Caution !!! Make sure the hose clamp ( jubilee clamp) is centered OVER the barb of the fitting.. In this example..it is half on and half off the spot in the hose with bibb inside !This will cause the clamp to cut into the tube and fail !!
I have 3/4” black pipe with shut off valve and I plan on running 60 feet of 1/2” ID hoSe with quick connect to 3/4 house and regulator on my 13hp 420cc engine. My question even though 2 others Including one guy who told me my lines to my 1” house line would give my 13hp generator 36,000BTU and my generator would only require 28,000 BTU’s. If you know what I’m explaining is he right can I use 60 feet of 1/2” and get the BTU’s needed another said all the 1/2”” needed And a guy who said 3/4” only 12 feet . But I’ve seen quite a few running on30 ft of 3/8” and my generator was made for gas so I can’t find any BTU’. Thanks
We have a Germania three way burner but was unable to find the right hose connector. Can you please tell me what do you call the gold metal that you first sprayed on? Is it a female flare? Hope to hear from you soon.
Hi, It's an european standard gas hose connector with W 21,8 x 1/14 lh screw (swivel-nut) and 6-8-10mm hose nipple. In hungarian language the swivel-nut "gáz hollander" "gázpalack hollander" "pb-gáz hollander" "pb gáz hollander". Searc for on google :) Have a nice day!
Philips was made to cam out! Designed to be shitty like cigarette lighter 12v connections. (philips was made for I believe ww2 factory assembly lines to prevent overtorqing)
Hi, It's an european standard gas hose connector with W 21,8 x 1/14 lh screw (swivel-nut) and 6-8-10mm hose nipple. In hungarian language the swivel-nut "gáz hollander" "gázpalack hollander" "pb-gáz hollander" "pb gáz hollander". Searc for on google :) Have a nice day!
Kedves Fényutas! Sehol sem találtam olyan csatlakozót, amelyet a videó első másfél percében szerelsz. PB-palackról megy amúgy gáztűzhelyre a vezeték... hol lehet ilyet kapni?
Szia, barkácsáruházakban, illetve épületgépészeti vagy gázszerelvény szaküzletben biztos találsz megfelelőt! (a videóban szereplő csatlakozóz a helyi "gázosboltban" vettem) Legyen szép napod!
Fenyutas ez ele teszel nyomascsokkentot? vagy a bal menetes siman ra mehet a palackra? katranyozni szeretnek de lofaszt nem ertek ehhez es vettem egy perzselo szettet de nincs csokkento benne :/ gondolom akkor nem is kell!
I tried to do it without anything but it felt impossible but then I cam here and when I saw him using the spray I didn't had one like it so I used cooking oil, it's pretty good and I managed to do it very easy
This is for gas right ? If so this is highly illegal using a water pipe clamp . There's specialised clamps with 2 ears that must be used on gas or oxygen hoses
Thats exactly how I put a screw driver straight through my hand. Put the thing you are trying to screw into a solid surface, dont hold it in your hand.
I was on the edge of my seat watching that screwdriver action.
Now that's funny
Caution !!! Make sure the hose clamp ( jubilee clamp) is centered OVER the barb of the fitting.. In this example..it is half on and half off the spot in the hose with bibb inside !This will cause the clamp to cut into the tube and fail !!
I have 3/4” black pipe with shut off valve and I plan on running 60 feet of 1/2” ID hoSe with quick connect to 3/4 house and regulator on my 13hp 420cc engine. My question even though 2 others Including one guy who told me my lines to my 1” house line would give my 13hp generator 36,000BTU and my generator would only require 28,000 BTU’s. If you know what I’m explaining is he right can I use 60 feet of 1/2” and get the BTU’s needed another said all the 1/2”” needed And a guy who said 3/4” only 12 feet . But I’ve seen quite a few running on30 ft of 3/8” and my generator was made for gas so I can’t find any BTU’. Thanks
Hi- do you have a link or a name for the first piece that you fitted please? The reduced and the nut? Thanks
Did u get the name of that weber hole nut and other side Lpg gas pipe?
