More videos please. I enjoyed watching this. I’ve been in “art something or other” since 1980. I started with oil painting lessons, then water colored a while. I joined the Society of Decorative Painters in 1990 and went to their conventions and became a teacher. I did that at my huge dining room every week for about two years. I then moved to Dallas to take a job. I was sad that I wasn’t into art. I decided to make cards as videos that teach how to make them are all over the internet. I was not warned as to how Much I would spend on die cutting and cards stock and stamps. But the joy it gave me was worth every dime. I am 70 now, live alone in a senior complex and love my apartment. The LR is my craft room. The master BR is a den where the TV and sofa are. My bed is in the other bedroom. I don’t sleep there. I fall asleep on my coloring book in the den where I was watching videos on the TV screen. It’s been a great ride and my goodness how did I go on this long. But I will leave this comment as it is. Someone can perhaps say their life has been “crafty” too. I’ll be back but I won’t talk so much next time. I live in Farmers Branch, TX.
I have a lot of videos on my channel and I will continue to add more! Sounds like you are life long crafter like me! And a fellow Texan! I know where Farmer's Branch is! I live in Kyle, TX. I am so glad that you have found joy in making cards! I do hope that Inspire and help you!
Your comment put a smile on my face! I, too, am wholeheartedly pleased that card crafting has given you joy! (I’m also in my 70’s and thoroughly delight in the completion of a card well made!)
Instead of using wax paper with intricate dies, you can repurpose the wax-like sheet that remains when sheets of postage stamps are removed. Works great.
I'm pretty new to both stamping and die cutting (and embossing) and this was GREAT info for me. Especially my favorite = using dryer sheet or wax paper. Biggest, best, time saver for me. Thanks for the entire video. Loved it.
Thanks for all the great tips!!! I have an easier time getting my plates through my machine if I layer them staggered; I pull the top plate towards me a little bit. Then my 'sandwich' isn't hitting the tension rollers all at once! 🤗
A lot of great helpful tips Sharon! With that last tip where you cut 1st and then stamped. Have you tried cutting the image with the die, then fitting the stamp into the hole left by the die. Most of the stamps will slot right in exactly where they fit..Then pick up the stamp with the stamparatus lid. Then replace the piece that needs to be stamped into the hole, ink & stamp. It's almost the same as what you did but only uses one piece of card stock, & is just a bit quicker. It also saves a ton of time if your stamping multiples of the same thing for swaps, or Christmas cards etc
I like your honesty, its refreshing to see, mistakes aren't failures, just an opportunity to be creative! Loved your video, really helpful, thank you for sharing!
Glad it was helpful! Thank you so much for your kind words! I have another video that may also good for you since you are new. ua-cam.com/video/dkHE4ws_-kY/v-deo.html
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
I like the idea of using a sponge dauber to put glue on back of little die-cut pieces, I was using a glue stick which sometimes ripped the piece or a glue bottle which put too much glue on and oozed out everywhere.
Have you tried microdot tape runners, they only go on the back of the Die where they touch. All you do is dab them carefully where needed, pick up and place on your card. No messy glue, no dried up glue bottles, no spillage, no accidents with the glue going onto the front of your Die. Magic!!!
@@dorothyminton3994 👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Good tips so thank you. I have a little tip for you since you have trouble die cutting when the machine gets to the die. Try laying the die at an angle. If there is not a large "edge" that hits the roller plates all at once, it's easier to get the cutting started.
I am glad you enjoyed the tips. I think I should have had a little step stool so that the cutting on the video didn't look so hard! I do like your tip too! Thank you!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
I just got my die/emboss machine and these tips will really help!! Flipping the plates, the dryer sheet, the pad under the tiny words as you remove adhesive backing, the lint roller...all great!!
Hello from Waco Tx, I have been looking and looking at stamping and DC but I just did not think I could do it , now seeing this ,Here I go lol , I just love what you did ,Thank you so much
So happy it was helpful! Remember I do have the free download to help you remember too. txstampin.com/10-die-cutting-hacks-supercharge-card-making-skills/
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
The die goes through the machine so much easier it you put it on an angle so one part goes though before the rest of the die, it really makes a difference😊love your tips!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
I am new to all of this and I have to say, I enjoyed your video very much, love to hear you laugh, wonderful explanation of all the techniques. thank you!
