BEHRINGER VIRTUALIZER PRO DSP2024P

Поділитися
Вставка
  • Опубліковано 4 гру 2024

КОМЕНТАРІ • 68

  • @domino4565
    @domino4565 Місяць тому +1

    The sound is incredible!

  • @1blisslife
    @1blisslife 2 роки тому +1

    Nice concise demonstration of that bit of kit. I was contemplating on buying one & now will thanks to you. Cheers

  • @scottchilds5726
    @scottchilds5726 9 місяців тому +1

    How did you hook up the ex 3200 with that? Awesome setup, i have all of them to. Thank you

  • @jennaleigh-raine
    @jennaleigh-raine 3 роки тому +1

    Wish there was video of what leads to use from the Visualiser to the interface back out of the daw but he'll not one

  • @CityPlanet
    @CityPlanet Рік тому +1

    Hi, could you please measure the voltages of the secondary windings on the transformer? It's burned out, and I can't find what voltages it's putting out (V-PRO DSP2024P). 73, SV4FHS

  • @TheMadamfee1234
    @TheMadamfee1234 3 роки тому +1

    Hi George, my name is Fiona and I'm a pro singer. I have the DS2024P and was wondering if you could help me set up my mic. I don't have the manual and I'm confused as what to do. Any help would be appreciated please.

  • @Jaxifyer
    @Jaxifyer 4 роки тому +2

    Im getting an error code saying err9, help me please

  • @zhenmaster888
    @zhenmaster888 2 роки тому +1

    I noticed only the LEFT channel meter is active and the RIGHT is not moving at all. I have the same exact problem. Do you know why that is? Thanks.

    • @GeorgeEI7KO
      @GeorgeEI7KO  2 роки тому

      Set to mono mode? In my case that is necessary

    • @zhenmaster888
      @zhenmaster888 2 роки тому

      @@GeorgeEI7KO Thanks for your reply. Is there a switch on the back to switch to Mono mode? Please advise.. Thank you.

  • @dragonheatbeats9944
    @dragonheatbeats9944 10 місяців тому +1

    How do you get it to output in stereo?

  • @blacquentertainment5337
    @blacquentertainment5337 4 роки тому +1

    I'm using both inputs but only the left side lighting up.

  • @ringi1970
    @ringi1970 2 роки тому +1

    Is it possible to stack effects? Or only one at a time?

    • @GeorgeEI7KO
      @GeorgeEI7KO  2 роки тому

      I dont think so, but im not a 100% sure on that...

  • @powertalk9612
    @powertalk9612 5 років тому +2

    Yes

  • @prestudiomix9361
    @prestudiomix9361 2 роки тому +1

    Como voltar padrao de fabrica formatar b dia

  • @bobcatt2294
    @bobcatt2294 5 років тому +1

    I have the Alesis QuadraVerb and wondering the difference between that and this unit.

    • @GeorgeEI7KO
      @GeorgeEI7KO  5 років тому

      I can't answer that I'm afraid. I don't have that particular unit.

    • @bobcatt2294
      @bobcatt2294 5 років тому +1

      The one difference is, the Alesis QuadraVerb, as the name implies, you can have 4 effects at the same time. I am about the quality of the effects. The VIRTUALIZER PRO is categorized as a budget device. Thank you for your response.

    • @GeorgeEI7KO
      @GeorgeEI7KO  5 років тому

      @@bobcatt2294 thats cool. In my particular application, I only want a small amount of plate added to the audio. I'd have no need for that function on amateur radio.

  • @proyectostow6719
    @proyectostow6719 5 років тому +2

    What is newer DSP2024 or Fx2000? tanks

    • @GeorgeEI7KO
      @GeorgeEI7KO  5 років тому

      I'd imagine the fx2000 is the more recent unit. Thanks for the comment!

    • @proyectostow6719
      @proyectostow6719 5 років тому +1

      @@GeorgeEI7KO Tanks!

    • @GeorgeEI7KO
      @GeorgeEI7KO  5 років тому

      Your welcome!

  • @vezokholohe4453
    @vezokholohe4453 5 років тому +2

    Can I use that as my compressor?

    • @GeorgeEI7KO
      @GeorgeEI7KO  5 років тому +2

      No, afraid not. You need a seperate unit for that.

    • @mylescaldwell4455
      @mylescaldwell4455 3 роки тому +1

      This isn’t true; this unit has a bunch of algorithms including some mastering/level processing. You can also run it in true stereo or as two different algorithms in mono series, by the way.

  • @david91151
    @david91151 Рік тому +1

    Tengo un virtualizer 2024p me aparece err9 en la pantalla

  • @NicholasT-f9n
    @NicholasT-f9n 4 роки тому +1

    Are those CB radio's above ?