What is the size of that hose?
Can you use WD40 as a lubricant??
We have a Germania three way burner but was unable to find the right hose connector. Can you please tell me what do you call the gold metal that you first sprayed on? Is it a female flare? Hope to hear from you soon.
Hi, It's an european standard gas hose connector with W 21,8 x 1/14 lh screw (swivel-nut) and 6-8-10mm hose nipple. In hungarian language the swivel-nut "gáz hollander" "gázpalack hollander" "pb-gáz hollander" "pb gáz hollander". Searc for on google :) Have a nice day!
Use a nut-driver to tighten the hose clamps. Flat-head screwdrivers slip out too easily and a ratchet/socket can over tighten it.
Philips was made to cam out! Designed to be shitty like cigarette lighter 12v connections. (philips was made for I believe ww2 factory assembly lines to prevent overtorqing)
What did you squirt down the hose
Thankyou very much - so helpful!
Hi, what is the name of that connector ?
Is that spray is dangerous for gas connection pipe
very cool, thanks
Where can I find that type of hose for high pressure burner? Does home depot have any?
Hi, I think, yes. It's a simple gas hose. Have a nice day!
what's the official name for the connector?
Hi, It's an european standard gas hose connector with W 21,8 x 1/14 lh screw (swivel-nut) and 6-8-10mm hose nipple. In hungarian language the swivel-nut "gáz hollander" "gázpalack hollander" "pb-gáz hollander" "pb gáz hollander". Searc for on google :) Have a nice day!
Thank you
How to connect 8 or 6 or 4 lpg cylinders rather than twin lgp cylinders?
Hi, I think all needed parts and manual are in the kit. Have a nice day!
Phaty paip ko kesy jodny lapeta paip hi Jabab jaldi dena plees
Kedves Fényutas! Sehol sem találtam olyan csatlakozót, amelyet a videó első másfél percében szerelsz. PB-palackról megy amúgy gáztűzhelyre a vezeték... hol lehet ilyet kapni?
Szia, barkácsáruházakban, illetve épületgépészeti vagy gázszerelvény szaküzletben biztos találsz megfelelőt! (a videóban szereplő csatlakozóz a helyi "gázosboltban" vettem) Legyen szép napod!
köszi a videot.mi az a spréééé?
Szilikon
Fenyutas ez ele teszel nyomascsokkentot? vagy a bal menetes siman ra mehet a palackra? katranyozni szeretnek de lofaszt nem ertek ehhez es vettem egy perzselo szettet de nincs csokkento benne :/ gondolom akkor nem is kell!
What is that spray, please let me know, thanks for uploading.
Hi, the spray is "silicone". Have a nice day!
I tried to do it without anything but it felt impossible but then I cam here and when I saw him using the spray I didn't had one like it so I used cooking oil, it's pretty good and I managed to do it very easy
@@Fenyutas what is the necessity of it (silicone)?
@@zomanpradhan7349 Hi, It is a lubricant for easier pushing of the pipe and the fitting. Have a nice day!
Name please bolt nut
I thought you needed a crimper.
The two pieces that connect the hose to the bottle
Hi, "awab hose clamp" and "hose union nut". Have a nice day!
This is for gas right ? If so this is highly illegal using a water pipe clamp . There's specialised clamps with 2 ears that must be used on gas or oxygen hoses
Nice
how to cut this type of gas pipe? can you make a video?
You are able to cut this pipe with a simple utility knife.
you can cut gas hose with a sharp knife, razor blade, or even with a hack saw.
commenting for algorithm
Pipe aur not ke bare mein bataya kya naam hai
Wrong kind of clamps!
Thats exactly how I put a screw driver straight through my hand. Put the thing you are trying to screw into a solid surface, dont hold it in your hand.
Those connectors can be a real b**ch to get inside the flexible hose, even with the lubricant...
Poor video … don’t waste time watching. No verbal instruction so no use!
Nice