I really enjoyed your video. Even though I am a somewhat seasoned card maker, I did learn a couple of new tricks. Just goes to show that you can teach an old dog new tricks. Thanks for taking the time to make this tip video. I greatly appreciated it.
i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Firstly thank you for your tips and ' how to do ' side of things. This is exactly what i needed to see as a beginner. Please dont take this the wrong way. I lake this the wrong way. I love your honesty when things havnt gone to plan. You didnt edit. Brilliant. We need to see what to do if its not going to plan. Ive thrown so many away because not perfect. Ive never seen a machine actually working. Usualy its done to one side and shown after cutting. Maybe a chance to edit out mistakes or issues. Im not saying thats the case with everyone post. I only have a midi die embosing machine. Just to see if its what i want to do. Its been brilliant and cards look professional. Types of glue and sticky tape a huge ' want to know' for use. So thank you for a brilliant video. Keep them comming. from Hereford Englan.
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
You are very welcome! You can see more about the Adhesive Sheets here www.stampinup.com/products/adhesive-sheets And the Take Your Pick Tool Here www.stampinup.com/products/take-your-pick
Back again...well, I also liked how you used the plain, already-die-cut flower and the Stamparatus to make that flower. I've never seen that tip before. Thank you again!!
OMG This sure is one Super Incredibly Outstanding Die Cutting Hack Tutorial!! Thanks so much for sharing!! I can’t thank you enough too for having such a Detailed tutorial too as I am a visual learner !!! GIRL YOU SO ROCK!!!! Joan Smith
i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Whew! Watching this made me exhausted! Glad I have a machine that runs on its own. My machine also has an embossing mat which works perfectly. Your laugh is great! TYFS ❤️🦋💜
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
HELLO SHARON! Great to be with you on this replay! WHAT FANTASTIC DIE-CUTTING HELPS! I’m a “seasoned” cardmaker but often I forget those “special tricks n’ helps” to make my cardmaking easier, especially w/die cutting! Your video was so helpful! I LOVE HAVING THE IDEAS/TIPS/HELPS IN ONE PLACE! YAY! :-))) I so appreciate your sharing your “goofs/struggles” (i.e. the flower stamp/die, etc) with us~~~often I chuckle, too, as I’ve “struggled” w/a similar issue! Haha! TFS, Sharon, and HAPPY STAMPIN’, CREATIN’ n’ TIPPIN’!!! ALWAYS enjoy your videos and creations! Hope you have a lovely weekend! Sending SMILES from Madison, WI! :-))))))
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Great tip! Thank you for joining us, I’m glad you enjoyed it! I invite you to hit subscribe and the bell for alerts. I go live on Monday and Thursdays!
First I would like to thank you very much for the download Blog Post October 9th 2021. I have read your article All about Sharon and was so moved. You certainly have inspired me in more ones than one Sharon. I am now a fan of your videos. Look forward to your ideas. THANK YOU SO MUCH FOR SHARING. NZ
I am so glad that you enjoyed the download! I always want to inspire others in any way I can! My story had a lot of twists and turns along the way but it doesn't stop me from doing what I love! Thank you for your kind words and following me!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Thank you for these great tips. And I really appreciate the download you provided as it will aid my not-so-great memory! You do such a good job making the videos. Blessings.
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Thank you so much, I really really enjoyed watching you show us all these amazing hacks for our die cutting machine. I’ve subscribed and given you a thumbs up 👍 too. Please stay safe and well too
You are so welcome! I am happy that you found my channel and this video! I hope that my other variety of videos here on my Channel are helpful too! Take care!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Thanks, Sharon, these hacks are so helpful. I actually really like the embossed snowflake - it looked better than the original one done on another machine. ❤️🇨🇦
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask
I cut my DSP cardboard into 6x6 squares and use them as shims for my old and well used die cut machine. Great tips btw. I love the “boo boo”. Beautiful!
