Ive watch about 10 videos to see if anyone could explain the correct way of repairing a valve and this one is the best. Ive been in the Irrigation industry for 35 plus years. Not bad sir
Thank You So Much...watched this Video...went to My Mom in Law's yard...done in a few minutes....😊😊😊😊 She is now upset that I didn't charge Her....lol...a 90 yr old mad at a 70 yr old
Thanks allot, I have the underground one but the same things applies, thanks to your video I was able the repair my system confidently and not break anything in the process and save on a costly repair. ❤
Hey Jesse.. that’s fantastic to hear!!! I love being able to provide some helpful info for folks! I appreciate you taking the time to comment and let me know it worked for you! 😎
The bottom of that diaphragm looked like it was starting to deteriorate. On that one I would've probably went ahead and swapped that part out for a new one... good video though, & you're right, most of the time that'll do it.
Note: When replacing/ re-screwing the bonnet back on, use a "STAR" pattern to secure the bonnet screws OR you will likely (now) get a leak at the bonnet.
A "Star" pattern is simply alternating which screws you tighten, HOW far you tighten them at a time, and in which order you tighten them. Googles something like "how to tighten screws in a star pattern". Hope this helps!
To the contrary... you will very very unlikely (now) get get a leak on the outside of the valve, if you do not use a star pattern. Sorry bub, but this is simply not true... it's an ancient irrigation wives tale. Maybe it used to be true, when they were using a different type of gasket or something, but I challenge anyone, at least on these DV series RB valves, to NOT do a star pattern and come back to say I'm wrong... So long as two screws are first secured across from eachother, you can tighten the rest in any order you want. I hope this helps.
Fantastic video!! I wish my valves were above ground like these but sadly, they are in the ground. Each one of my valves is in a round valve box and when i went to inspect them, they were ALL filled with water. We haven't had rain in a couple weeks. House is about 12 years old and i dont think the valves have ever been maintained. Any thoughts on why the boxes would be full of water? Im hoping the pipes aren't causing the problem.
Very much appreciated! In-line valves can be a little harder to repair just because of their placement underground. They can also still get debris stuck in the diaphragm. But that usually doesn’t cause a leak at the valve itself. You could have a small leak in one of the fittings close to the valve box. When the valves are off and no water anywhere on the property is running, look at your water meter. Locate the small leak detector (black and red triangle). If it’s spinning, you may have a leak somewhere. That’s the first step. Then it’s a tracing issue. But since your valve box is full of water, chances are one of the valves may have a leak in the body or fittings. I hope this helps give some direction.
@@RootedTheory thanks for the reply. That is what I'm afraid of. Sounds like that is the most difficult repair to have to make but that is usually how my luck is lol. I've shut off the water main to the sprinkler system and pumped all the water out of the boxes. I plan to clean them out a bit then slowly turn the water on again to try to spot where the water is coming from. Wish me luck!
Thanks for the video. What’s the function of the tiny yellow filtered port on the diaphragm? Other systems refer to it as metering port. I ask because I was troubleshooting my system for very low flow and noticed this piece broke off leaving a hole in the diaphragm
Thanks for watching! To be quite honest, I’m not sure what that small piece is for. It’s not even on the exploded valve diagram from Rainbird. I’m going to research!
Water back flow of the valve from the vedio, is that meaning to replace the valve inserted of replacing the diaphragm? It happen to me after I replace the diaphragm, i am wondering what cause that happen.😢😢😢😢
I’ve never seen those little wrench caps that go on top of the solenoid of the valve. Yours came with your valves? I’d love to buy some to throw on top of my solenoids. I just replaced all my Rainbird valves. Any idea where I can pick up those at?
@@RootedTheory Gotcha. Bummer they dont come on them when I got them from Lowes/Home Depot. I was hoping I could buy them separate since I already got them at HD. Guess Ill just use a wrench. ;)
Funny, my valves are in the ground and when I saw those handles on my valves it confused me because most of the videos I've seen don't show them. So glad this guy even mentioned them! I figured my valves were "special" lol.
I have 2 zones that have poor pressure. When I open them manually with the bleeder they still have low pressure. I dont believe that it's a root pinching the line as I dont hear any pinches anywhere in my yard. Thoughts of what may be causing this??
Oh man could be a few factors.. if those two valves are particularly old and other newer ones don’t have the same issue, you may be dealing with old galvanized lines which could restrict pressure as the interior of the pipe become corroded. Do you have any other valves on the property? How are they functioning? And were these two old valves always low pressure or has this changed over time?
