If you buy one definitely get the warranty. They are $37 as of today 10 /18/24 for 3 years. My second unit is starting to run slow after a couple minutes of work. This is how the first one started to go bad. Second unit is right at 2 years old. And only fills my Marauder maybe twice a week. It sometimes goes a month without being used at all. It fills the gun from 1500 to 2500 in less than 3 minutes. As good as my Yong Heng for speed it may be a little faster but nothing to big of a difference. I just get tired of having to re seal the second stage of the Yong after what I feel is a ridiculously short period of time. Like 2 hours of you and it wont go past 2500 psi. And I never let it get hot and always let the coolant run until it is under 120 degrees. There are better units for less than $300 now that have built in inverter and automatic pressure shut off for $224. Also I tried repairing the first one and customer service was hard to acquire. Just my two cents.
How's about a complete breakdown of what you need to start PCP guns and maintain the compressors and related gear - maybe toss in a best quality and best value recommendation as well?
It actually has one in that block at the end and another one that can attach if needed. I don’t usually attach the extra one though. I live in a very dry climate and connecting to some of the guns is tough with the extra filter.
Great video brother
If you buy one definitely get the warranty. They are $37 as of today 10 /18/24 for 3 years. My second unit is starting to run slow after a couple minutes of work. This is how the first one started to go bad. Second unit is right at 2 years old. And only fills my Marauder maybe twice a week. It sometimes goes a month without being used at all. It fills the gun from 1500 to 2500 in less than 3 minutes. As good as my Yong Heng for speed it may be a little faster but nothing to big of a difference.
I just get tired of having to re seal the second stage of the Yong after what I feel is a ridiculously short period of time. Like 2 hours of you and it wont go past 2500 psi. And I never let it get hot and always let the coolant run until it is under 120 degrees. There are better units for less than $300 now that have built in inverter and automatic pressure shut off for $224.
Also I tried repairing the first one and customer service was hard to acquire.
Just my two cents.
How's about a complete breakdown of what you need to start PCP guns and maintain the compressors and related gear - maybe toss in a best quality and best value recommendation as well?
I have some plans for those topics. Needed gear, cost, etc.
@@LegacyAirguns Awesome, appreciated as I'm sure I'm not the only one considering it.
@@LegacyAirgunswaiting for that video
Any idea what the db is of the pump while running? I’m worried about how noisy those fans are.
Mine is not bad. The fans are simi noisy the pump is about 85 decibels.
Need to get a filter from Amazon for you fill whip so you don’t put moisture into your airguns , moisture will kill your o-ring seals.
It actually has one in that block at the end and another one that can attach if needed. I don’t usually attach the extra one though. I live in a very dry climate and connecting to some of the guns is tough with the extra filter.
Oke no moister filter ..at all 😅.Cheers m8 ..My cheap as vevor does the same with a moister filter ..And it does 2 minutes more with a real filter.
The moisture filter is in the carry handle. The air intake is on the end of that handle.
@@LegacyAirguns ah oke .thx for the awnser..😀
Francis Union
I am sure,this machine made in China.