I made my daughters Bridal Shower Invitations and Placed a dryer sheet between every 5 cards, Let me tell you I received so may compliments on the card smelling pretty
I always lay my die a little wonky so it doesn't go into the rollers straight... Just offset it a little bit. That way you don't get a "speed bump", and the guy goes through the rollers more smoothly. Thanks for sharing your tips!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️🕊️ all over the world 🙏🌍 I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
You are 😂 funny. You make everything look so enjoyable. Happy to see you also have difficulty with the Stamp Cut and Emboss Machine, I too am short and need a lower counter to use it with ease. The tips about the softener sheet and wax paper were very helpful.I also wondered about using the die as an embossing piece. Now I know❣️ I appreciate you sharing these secrets with us❣️❣️❣️😍
I am here to entertain! LOL! The struggle is real when we are short! My lower cabinet behind me is a piece of cake with the Stampin Cut & Emboss because it's the perfect height! So glad my tips were helpful to you! I will share my secrets anytime to help others!
More videos please. I enjoyed watching this. I’ve been in “art something or other” since 1980. I started with oil painting lessons, then water colored a while. I joined the Society of Decorative Painters in 1990 and went to their conventions and became a teacher. I did that at my huge dining room every week for about two years. I then moved to Dallas to take a job. I was sad that I wasn’t into art. I decided to make cards as videos that teach how to make them are all over the internet. I was not warned as to how Much I would spend on die cutting and cards stock and stamps. But the joy it gave me was worth every dime. I am 70 now, live alone in a senior complex and love my apartment. The LR is my craft room. The master BR is a den where the TV and sofa are. My bed is in the other bedroom. I don’t sleep there. I fall asleep on my coloring book in the den where I was watching videos on the TV screen. It’s been a great ride and my goodness how did I go on this long. But I will leave this comment as it is. Someone can perhaps say their life has been “crafty” too. I’ll be back but I won’t talk so much next time. I live in Farmers Branch, TX.
I have a lot of videos on my channel and I will continue to add more! Sounds like you are life long crafter like me! And a fellow Texan! I know where Farmer's Branch is! I live in Kyle, TX. I am so glad that you have found joy in making cards! I do hope that Inspire and help you!
Your comment put a smile on my face! I, too, am wholeheartedly pleased that card crafting has given you joy! (I’m also in my 70’s and thoroughly delight in the completion of a card well made!)
How wonderful!!! You will live many more years because you are keeping your mind active!!!
Instead of using wax paper with intricate dies, you can repurpose the wax-like sheet that remains when sheets of postage stamps are removed. Works great.
Also parchment paper
Oh that would work too!
I use the parchment paper cut outs similar to items made out of vellum.
I loved this I hope to be able to watch you more,when doo you come on.
I'm pretty new to both stamping and die cutting (and embossing) and this was GREAT info for me. Especially my favorite = using dryer sheet or wax paper. Biggest, best, time saver for me. Thanks for the entire video. Loved it.
You are welcome! I’m so glad it was helpful!
I only use parchment paper...I find that dryer sheets and waxed paper leave a residue on my dies that eventually makes them dull.
Thanks for all the great tips!!! I have an easier time getting my plates through my machine if I layer them staggered; I pull the top plate towards me a little bit. Then my 'sandwich' isn't hitting the tension rollers all at once! 🤗
That's a great idea! I am glad that you have figured out ways to make your die cutting easier! I am glad you enjoyed my tips today!
A lot of great helpful tips Sharon! With that last tip where you cut 1st and then stamped. Have you tried cutting the image with the die, then fitting the stamp into the hole left by the die. Most of the stamps will slot right in exactly where they fit..Then pick up the stamp with the stamparatus lid. Then replace the piece that needs to be stamped into the hole, ink & stamp. It's almost the same as what you did but only uses one piece of card stock, & is just a bit quicker. It also saves a ton of time if your stamping multiples of the same thing for swaps, or Christmas cards etc
You know I have! But thank you for sharing it here! I am glad you enjoyed the video!
I like your honesty, its refreshing to see, mistakes aren't failures, just an opportunity to be creative! Loved your video, really helpful, thank you for sharing!