There could maybe be a break in the line somewhere that is out of sight or underground. Maybe take a look around the property to see if that’s the case. Look for spots that may be over saturated or sinking. Also check if there is a shut off valve dedicated to the irrigation valves. That may have gotten turned down if anyone has worked on the valves. Also see if there is a pressure regulator that maybe got adjusted. These would be all the things I’d look for first before replacing the valves. If none of these are the issue, try replacing just one of the valves first as a test.
I’d like to know how to find the valve/solenoid in my yard. You mentioned it sits at the highest point? But can’t find it or a lid anywhere. Heard it’s expensive just for the tracking device or to have someone find it. Advice?
Hey! So even though anti-siphon valves SHOULD be installed above the highest water e-mentor/sprinkler, that’s not always the case. But that would be the first place to start looking. And generally speaking, they are most often located near where the main line enters the house or by a hose bib. Now, there can also be banks of valves (manifolds) strategically located throughout the yard if the lot size is larger. And not every system will have anti-siphon valves. In-line valves would be located underground typically in a valve box. All in all you will have to do some hunting as there is no one set location that valves are placed in the landscape.
It could be a few things… A crack in the sprinkler head body. Low pressure causing a bad seal between the body and the pop-up riser. Or maybe the simplest thing, the head may just need to be tightened.
If it's leaking or spraying out excessively, a riser or sprinkler is broken or cracked. Otherwise adjust the sprinkler or its a low spot collecting and spoiling water there. Could just be the seals on/ in the sprinkler body. If you buy the same identical sprinkler, even any size if it's just the cap or seal around the cap piece. You can just swap that out, without having to dig up or replace the whole sprinkler.
My lowest elevation sprinkler head only leaks about 4-5 minutes after the system shuts off. I presume the remaining water is draining out. Is this normal or a valve problem?
There’s often this situation at sites where there is elevation change. Hunter makes a pop up body that has a built in check valve. Try changing out the heads on that zone for these: amzn.to/3VFMZ1T
It’s possible that there is a break in the lateral line or at one of the heads. When it’s on, look all around for areas that may become over saturated. That’s the most telltale sign. Another possible issue could be improper wiring of the valves. I’ve seen instances where two valves have been accidentally wired together causing them to both go on at the same time. This creates too much draw on the system which would count for low pressure.
There are some valves in which the diaphragm cannot be removed. This is usually the case on less expensive valves. It may be worthwhile to replace the whole valve if it’s not functioning properly. Go for Hunter or Rainbird
Geez. Putting irrigation system components underground sounds like a cruel and unusual punishment for future generations, considering how easily and often the components will need to be repaired or replaced.
Ive watch about 10 videos to see if anyone could explain the correct way of repairing a valve and this one is the best. Ive been in the Irrigation industry for 35 plus years. Not bad sir
Really do appreciate the kind words. And thank you for watching! 😎
I've never dealt with a sprinkler system and now I have a pretty decent understanding of how those valves work. Thanks.
AWESOME!! So glad to hear that the vid has been of help. Thanks for watchin 😎
Thank you! Just moved into a new house. Know NOTHING about these systems and you helped me fix the problem. Prob saves me some money too 🎉🎉🎉
EXCELLENT!! Love hearing that. So glad to be of some help. And thanks for watchin 😎
Yup if you call anyone they’ll charge you at min 200 to simply look at it.
Love your explanations. Clear and concise and geared towards pretty much any DIY person. Thanks.
Thank you so much for the kind words! Makes it all worth while 😎And thank you for watching!
I did it!!!! I'm so proud of myself. Thanks for sharing the knowledge.
Awesome!!!! Well done 🙏🏼🙏🏼🙏🏼 This is why I share to stuff 😎😎 You probably saved $200 from having a plumber come out to do a 10 minute fix 🙌🙌🙌
You just saved me so much time. Thank you!
Glad I could help! 😎
Home Depot. Lowe’s. Just have this guy produce all your information. Great job buddy.
Hahaa yeah that would be nice.. a little extra side cash 💰 💰💰 Many thanks!! 🙏🏼 😎
That was so helpful! Thank you!
Awesome!!
Nice I fixed it already thanks to your video
Awesome!! 😎😎💪
Excellent video. Very well done.
Thanks!🙏🏼 🙏🏼🙏🏼😎
Amazing it worked for me .. thanks for sharing
AWESOME!!! Well done 🙏🏼💪😎
Thank you! Save me lots of time and $ to replace the whole valve.
