These are the most beautiful countertops! I love this color combo and pattern so much. Come do my counters pleaseeeeeeeeeee! I was going to do them myself, but had to have emergency spine surgery in October. It has set me back of course.
Would you please do a Stone Kit # 17 in a gloss finish? Maybe with some of the diamonds in the spray to make the cells before the denatured alcohol to remove the bubbles? Thanks! That's the one I am considering for a new home build in the kitchen
I’ve watched other epoxy countertop videos and they all used a torch or heat gun to get the bubbles out. I noticed that you guys didn’t do that in the video. Did you do that off-camera, or was it not necessary with the product that you used?
So how come everything you do has a nice flat 90 degree edge? What about some laminates that have the raised rounded edge? I'm assuming that has to be done by hand spreading?? Getting ready to do mine and your videos do help except for what I need.
I have never done this type of job before, but from watching other videos, it seems that you can’t really do it on a raised-edge counter. One video even said to sand the “hump” down to level.
how would you get this design on to a 6 inch back splash ? im getting ready to do my counter tops and love this design but now worried about the back splash how will i pull that off
There are a few different ways to do backsplash. Although it is possible, we don't recommend coating the backsplash while it is still on the wall. The design simply won't turn out great as good as it can be. It's best to remove the backsplash if possible then coat it horizontally and re-install it. Or, remove and install or more traditional one. Or coat right up to the backsplash, taping 1/8th inch up the backsplash. Lots of options! ua-cam.com/video/PyAIKugTz0E/v-deo.html ua-cam.com/video/kUAziUFcgF4/v-deo.html
Isopropyl alcohol 91% or higher is used for the dispersing effect to give you the cells and craters and then you finish with denatured alcohol to pop any bubbles!
هذا يسمي بالأيبوكسي ماده الأيبوكسي ماده كيميائيه مكونه من مادتين الماده الأساسيه والملده المصلبه ويتم استخدامها بالنسب المكتوبه على المنتج يتم الخلط جيداً واضافه الألوان المناسبه للماده
Can I do something like this on an outdoor kitchen? I live in the New York. Harsh cold winters & humid summers.. can you show how to do this if you can? Would it survive the weather?
The layer itself is probably as heat resistant as the original surface. I've used epoxy on several well-used surfaces and they've lasted for years now with minimal scratches or damage. I didn't even use Leggari which appears to be a higher quality product.
Hello! How you prep for epoxy depends on your substrate. Check these out! 👇 General prep: ua-cam.com/video/7KJ2rRglsSU/v-deo.html Prep over granite: ua-cam.com/video/68QhkUmYAS0/v-deo.html Prep over tile: ua-cam.com/video/SHTeQ9YxsY4/v-deo.html Prep over formica: ua-cam.com/video/2cmP3_CJnqc/v-deo.html
The dispersing effect is achieved by spraying small to medium drops of 91% isopropyl alcohol, then finish with a fine mist of denatured alcohol (fuel) to pop any bubbles and allows the epoxy to lay out glass smooth!
Dear friends, please know that Jesus Christ our Lord and our Savior, is The WAY, The TRUTH, and The LIFE! He loves you so much. The greatest decision you will EVER make is welcoming Jesus Christ into your life right now!! Confess with your mouth and believe in your heart that Jesus Christ is Lord of your life. Believe in His death on the cross, burial and resurrection for the sins of all human-kind and you will be saved. In the name of the Father, the Son and the Holy Spirit, may Father God, our Creator bless you in the Glorious name of His Son, Jesus Chris our Lord and Savior. 🙏❤️
So how come everything you do has a nice flat 90 degree edge? What about some laminates that have the raised rounded edge? I'm assuming that has to be done by hand spreading?? Getting ready to do mine and your videos do help except for what I need.
These are the most beautiful countertops! I love this color combo and pattern so much. Come do my counters pleaseeeeeeeeeee! I was going to do them myself, but had to have emergency spine surgery in October. It has set me back of course.
Да глаз не возможно оторвать молодцы.
Omg looking very good. I like this countertops.
Thank you!
Such an amazing product, I hope to use it in the near future!
You should! Thanks for watching!
@@LeggariProducts Hope he doesn't have a warranty issue (corner chip). You all referred me to Home Depot.
Leggari products always a hit🔥
Would you please do a Stone Kit # 17 in a gloss finish? Maybe with some of the diamonds in the spray to make the cells before the denatured alcohol to remove the bubbles? Thanks! That's the one I am considering for a new home build in the kitchen
I’ve watched other epoxy countertop videos and they all used a torch or heat gun to get the bubbles out. I noticed that you guys didn’t do that in the video. Did you do that off-camera, or was it not necessary with the product that you used?
Once again a Pretty Sweet looking project
Wower ! 👍
Thanks for watching!
Superb👏
There’s no need to sand/scuff the surface? Also, is countertop epoxy different from floor epoxy?
Gold, whit, and silver
Id love to see some counter tops or floors in black with dark blue, silver, and white highlights.
Great color combo! Stay tuned!
So how come everything you do has a nice flat 90 degree edge? What about some laminates that have the raised rounded edge? I'm assuming that has to be done by hand spreading?? Getting ready to do mine and your videos do help except for what I need.
I have never done this type of job before, but from watching other videos, it seems that you can’t really do it on a raised-edge counter. One video even said to sand the “hump” down to level.
Great video
Glad you enjoyed it!