Thanks so much! 😊. I am real and I am not afraid to show that! I am glad you find that refreshing! So happy that you enjoyed my video!
It’s been a long time since I have stamped, but this gives me incentive. Thank you. Love the chocolate dip.
You are so welcome! I hope you give it a try again!
Thank you... I learned much... Since I am new at this, I am going to save this to my art education file.... LOVE, LOVE, LOVE watching your video.
Glad it was helpful! Thank you so much for your kind words! I have another video that may also good for you since you are new. ua-cam.com/video/dkHE4ws_-kY/v-deo.html
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
I like the idea of using a sponge dauber to put glue on back of little die-cut pieces, I was using a glue stick which sometimes ripped the piece or a glue bottle which put too much glue on and oozed out everywhere.
I am glad that you enjoyed my tips! Thank you!
I often end up using my fingers...definitely going to try a sponge instead!
Have you tried microdot tape runners, they only go on the back of the Die where they touch. All you do is dab them carefully where needed, pick up and place on your card. No messy glue, no dried up glue bottles, no spillage, no accidents with the glue going onto the front of your Die. Magic!!!
@@dorothyminton3994 👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Good tips so thank you. I have a little tip for you since you have trouble die cutting when the machine gets to the die. Try laying the die at an angle. If there is not a large "edge" that hits the roller plates all at once, it's easier to get the cutting started.
I am glad you enjoyed the tips. I think I should have had a little step stool so that the cutting on the video didn't look so hard! I do like your tip too! Thank you!
GREAT tip to getting the die started to go through!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
I just got my die/emboss machine and these tips will really help!! Flipping the plates, the dryer sheet, the pad under the tiny words as you remove adhesive backing, the lint roller...all great!!
Then I am thrilled that you found this video! I do hope it helps you as you play with your new Emboss/Die cutting machine!
Thanks, most I knew, but the last one was golden!
Happy I could share something new with you!
Hello from Waco Tx, I have been looking and looking at stamping and DC but I just did not think I could do it , now seeing this ,Here I go lol , I just love what you did ,Thank you so much
You are so welcome!
I liked the technique of heat embossing the lower half of a word. And also appreciated how to dry emboss with a die.
Such fun techniques, right?! I hope that you have fun trying them Phyllis!
Thank you soooo much Sharon!!! I gotta watch again n take notes so remember all of them 😊
So happy it was helpful! Remember I do have the free download to help you remember too. txstampin.com/10-die-cutting-hacks-supercharge-card-making-skills/
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
It worked. I love the dipped chocolate...beautiful and so unique
Wonderful! So glad you enjoyed the tips!
The die goes through the machine so much easier it you put it on an angle so one part goes though before the rest of the die, it really makes a difference😊love your tips!
;(7
Y* 6
Thanks
Thank you. Yes it does! I am happy you loved my tips!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask
Dipped chocolate was my favorite. All the hacks were great. Thank you for sharing. ❤❤❤
You are so welcome! Hope you make some double dipped chocolate!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Love the video. Suggest you angle the die cut sideways - easier to demonstrate and hopefully easier on your back
Great tip! Thanks so much!
Great tips! I use parchment paper for my intricate dies and it works beautifully.
Oh! Parchment paper would work great! Thank you Denise! I am glad the tips were helpful!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Loved this tutorial. Many
I’ll try. Especially like the one using the stamparatus. Thanks.
You are so welcome! Enjoy creating!
I love your cards, and you demonstrate so clearly. Thanks for posting!
You are so welcome! So glad you find it helpful!
WOW Thanks Sharon!! I'm a new stamper with lots to learn and this was really fun 😂
Glad it was helpful!
I'm so glad I found your channel. It's very informative, and I love your personality. So hopefully I'll see you a lot in the future!
I’m glad you enjoyed it! I invite you to hit subscribe! I go live twice a week, Monday and Thursday!
I am new to all of this and I have to say, I enjoyed your video very much, love to hear you laugh, wonderful explanation of all the techniques. thank you!
Welcome aboard! I’m so glad it was helpful for you!