Awesome!! That’s what I like to hear!! 😎
Nice work 👍🏽 , I would flush the valve while it is open to make sure small rocks and debris aren’t sitting in the main side pipe.
Absolutely a great insight. Thanks for sharing 😎
Thank You So Much...watched this Video...went to My Mom in Law's yard...done in a few minutes....😊😊😊😊
She is now upset that I didn't charge Her....lol...a 90 yr old mad at a 70 yr old
AWESOME!! Feels good to get some DIY stuff done 😎
i learned something new
Great info, thank you
Thanks for watching!
Awesome video! Thank you.
Hopefully it helped! Thanks so much for watchin 😎
Thanks allot, I have the underground one but the same things applies, thanks to your video I was able the repair my system confidently and not break anything in the process and save on a costly repair. ❤
Hey Jesse.. that’s fantastic to hear!!! I love being able to provide some helpful info for folks! I appreciate you taking the time to comment and let me know it worked for you! 😎
The bottom of that diaphragm looked like it was starting to deteriorate. On that one I would've probably went ahead and swapped that part out for a new one... good video though, & you're right, most of the time that'll do it.
Your mom is deteriorating
Note:
When replacing/ re-screwing the bonnet back on, use a "STAR" pattern to secure the bonnet screws OR you will likely (now) get a leak at the bonnet.
What does this mean
A "Star" pattern is simply alternating which screws you tighten, HOW far you tighten them at a time, and in which order you tighten them.
Googles something like "how to tighten screws in a star pattern".
Hope this helps!
That’s great insight!
To the contrary... you will very very unlikely (now) get get a leak on the outside of the valve, if you do not use a star pattern. Sorry bub, but this is simply not true... it's an ancient irrigation wives tale. Maybe it used to be true, when they were using a different type of gasket or something, but I challenge anyone, at least on these DV series RB valves, to NOT do a star pattern and come back to say I'm wrong... So long as two screws are first secured across from eachother, you can tighten the rest in any order you want. I hope this helps.
@@OGRH fine don't do it - your problem not mine.
Fantastic video!! I wish my valves were above ground like these but sadly, they are in the ground. Each one of my valves is in a round valve box and when i went to inspect them, they were ALL filled with water. We haven't had rain in a couple weeks. House is about 12 years old and i dont think the valves have ever been maintained. Any thoughts on why the boxes would be full of water? Im hoping the pipes aren't causing the problem.
Very much appreciated! In-line valves can be a little harder to repair just because of their placement underground. They can also still get debris stuck in the diaphragm. But that usually doesn’t cause a leak at the valve itself. You could have a small leak in one of the fittings close to the valve box. When the valves are off and no water anywhere on the property is running, look at your water meter. Locate the small leak detector (black and red triangle). If it’s spinning, you may have a leak somewhere. That’s the first step. Then it’s a tracing issue. But since your valve box is full of water, chances are one of the valves may have a leak in the body or fittings. I hope this helps give some direction.
@@RootedTheory thanks for the reply. That is what I'm afraid of. Sounds like that is the most difficult repair to have to make but that is usually how my luck is lol. I've shut off the water main to the sprinkler system and pumped all the water out of the boxes. I plan to clean them out a bit then slowly turn the water on again to try to spot where the water is coming from. Wish me luck!
Thanks for the video. What’s the function of the tiny yellow filtered port on the diaphragm? Other systems refer to it as metering port.
I ask because I was troubleshooting my system for very low flow and noticed this piece broke off leaving a hole in the diaphragm
Thanks for watching! To be quite honest, I’m not sure what that small piece is for. It’s not even on the exploded valve diagram from Rainbird. I’m going to research!
Water back flow of the valve from the vedio, is that meaning to replace the valve inserted of replacing the diaphragm? It happen to me after I replace the diaphragm, i am wondering what cause that happen.😢😢😢😢
Trying this tomorrow
👍👍😎
Great video! Well done! Good info!! :)
Thanks for watchin! 😎 Really appreciate the kind words 🙏🏼
I’ve never seen those little wrench caps that go on top of the solenoid of the valve. Yours came with your valves? I’d love to buy some to throw on top of my solenoids. I just replaced all my Rainbird valves. Any idea where I can pick up those at?
Yes!.. they generally come with the valve when you purchase at a landscape supply place such as Ewing Irrigation and Landscape.
@@RootedTheory Gotcha. Bummer they dont come on them when I got them from Lowes/Home Depot. I was hoping I could buy them separate since I already got them at HD. Guess Ill just use a wrench. ;)
Funny, my valves are in the ground and when I saw those handles on my valves it confused me because most of the videos I've seen don't show them. So glad this guy even mentioned them! I figured my valves were "special" lol.