How would you do this on a floor? I just bought a kit for my living room but can’t find black base with grey and titanium veins
This is amazing. Do you go over it w heat to eliminate air bubbles?
Another great job
Do you have a video showing how to measure properly for kitchen counters and island?
Hi boss, you use alcohol for what?
I want to try this but with a black and gold color scheme.
I wish i would be able to buy your products....happy new year
When do you pull the tape from against the wall? None of the videos show this
Is there a sealer that goes on after the fact?
I'd like to simulate green with white veining and maybe golden mineral accents.
That would be cool!
What can of alcohol you use
Can you please tell me the cost per square meter?
Beautyfull
Seeing you paint over that last amazing countertop was hard to watch lol
Thank you for watching!
Puedo conseguir estos materiales en Colombia?
C'est magnifique😍
I don't see any sanding being done. Does it stand up to use without sanding?
how would you get this design on to a 6 inch back splash ? im getting ready to do my counter tops and love this design but now worried about the back splash how will i pull that off
There are a few different ways to do backsplash. Although it is possible, we don't recommend coating the backsplash while it is still on the wall. The design simply won't turn out great as good as it can be. It's best to remove the backsplash if possible then coat it horizontally and re-install it. Or, remove and install or more traditional one. Or coat right up to the backsplash, taping 1/8th inch up the backsplash. Lots of options!
ua-cam.com/video/PyAIKugTz0E/v-deo.html
ua-cam.com/video/kUAziUFcgF4/v-deo.html
I would like to see something in a pearl and an orange and keep it light
looks like this is not a thick surface, will it easily broken when sometimes we cutting some kind of hard food?
Don't use the surface as a cutting board and it will last a long time lol.
Could you send demonstrations to wall epoxy please
Badass!!! What does spraying the different types of alcohol on it do?
Isopropyl alcohol 91% or higher is used for the dispersing effect to give you the cells and craters and then you finish with denatured alcohol to pop any bubbles!
رائع جدا 💪
ايش اسم هذا العمل
اذا ابي اشتري في السعوديه كيف احصله
هذا يسمي بالأيبوكسي
ماده الأيبوكسي ماده كيميائيه مكونه من مادتين
الماده الأساسيه والملده المصلبه
ويتم استخدامها بالنسب المكتوبه على المنتج
يتم الخلط جيداً واضافه الألوان المناسبه للماده
@@mofouadkingofepoxy7177 جميل هذي الطاولات
perfect
Thank you!
Can I do something like this on an outdoor kitchen? I live in the New York. Harsh cold winters & humid summers.. can you show how to do this if you can? Would it survive the weather?
no epoxy is rly bad with UV light its turning piss yellow, good epoxy not as much but they all do.
Mantap good
I noticed the tape was left around the sink even after pulling the tape from all the other edges, when does that come off?
The sink tape comes off when all of the other tape does-once the epoxy is set up enough.
Are these heat proof?
The layer itself is probably as heat resistant as the original surface. I've used epoxy on several well-used surfaces and they've lasted for years now with minimal scratches or damage. I didn't even use Leggari which appears to be a higher quality product.
Not heat proof but very heat resistant
How do you prep the surface you are going to pour on?
Hello! How you prep for epoxy depends on your substrate. Check these out! 👇
General prep: ua-cam.com/video/7KJ2rRglsSU/v-deo.html
Prep over granite: ua-cam.com/video/68QhkUmYAS0/v-deo.html
Prep over tile: ua-cam.com/video/SHTeQ9YxsY4/v-deo.html
Prep over formica: ua-cam.com/video/2cmP3_CJnqc/v-deo.html
how much of your product do you need for what amount of square feet for this application?
Our leggari stone kits go down at 8 oz. per sq ft.
How and where do I begin to even bud an epoxy project? Ex. Countertop
Email customerservice@leggari.com They will be able to help you with your questions!
How do you deal with bubbles?
The dispersing effect is achieved by spraying small to medium drops of 91% isopropyl alcohol, then finish with a fine mist of denatured alcohol (fuel) to pop any bubbles and allows the epoxy to lay out glass smooth!
How can make a order
Does it melt ?
It’s rated at 150 degrees Fahrenheit with direct contact. We always recommend using coasters or hot pads when putting warm things on the counter.
johnny
Still waiting to see this product over existing tile
Me too!
DO YOU SHIP TO MEXICO PRODUCTS
Yes, we do Leggari.com
Fucken awesome
Logo arranhar ? Logo manchar ?quantos anos
Dear friends, please know that Jesus Christ our Lord and our Savior, is The WAY, The TRUTH, and The LIFE! He loves you so much. The greatest decision you will EVER make is welcoming Jesus Christ into your life right now!! Confess with your mouth and believe in your heart that Jesus Christ is Lord of your life. Believe in His death on the cross, burial and resurrection for the sins of all human-kind and you will be saved.
In the name of the Father, the Son and the Holy Spirit, may Father God, our Creator bless you in the Glorious name of His Son, Jesus Chris our Lord and Savior. 🙏❤️
How que i bay in mexico
From experience, this product is not very durable…
Have you used Leggari Products? It's an industrial grade epoxy resin!
So how come everything you do has a nice flat 90 degree edge? What about some laminates that have the raised rounded edge? I'm assuming that has to be done by hand spreading?? Getting ready to do mine and your videos do help except for what I need.
I have the same thing along with probably a lot of other people. that old school laminate bullshit.