I really enjoyed your video. Even though I am a somewhat seasoned card maker, I did learn a couple of new tricks. Just goes to show that you can teach an old dog new tricks. Thanks for taking the time to make this tip video. I greatly appreciated it.
Glad it was helpful! I totally agree! We can always learn new tips in card ! Thanks for watching!
i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Loved all the tips, plus the added ones by your fans! Thanks all!
Glad you like them! Thank you!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
thanks for all the great hints. the cards are so creative. thank you.
You are so welcome!
Thanks. I really loved watching this video - so many good practical tips.
Glad it was helpful!
Sharon thanks for sharing your hacks! My faves are the partial die cutting and the hack with the stamperatus.
You’re welcome!
I really enjoyed and appreciated this tutorial. Thanks I learned a lot. I'm new to this craft and this was great.
Glad it was helpful!
Firstly thank you for your tips and ' how to do ' side of things. This is exactly what i needed to see as a beginner. Please dont take this the wrong way. I lake this the wrong way. I love your honesty when things havnt gone to plan. You didnt edit. Brilliant. We need to see what to do if its not going to plan. Ive thrown so many away because not perfect. Ive never seen a machine actually working. Usualy its done to one side and shown after cutting. Maybe a chance to edit out mistakes or issues. Im not saying thats the case with everyone post. I only have a midi die embosing machine. Just to see if its what i want to do. Its been brilliant and cards look professional. Types of glue and sticky tape a huge ' want to know' for use. So thank you for a brilliant video. Keep them comming. from Hereford Englan.
Thank you for watching, I'm glad it was helpful for you!
Loved the "dipped chocolate" hack. Thanks!
You are so welcome! I am glad you enjoyed that tip!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Thank you Sharon. Some wonderful tips.
You are so welcome!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Loved Loved the tips, Thank You for sharing!!
You are very welcome! So glad the tips were helpful!
I’ve been stamping a long time and still am getting great tips from you Sharon! Thank you!
I'm so glad! You are very welcome!
OMG I just watched your die hacks… the last one of how to line up your dies to the stamped image OMG so easy thank you, thank you,THANK YOU 😊
You are so welcome!
Thank you, yrs I would love to find out more about double stick sheets and the pick- brush for the dies
You are very welcome! You can see more about the Adhesive Sheets here www.stampinup.com/products/adhesive-sheets
And the Take Your Pick Tool Here www.stampinup.com/products/take-your-pick
Sharon, I never knew how to do partial dies - thanks for the great tips.
You’re welcome!
Back again...well, I also liked how you used the plain, already-die-cut flower and the Stamparatus to make that flower. I've never seen that tip before. Thank you again!!
Thanks so much 😊. I am so glad this video was helpful to you!
OMG This sure is one Super Incredibly Outstanding Die Cutting Hack Tutorial!! Thanks so much for sharing!! I can’t thank you enough too for having such a Detailed tutorial too as I am a visual learner !!! GIRL YOU SO ROCK!!!!
Joan Smith
You are so welcome! I too am a visual learner so I get you!
i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
These are really beautiful cards. Love the stamp and stencil. I can't color very well so I love the idea of stenciling the color. Judy - USA
Thank you so much! I am so glad to hear that I shared something that is helpful for you!
Thanks for the tips,including the lint roller!
You’re welcome
The lint roller! What a simple but effective tip!
I am glad you enjoyed that tip!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Loved the video. The 2 last hacks were my favorite. VERY HELPFUL. Appreciate you!!!
Awesome! Thank you! I am happy to help!
i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Thank you . I will put in practice. Very helpful.
I'm glad you found it helpful!
Thank you for your hacks. Very good . I will use them on my cards.
Glad you like them!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Tfs. These were so helpful, I will be using these great ideas. Thanks Sharon.
Glad it was helpful!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Whew! Watching this made me exhausted! Glad I have a machine that runs on its own. My machine also has an embossing mat which works perfectly. Your laugh is great! TYFS ❤️🦋💜
Hahaha! I was tired after doing it too! I hope my laugh makes you smile! I also hope some of my tips were helpful!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Great tips. I love the embossed snow flake that was not intentional! It’s beautiful.
