the idea, we'll add it to our list!
Wow! very good advice it cover pretty much everything. Thank you for taking the time to explaining it ....plus the images are great!.
Glad you enjoyed it!
I can hear our valve has water flowing through it but does not leak water when solenoid is loosened nearly 5 turns, and the manual bleed screw does not turn on heads or leak water. Flow control is fully loosened too, solenoid was tested and works. I think there might be a clog in the valve but i took it apart and the whole thing was clean as a whistle. Im thoroughly confused now
There may be a restriction after the irrigation valve. It may be time to meet with your local irrigation professional for field help.
@@Hunter_Industries thank you, we replaced the valve and it works fine now.
My system stopped turning on at its scheduled time. I changed out the entire top of the valve, but it still won’t turn on at the scheduled time. I can hear the click at the valve at its scheduled time of 7AM for it to turn on, but it doesn’t come on. I can manually turn it on at the controller box which doesn’t make sense to me. I can’t figure it out. Any suggestions?
This sounds like a good reason to contact our customer support department here: www.hunterindustries.com/hunter-technical-support-email-request
Fixed my issue, thank you
Glad it helped