Wow all the prayers. The goat sacrifices
Saved my sanity!
Glad to be of service 😎🙏🏼
I have 2 zones that have poor pressure. When I open them manually with the bleeder they still have low pressure. I dont believe that it's a root pinching the line as I dont hear any pinches anywhere in my yard. Thoughts of what may be causing this??
Oh man could be a few factors.. if those two valves are particularly old and other newer ones don’t have the same issue, you may be dealing with old galvanized lines which could restrict pressure as the interior of the pipe become corroded. Do you have any other valves on the property? How are they functioning? And were these two old valves always low pressure or has this changed over time?
@@RootedTheory they worked fine last year. Everything in this lawn is poly or PVC...no galvanized
There could maybe be a break in the line somewhere that is out of sight or underground. Maybe take a look around the property to see if that’s the case. Look for spots that may be over saturated or sinking. Also check if there is a shut off valve dedicated to the irrigation valves. That may have gotten turned down if anyone has worked on the valves. Also see if there is a pressure regulator that maybe got adjusted. These would be all the things I’d look for first before replacing the valves. If none of these are the issue, try replacing just one of the valves first as a test.
Do i keep the valves in the "ON" position or "OFF" after installation?
Leave the solenoid off if you have a timer. The timer will trigger the valve on.
Thank you. I really like you in Charles in Charge.
Yeah those were the good ole days. I’m mostly just in charge of plants now. They don’t talk back 😎
Wow awesome tip thank u!
Thanks for watchin! 😎
I’d like to know how to find the valve/solenoid in my yard. You mentioned it sits at the highest point? But can’t find it or a lid anywhere. Heard it’s expensive just for the tracking device or to have someone find it. Advice?
Hey! So even though anti-siphon valves SHOULD be installed above the highest water e-mentor/sprinkler, that’s not always the case. But that would be the first place to start looking. And generally speaking, they are most often located near where the main line enters the house or by a hose bib. Now, there can also be banks of valves (manifolds) strategically located throughout the yard if the lot size is larger. And not every system will have anti-siphon valves. In-line valves would be located underground typically in a valve box. All in all you will have to do some hunting as there is no one set location that valves are placed in the landscape.
You're awesome. Nice tips. Thabk you
Thank you!!
Nice sharing ✌
great video.
Cheers! 🍻
What about a sprinkler head that leaks on my sidewalk when it’s running? I have Hunter MP Rotators watering this area in front lawn?
It could be a few things…
A crack in the sprinkler head body.
Low pressure causing a bad seal between the body and the pop-up riser.
Or maybe the simplest thing, the head may just need to be tightened.
If it's leaking or spraying out excessively, a riser or sprinkler is broken or cracked. Otherwise adjust the sprinkler or its a low spot collecting and spoiling water there. Could just be the seals on/ in the sprinkler body. If you buy the same identical sprinkler, even any size if it's just the cap or seal around the cap piece. You can just swap that out, without having to dig up or replace the whole sprinkler.
Perfect!
🙏🏼😎
i smash like button. i ding dong notification bell.
Atta boy!
My lowest elevation sprinkler head only leaks about 4-5 minutes after the system shuts off. I presume the remaining water is draining out.
Is this normal or a valve problem?
There’s often this situation at sites where there is elevation change. Hunter makes a pop up body that has a built in check valve. Try changing out the heads on that zone for these: amzn.to/3VFMZ1T
Thanks
I have slow rising sprinklers and at some point during its funcion the zone starts losing pressure .
HELP ! HELP ! HELP !
It’s possible that there is a break in the lateral line or at one of the heads. When it’s on, look all around for areas that may become over saturated. That’s the most telltale sign. Another possible issue could be improper wiring of the valves. I’ve seen instances where two valves have been accidentally wired together causing them to both go on at the same time. This creates too much draw on the system which would count for low pressure.
Is the fix the same in a drip system valve?
Yes indeed.
You're lucky on that one.
The diaphragm isn’t coming out
There are some valves in which the diaphragm cannot be removed. This is usually the case on less expensive valves. It may be worthwhile to replace the whole valve if it’s not functioning properly. Go for Hunter or Rainbird
My valve is underground. Not simple.
Maybe a tad more difficult to access, but the same repair principle applies.
Geez. Putting irrigation system components underground sounds like a cruel and unusual punishment for future generations, considering how easily and often the components will need to be repaired or replaced.
Great video! Thank you
Thank you!! 🙏🏼 😎