Thanks so much! 😊 Sometimes there are happy mistakes!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Thank you for sharing. Very nice work !
You are welcome! Many thanks!
So many great ideas! So helpful especially that last one! I always have the same problem. Thanks
Glad it was helpful!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Great tips for our book love the triple look (last tip) don’t waste those scraps use them on a card yea❤😊
Yes! Thank you!
Add my thanks to all the others!! Great tip on doing the partial cut and also the last one with the stamparatus and the red flower.
Awesome! Thank you! I am so glad that these hacks were helpful!
wonderful diecutting hacks, thanks for showing them!
Thank you! You are very welcome!
Thank you Sharon...love all your tips...especially the adhesive back tip!!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Who knew! Thank you for all the tips and tricks. You explain things so well; it is a pleasure to watch your videos.
You are so welcome! So happy that these were helpful!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Oh my!! I love the last tip. I, too, always struggle getting the dies to line up. Thank you:)
You are welcome!
i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
HELLO SHARON! Great to be with you on this replay! WHAT FANTASTIC DIE-CUTTING HELPS! I’m a “seasoned” cardmaker but often I forget those “special tricks n’ helps” to make my cardmaking easier, especially w/die cutting! Your video was so helpful! I LOVE HAVING THE IDEAS/TIPS/HELPS IN ONE PLACE! YAY! :-))) I so appreciate your sharing your “goofs/struggles” (i.e. the flower stamp/die, etc) with us~~~often I chuckle, too, as I’ve “struggled” w/a similar issue! Haha! TFS, Sharon, and HAPPY STAMPIN’, CREATIN’ n’ TIPPIN’!!! ALWAYS enjoy your videos and creations! Hope you have a lovely weekend! Sending SMILES from Madison, WI! :-))))))
Hey Judith! I am so glad that you enjoyed my video! Thank you! You know me if I make a mistake I own it and try to show a fix!
@@TxStampinSharon I feel I “do know you”, and it’s “one” of the things I so enjoy about you, my “virtual” Stampin’ friend! SMILES! :-)))))
Loved that last tip with the stamparatus! Always good tips from you Sharon. Thanks for sharing.
You are so welcome! II am glad that you enjoyed the Die Cutting tips video!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Just Amazing thanks for sharing 👍💐💐💐
You’re so welcome!
Love the half embossed chocolate. Thanks for all the hints.
I am so glad! You are very welcome!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Great tips, thanks for sharing. I have shared this video with a few friends.
Thanks for sharing!! I am so glad you found these tips helpful!
Love the branch semi cut idea.
Glad you like it!
Love all the suggestions, thank you!
You are so welcome!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Your hacks are awesome thank you for sharing ☺️
You are welcome!
Hints are great! Very, very helpful! Thank you for sharing!
Glad it was helpful!
Sharon, wonderful tips! Thanks so much for sharing!
You are so welcome!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Thanks for sharing. I especially liked how you partial die cut the tree!
You are very welcome! Glad you enjoyed that tip!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
HI there thank you for sharing your Awesome idea's I have now Subscribed too your inspiration 🌸🌸🌸🌸
Yay! Thank you so much for following me!
Awesome hacks!!! Thank you very much!!!
🌸🌼💐💖🌸🌼💐💖🌸🌼💐💖
Glad you loved them! Thank you!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
These were awesome tips. Thank you.
You are welcome!
I just found you today. Thank you for these tips. A little hint for embossing if machine needs it add a thin piece of material 😉❤️
Great tip! Thank you for joining us, I’m glad you enjoyed it! I invite you to hit subscribe and the bell for alerts. I go live on Monday and Thursdays!
Thanks for all the tips!
You are very welcome!
Great ideas and great giggle
😂😂😂😂I am glad it was helpful!😂😂😂😂
Thank you so much for the great tips! Amazing
You’re welcome!
Thanks for all your work
You are so welcome!
Awesome! GREAT ideas! have gotten frustrated with the detailed dies!
Thank you! I hope my tips helps you with your detailed dies!
This was very helpful, thank you
You are welcome!