    • @GeorgeEI7KO
      @GeorgeEI7KO  4 роки тому

      Guilty your honour. I restore and modify them

    • @NicholasT-f9n
      @NicholasT-f9n 4 роки тому +1

      @@GeorgeEI7KO You're not guilty, you're smart ! I used a Cobra 148GTL in the 80's. I was pulling signal from over 200 miles with a Wilson Antenna ! Had a diy spring reverb on a 9v !

    • @GeorgeEI7KO
      @GeorgeEI7KO  4 роки тому

      @@NicholasT-f9n I have a highly customised 148 GTL here. 1979 model.

    • @NicholasT-f9n
      @NicholasT-f9n 4 роки тому

      @@GeorgeEI7KO '79 148GTL - WOW ! that's a rare beast.
      What's your opinion on cheap ebay PLL fm transmitters ?
      Can you private msg me your email, would enjoy chattin offline.

  • @hectorortega9131
    @hectorortega9131 4 роки тому +1

    Hello, george, Can i use this to put sound effects on the music im playing too?

    • @GeorgeEI7KO
      @GeorgeEI7KO  4 роки тому +1

      You can only add effects that this unit has. Like plate, echo, flanger etc.

    • @hectorortega9131
      @hectorortega9131 4 роки тому +1

      @@GeorgeEI7KO ok. Thats what i needed to know, Gracias!, 👍

  • @Paulecir
    @Paulecir 3 роки тому +1

    Can i use that on microphone/voice?

  • @deepmate6284
    @deepmate6284 2 роки тому +1

    Wow you have a lot of equipament there, is it your work in life? I love this room!!

    • @GeorgeEI7KO
      @GeorgeEI7KO  2 роки тому

      No, its just a hobby. I am into Amateur radio.

  • @langayrizwan070
    @langayrizwan070 Місяць тому +1

    Price

  • @algerianarabmuslim3491
    @algerianarabmuslim3491 3 роки тому +1

    Please How to connect behringer deq2496 ultra curve pro in cubase and sound card m-track eight

    • @GeorgeEI7KO
      @GeorgeEI7KO  3 роки тому

      Sorry, I have no idea

    • @algerianarabmuslim3491
      @algerianarabmuslim3491 3 роки тому +1

      @@GeorgeEI7KO There is no way to link it to Cubse?

    • @GeorgeEI7KO
      @GeorgeEI7KO  3 роки тому

      @@algerianarabmuslim3491 Ive no clue man. I have no experience of that whatever it is

  • @officialpoa3171
    @officialpoa3171 2 роки тому +1

    *This is exactly WHY guitar center, american musical supply and zzounds refuse to carry BEHRINGER BRAND! This unit is $150 us and sounds like a hi-dollar LEXICON/TC ELECTRONIC..! The Behringer ADA8200 is all the same with mic 8 preamps comparable to units costing thousands of dollars and for only $250.*

    • @GeorgeEI7KO
      @GeorgeEI7KO  2 роки тому

      Cheers bro. The bang for buck is unparalleled. Still have it all.... Still working well.

  • @kenwood8665
    @kenwood8665 6 років тому +1

    Great stuff George

    • @GeorgeEI7KO
      @GeorgeEI7KO  6 років тому

      Rick8665 Thaks Rick. I hope you are doing great.

  • @boxingday11
    @boxingday11 6 років тому +1

    Great stuff George, what's next go on what's next.
    All the best, regards Carl..

    • @GeorgeEI7KO
      @GeorgeEI7KO  6 років тому

      boxingday11 I'm sure I'll think of something Carl lol. Hope you are well. 73

  • @samsularifin3743
    @samsularifin3743 4 роки тому +1

    behringer ORI

  • @alphonsadebardelaben8238
    @alphonsadebardelaben8238 5 років тому +1

    that unit looks like its burned out . hay know minds burned out long ago.

  • @Bombastiquarian
    @Bombastiquarian Рік тому

    Absolutely NO disrespect-people use their tools to suit their own needs and they have every right to do so! But this device has 100 factory-generated presets-in addition to 100 user-customizable presets-of combinations of more than 70 user-configurable effects... and you use it for 6% reverb.
    It feels like a little overkill. 🤣

    • @GeorgeEI7KO
      @GeorgeEI7KO  Рік тому +1

      in a bandwidth of 3Khz....6% is plenty

  • @samsularifin3743
    @samsularifin3743 4 роки тому +1

    test hellow bro..🤣

  • @urbannpa
    @urbannpa 4 роки тому +1

    Thanks great video...Now go have a Pint on me.