First I would like to thank you very much for the download Blog Post October 9th 2021. I have read your article All about Sharon and was so moved. You certainly have inspired me in more ones than one Sharon. I am now a fan of your videos. Look forward to your ideas. THANK YOU SO MUCH FOR SHARING. NZ
I am so glad that you enjoyed the download! I always want to inspire others in any way I can! My story had a lot of twists and turns along the way but it doesn't stop me from doing what I love! Thank you for your kind words and following me!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
You had me laughing with the embossed snow flake! Great video
Thank you! I’m glad you enjoyed it!
I learned a few new ideas. Can't wait to work with you on the Summer retreat coming up;
Wonderful! I am happy that I was able to help you with some of these hacks! See you at the Creativate Summer Retreat!
Thank you for these great tips. And I really appreciate the download you provided as it will aid my not-so-great memory! You do such a good job making the videos. Blessings.
You are so welcome! I am glad to know that the downloads are helpful! Thank you so much!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Thank you so much Sharon! Great information to use daily! 🥰
Glad it was helpful!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Love the hints thank you!!
You are so welcome!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
amazing and easy techniques for die cutting. Thank you very much. :)
I am so glad this was a helpful video! You are very welcome!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅✅🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
I take it back! I watched this before when I first found you! Great video!
Awesome! Thank you! So enjoyed our phone chat yesterday!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️✅all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
These tips are great tha k you for sharing
You are so welcome! I am glad that they were helpful!
I love all your tips, thanks so much for sharing.
You are so welcome!
I struggle to get my stamping and my dies lined up properly and that last hack was genius.
I hope it helps!
Thank you so much, I really really enjoyed watching you show us all these amazing hacks for our die cutting machine. I’ve subscribed and given you a thumbs up 👍 too. Please stay safe and well too
You are so welcome! I am happy that you found my channel and this video! I hope that my other variety of videos here on my Channel are helpful too! Take care!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Thanks, Sharon, these hacks are so helpful. I actually really like the embossed snowflake - it looked better than the original one done on another machine. ❤️🇨🇦
I am so glad they were helpful! You are right the second one turned out way better!
@@TxStampinSharon 😘
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask
I cut my DSP cardboard into 6x6 squares and use them as shims for my old and well used die cut machine. Great tips btw. I love the “boo boo”. Beautiful!
That is a great idea! Then you don't have to sacrifice cardstock! I am glad that my tips were helpful!
I love hack helps. Thanks
Yay! I hope these were helpful!
I made my daughters Bridal Shower Invitations and Placed a dryer sheet between every 5 cards, Let me tell you I received so may compliments on the card smelling pretty
LOL! I am sure they loved the fresh laundry smell! But the dryer sheets work!
Sharon, squaring up your plates will help them move through the die cutting machine easier. Thanks
Thank you for the tip!
I always lay my die a little wonky so it doesn't go into the rollers straight... Just offset it a little bit. That way you don't get a "speed bump", and the guy goes through the rollers more smoothly.
Thanks for sharing your tips!
Glad you enjoyed my tips. Yes that is another tip I could have shared!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Always love your hints they are very helpful!
I am very glad you think so!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
Great tips! Thank you! Love the partial cut card.
You are so welcome! I am so glad this was helpful!
👋 i hope you're safe over there? I hope this year brings happiness prosperity love and peace 💞❤️🕊️🕊️ all over the world 🙏🌍
I'm originally from Canada currently living in Key West Florida and you where are you from if i may ask?
You are 😂 funny. You make everything look so enjoyable. Happy to see you also have difficulty with the Stamp Cut and Emboss Machine, I too am short and need a lower counter to use it with ease. The tips about the softener sheet and wax paper were very helpful.I also wondered about using the die as an embossing piece. Now I know❣️ I appreciate you sharing these secrets with us❣️❣️❣️😍
I am here to entertain! LOL! The struggle is real when we are short! My lower cabinet behind me is a piece of cake with the Stampin Cut & Emboss because it's the perfect height! So glad my tips were helpful to you! I will share my secrets anytime to help others!
Cath S A very helpful video, thank you for sharing.
You are so welcome!